摘要：Solar-driven catalysis represents a promising strategy and an important approach to provide clean energy and renewable *** decades of research on solar-driven catalysis,scientists are now focusing on module design,mechanistic study,and practical application along with catalyst design[1–6].In the

摘要：A simple method for preparation of presulfided eggshell CoMoS/γ-Al2O3 catalysts with sharp boundary is developed, through which the eggshell thicknesses of Co and Mo could be easily regulated by controlling the impregnation time. According to the results characterized by EDS, XRD, HRTEM and FT-IR of adsorbed CO, the active component structures, the nature and/or the amount of active sites on the eggshell catalyst are similar to these on the uniform catalyst. The evaluation results of the catalytic performance in selective hydrodesulfurization （HDS） of FCC gasoline show the presence of significant internal diffusion inhibition effect on HDS of S-compounds especially in the uniform catalyst. Compared with uniform catalyst, the eggshell catalyst could remarkably reduce such an internal diffusion inhibition effect due to a shortened diffusion path of the reactants, thus showing higher HDS activity and selectivity.

摘要：Mg-Al alloys have excellent strength and ductility but relatively low thermal conductivity due to Al *** accurate prediction of thermal conductivity is a prerequisite for designing Mg-Al alloys with high thermal ***,databases for predicting temperature-and composition-dependent thermal conductivities must be *** this study,Mg-Al-La alloys with different contents of Al2La,Al3La,and Al11La3phases and solid solubility of Al in the α-Mg phase were *** influence of the second phase(s) and Al solid solubility on thermal conductivity was *** results revealed a second phase transformation from Al_(2)La to Al_(3)La and further to Al_(11)La_(3)with the increasing Al content at a constant La *** degree of the negative effect of the second phase(s) on thermal diffusivity followed the sequence of Al2La>Al3La>Al_(11)La_(3).Compared with the second phase,an increase in the solid solubility of Al in α-Mg remarkably reduced the thermal *** the basis of the experimental data,a database of the reciprocal thermal diffusivity of the Mg-Al-La system was established by calculation of the phase diagram (CALPHAD)*** a standard error of±1.2 W/(m·K),the predicted results were in good agreement with the experimental *** established database can be used to design Mg-Al alloys with high thermal conductivity and provide valuable guidance for expanding their application prospects.

摘要：Electrochemical CO2 reduction to chemicals or fuels presents one of the most promising strategies for managing the global carbon balance, which yet poses a significant challenge due to lack of efficient and durable electrocatalyst as well as the understanding of the CO2 reduction reaction(CO2RR) *** from the large surface area, high electrical conductivity, and tunable structure, carbon-based metal-free materials(CMs) have been extensively studied as cost-effective electrocatalysts for *** development of CMs with low cost, high activity and durability for CO2RR has been considered as one of the most active and competitive directions in electrochemistry and material *** this review article,some up-to-date strategies in improving the CO2RR performance on CMs are ***, the approaches to optimize the adsorption of CO2RR intermediates, such as tuning the physical and electronic structure are introduced, which can enhance the electrocatalytic activity of CMs ***, some design strategies are proposed to prepare CMs with high activity and selectivity for CO2RR.

摘要：Perovskite solar cells are one of the most promising alternatives to conventional photovoltaic devices, and extensive studies are focused on device optimization to further improve their performance. A compact layer of TiO2 is generally used in perovskite solar cells to block holes from reaching the fluorine-doped tin oxide electrode. In this contribution, we engineered a TiO2 compact layer using Nb doping, which resulted in solar cells with a power conversion efficiency （PCE） of 10.26%, which was higher than that of devices with the same configuration but containing a pristine TiO2 compact layer （PCE = 9.22%）. The device performance enhancement was attributed to the decreased selective contact resistance and increased charge recombination resistance resulting from Nb doping, which was revealed by the impedance spectroscopy measurements. The developed strategy highlights the importance of interface optimization for perovskite solar cells.

摘要：Considering generator rotor and valve by external disturbances for turbine regulating system, the nonlinear large disturbance attenuation controller and parameter updating law of turbine speed governor system are designed using backstepping method. The controller not only considers transmission line parameter uncer-tainty, and has attenuated the influences of large external disturbances on system output. The nonlinear con-troller does not have the sensitivity to the influences of external disturbances, but also has strong robustness for system parameters variation, which is because of the transmission line uncertainty being considered in internal disturbances. The simulation results show that the control effect of the large disturbance attenuation controller more advantages by comparing with the control performance of conventional nonlinear robust controller.

摘要：Serum biomarkers in the form of proteins （e.g. cluster of differentiation-44 （CD44）） have been demonstrated to have high clinical sensitivity and specificity for disease diagnosis and prognosis. Owing to the high sample complexity and low molecular abundance in serum, the detection and profiling of biomarkers rely on efficient extraction by materials and devices, mostly using immunoassays via antibody-antigen recognition. Antibody-free approaches are promising and need to be developed for real-case applications in serum to address the limitations of antibody-based techniques in terms of robustness, expense, and throughput. In this work, we demonstrated a novel approach using hyaluronic acid （HA）-modified materials/devices for the extraction, detection, and profiling of serum biomarkers via ligand-protein interactions. We constructed Fe304@SiOa@HA particles with different sizes through layer-by-layer assembly and for the first time applied HA-functionalized particles in the facile extraction and sequence identification of CD44 in serum by mass spectrometry. We also first validated HA-CD44 binding through electrochemical sensing using HA- modified electrodes in both standard solutions and diluted serum samples, achieving a detection limit of -0.6 ng/mL and a linear response range from I ng/mL to 10 ~tg/mL. Furthermore, we performed profiling of HA-binding serum proteome, providing a new preliminary benchmark for the construction of future databases, and we investigated selected surface chemistries of particles for the capture of proteins in serum. Our work not only resulted in the development of a platform technology for CD44 extraction/detection and HA-binding proteome identification, but also guided the design of ligand affinity-based approaches for antibody-free analysis of serum biomarkers towards diagnostic applications.

摘要：微生物菌株的改造优化是现代工业生物技术的核心,其中工业微生物底盘细胞的构建已成为合成生物学的研究热点之一。基于合成生物学“设计-构建-测试-学习”策略,对微生物底盘细胞理想设计和改造是优良细胞工厂构建的重要手段,本文对合成生物学和微生物底盘细胞的改造优化策略进行了相关概述,同时总结了基于合成生物学各工业微生物底盘细胞的构建及应用,最后对在构建底盘细胞时所遇到的障碍及未来的前景进行了展望,以推动具有优良性状的微生物细胞工厂的构建。

摘要：In order to investigate the real-time cracking behavior of each component of a composite with strong interfacial bonding among lamellae, Ti-18 Nb(at.%) composite was prepared by spark plasma sintering(SPS), followed by hot-rolling, annealing, and quenching. The microstructure and mechanical properties were characterized by scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), micro-region X-ray diffractometry(MRXRD), nanoindentation, and in-situ scanning electron microscopy tensile testing. The results show that the Ti-18 Nb consists of Ti-enriched, diffusion and Nb-enriched zones, and the sharp Nb gradient across different zones leads to inhomogeneous distribution of phase and mechanical properties. A remarkable finding is that the diffusion zones not only enable the cooperative deformation between the brittle Ti-enriched zones and the ductile Nb-enriched zones but also act as the crack-arresters to prevent the local cracks in the Ti-enriched zones from further propagating across the composite.

摘要：超临界CO_(2)压裂是开发利用非常规油气资源的有效手段之一,然而超临界CO_(2)的低黏度特性导致了携沙性差和滤失量大的问题,超临界CO_(2)增稠剂的研发是解决此项问题的必要措施。文中将已报道的超临界CO_(2)增稠剂研究分为含氟类、聚硅氧烷类和烃类3种CO_(2)增稠剂,并进行了系统的研究分析,总结了超临界CO_(2)增稠剂分子设计思路。得出CO_(2)增稠剂分子设计原则:(1)从基团功能方向设计,新型CO_(2)增稠剂应由亲CO_(2)基团和CO_(2)增稠基团构成,保证增稠剂具备一定的CO_(2)溶解性和增稠性;(2)基团自身属性方向设计,基团自身主链应具有较好的柔顺性、低内聚能和较高的混合自由能。在超临界CO_(2)增稠剂的研究中,不仅要关注聚合物的溶解性与增稠性能,还可引入纳米材料这类新型材料来扩充超临界CO_(2)增稠剂分子的研究思路。