摘要：In this paper,the authors analyze the stability of a class of interconnected systems withsubsystem unmodeled dynamics and dynamic interactions employing decentralized adaptive controllersdesigned by Wen,Zhou,and Wang (2008) in the presence of actuator *** will be shown that theglobal stability of the remaining closed-loop system is still ensured and the outputs are also regulatedto zero when some subsystems break down.

摘要：探讨了汉字图形在建筑设计中的作用和意义,对其在建筑设计中的应用手法进行归类和整理,归纳出了2种具体的运用形式:一是运用汉字图形来进行建筑布局,二是利用汉字图形来进行建筑装饰,同时还分析了应用时应注意的几个要点,希望能更好地将汉字图形这一中国特有的艺术形式运用到我国现代建筑设计中,进而使我国的建筑设计更具民族特色和文化品位。

摘要：In this paper the design problem of perfect-reconstruction cosine-modulated QMF banks has been formulated as a quadratic-constrained least-squares (QCLS) minimization problem in which all constrained matrices of the QCLS optimization problem are symmetric and positive definite. A cost function which is a convex function of desired prototype filter coefficients is constructed so that this kind of QCLS optimization problems can be efficiently solved. So a global minimizer of this problem can be easily obtained. Results of two design examples are presented to support the derivations and analyses.

摘要：All digital implementation of receiver is a main topic on digital communication recently. The design of interpolation filter is one of the important problems for all digital implementation of receiver. In this paper, for full response linear modulation signal, a interpolation criterion is proposed. An interpolation formula is presented on bandwidth-limited transmission signal. For example, using the raised cosine roll off function as the system pulse response, the feasibility and effectiveness on the interpolation formula are certified by theoretical and numerical analysis. The computer simulation result on 16-QAM signal is given.

摘要：本文研究在满足可靠性要求时的结构优化设计方法。首先分析结构的主要破坏模式,对每一个主要破坏模式用可靠性指标表示结构的可靠度。可靠性指标是设计变量的函数,将其线性化,在各主要破坏模式的可靠性指标均满足要求的条件下,使结构重量最小,形成一个线性规划问题。由此解出结构满足可靠性要求的优化设计变量。进而考虑各主要破坏模式的相关性,检查结构的可靠度能否满足要求,并对优化设计变量进行修正。通过算例证实本文提供的方法是在满足可靠性要求时结构优化设计的有效的工程方法。

摘要：动漫设计与制作专业要求学生在动画设计的基础上,了解漫画设计的原则及表现技巧,熟悉影视及各个媒体领域的制作方法,掌握一定的理论知识及专业技能.专业中包括很多课程,不同课程具有各自的特性,统一的考核方式无法适应所有课程,所以,必须根据特点来选择适合的考核方式.

摘要：Interference alignment(IA) is suitable for cognitive radio networks(CRNs).However, in IA spectrum sharing(SS) process of general underlay CRNs, transmit power of cognitive radio transmitters usually should be reduced to satisfy interference constraint of primary user(PU), which may lead to low signalto-noise-ratio at cognitive radio receivers(CRRs). Consequently, sum rate of cognitive users(CUs) may fall short of the theoretical maximum through IA. To solve this problem,we propose an adaptive IA SS method for general distributed multi-user multi-antenna CRNs. The relationship between interference and noise power at each CRR is analyzed according to channel state information, interference requirement of PU, and power budget of CUs. Based on the analysis, scenarios of the CRN are classified into 4 cases, and corresponding IA SS algorithms are properly designed. Transmit power adjustment, CU access control and adjusted spatial projection are used to realize IA among CUs. Compared with existing methods, the proposed method is more general because of breaking the restriction that CUs can only transmit on the idle sub-channels. Moreover, in comparison to other five IA SS methods applicable in general CRN, the proposed method leads to improved achievable sum rate of CUs while guarantees transmission of PU.

摘要：Multi-service SDH networks support both packet- and circuit-switched traffic. Optimal design of such a network means to guarantee the circuit connections and configure a logical packet-switched topology with lowest congestion. This letter first formulates the problem as a mixed integer linear programming, which achieves optimal solution but has high computation. Then a heuristic algorithm is proposed to yield near-optimal solution efficiently. Performance of the algorithm is verified by an example.

摘要：Efficient reconfigurable field programmable gate array （FPGA） architectures for the MD6-224/256/384/512 Hash algorithm are proposed in this article. The basic iterative compact design requires 923 ALMs and achieves a throughput ranging from 225 Mbit/s to 394 Mbit/s at a maximum frequency of 198 MHz. The 32-step-urtrolled high-throughput design requires 7 090 ALMs and achieves a throughput ranges from 5 776 Mbit/s to 9 490 Mbit/s at a maximum frequency of 173 MHz. The simulation results show that high flexibility and efficient FPGA implementation of the MD6 Hash function is achieved.

摘要：A stepped-section ring consists of two rectangular section rings,a big ring and a small ring,joined *** kind of ring is difficult to process by the ring rolling technique because of its complex cross-sectional *** a reasonable blank design is *** this paper,four blank designs,one is a rectangular cross-section and the other three are stepped-sections with different step volumes,are proposed and compared with each other using theoretical analysis,FE simulation and *** is shown that three of the designs can lead to volume flow from small ring into big ring during rolling,which is disadvantageous for shape formation and dimensional precision;however,the other design may result in good ring shape and high dimensional ***,the optimal blank design is determined to be the one in which the volumes of the big and small rings of the initial blank are equal to those of the final rings,respectively.