摘要：在所有砖块的大小和颜色都相同的前提下,六块乐高砖能够创造出多达915103765种组合,两块乐高砖就可以创造出24种不同的组合。换句话说,不同尺寸和颜色的砖块在创造变化方面几乎没有限制。乐高砖块的生产量如今已经达到人均八十块。从1932年创立至今,在近百年的时间里,乐高已经成为全球最畅销的玩具大王。

摘要：A power management unit （PMU） chip supplying dual panel supply voltage, which has a low electro-magnetic interference （EMI） characteristic and is favorable for miniaturization, is designed. A two-phase charge pump circuit using external pumping capacitor increases its pumping current and works out the charge-loss problem by using bulk-potential biasing circuit. A low-power start-up circuit is also proposed to reduce the power consumption of the band-gap reference voltage generator. And the ring oscillator used in the ELVSS power circuit is designed with logic devices by supplying the logic power supply to reduce the layout area. The PMU chip is designed with MagnaChip＇s 0.25 μ high-voltage process. The driving currents of ELVDD and ELVSS are more than 50 mA when a SPICE simulation is done.

摘要：发酵过程生物参数的在线检测,是获得发酵过程生物信息的重要手段,也是进行合理最优控制的基础。但是,目前许多生物量只能离线检测,不能够为实时的控制系统利用。因此提出了基于图像处理技术的生物反应器浓度在线检测系统,系统由反应液循环与控制装置、反应液浓度光学检测装置、图像采集与处理装置、计算机以及相应的处理软件组成。通过与分光光度计的实验比较,证实了所设计的系统可以用于生物反应器浓度的在线测量,为实现发酵过程生物参数的在线检测提供了值得借鉴的设计思路和实现方法。

摘要：一对夫妇在墨西哥的海滩上散步。妻子说:“我不想拍照,因为我的照片看起来不怎么样,不如你另一个朋友分享的照片好看?”丈夫告诉她,那是因为那位朋友使用了滤镜。然后妻子她说:“既然你这么了解,那你之前肯定有滤镜。”这对夫妇是Instagram的首席执行官凯文·西斯特罗姆(KevinSystrom),以及他当时的女友、现在的妻子妮可·舒茨(Nicole Schuetz)。那个滤镜就是X-ProII,Instagram的第一个滤镜。

摘要：百货店正成为零售和社交活动的“幸福目的地”。联想到“百货店”这个词汇，我们的眼前就浮现出举家同游的美好景象。早在50年前，在美国的各大城市，这曾经是司空见惯的情景。而现如今，大型零售设施的设计变革，文化与时尚的种种创新，都正在地球的另一端上演，特别是在韩国的首尔。

摘要：3D solid models for parts with regular-form surfaces (PRFSs) are effectively generated using traditional parametric design techniques. A new model is obtained by changing some parameters defining the model. The parts with free-form surfaces (PFFSs), however, cannot be defined by several parameters. Usually they are defined by some geometric elements like profile curves. The traditional parametric design approaches have not easily dealt with the PFFSs. A method for generating a solid model and an engineering drawing for PFFSs is proposed in this paper: First, the new profiles are generated from input point data. Second, the profile information is extracted from the existing model. Last, the old profiles are replaced with the new profiles. This method can preserve the associative information of the existing model and automatically generate the drawing including views, dimen- sions, and annotations. The proposed method has been implemented using a commercial CAD/CAM system, Unigraphics, and API functions written in C-language, and were applied to the blades of a turbine generator. Some illustrative examples are pro- vided in order to show the effectiveness of the proposed method.

摘要：To enhance machining efficiency,tool change time has to be ***,for an automatic tool changer attached to a machining center,the tool change time is to be *** the automatic tool changer is a main part of the machining center as a driving *** static attributes of the automatic tool changer using the commercial code,ANSYS Workbench V12,were tried to *** the optimum design of automatic tool changer arm was proposed by performing the multi-stage optimum *** shape optimization of the automatic tool changer was proposed and the result was verified to obtain acceptable *** is possible to obtain an optimized model in which the maximum deformation,maximum stress,and mass are reduced by 10.46%,12.89% and 9.26%,respectively,compared with those of the initial ***,the results between conventional method by the design of experiments and proposed method by the multi-stage optimum design method were compared.

摘要：The wear rate between the rotors of a hypotrochoidal gear pump is *** the knowledge of shape design on the rotors,the contact stresses without hydrodynamic effect between the rotor teeth were evaluated through the calculation of the Hertzian contact *** on the above results and the sliding velocity between the rotors,a genetic algorithm (GA) was used as an optimization technique forminimizing the wear rate proportional factor (WRPF).The result shows that the wear rate or the WRPF can be reduced considerably,*** 12.8%,throughout the optimization using GA.

摘要：The shape and thickness of the dome were investigated with the aim of optimizing the type II CNG storage vessels by using a finite element analysis technique. The thickness of the liners and reinforcing materials was optimized based on the requirement of the cylinder and dome parts. In addition, the shape of the dome, which is most suitable for type lI CNG storage vessels, was proposed by a process of review and analysis of various existing shapes, and the minimum thickness was established in this sequence： metal liners, composite materials and dome parts. Therefore, the new proposed shape products give a mass reduction of 4.8 kg（5.1%）

摘要：An optimal configuration of the flux-reversal linear synchronous motor (FRLSM) with the optimal number of attachment permanent magnets (PMs) was presented. The optimal model of 2 000 N was designed to reduce the detent force by redesigning the air-gap structure and skewing. The design parameters,mover PMs and stator core,were selected for optimal design by DOE. The thrust and the detent force of the designed optimal models were compared by finite element analysis (FEA). As a result,the thrust of the optimal model is slightly decreased by 1.97% compared with the basic model,and the detent force of the optimal model is greatly decreased by 88.47% compared with the basic model.