摘要：通过使用构件管理模型来重新设计基于WEB的协作系统框架.构件管理模型通过关键字、内容和配置信息获得构件与高级开发知识间的连接信息.构件管理模型可以通过每个构件的关键字和内容信息来表示构件之间的连接关系,它也支持特定应用子系统的设计知识.引入构件管理模型来实现更为容易的框架构件管理以及框架自身更为方便的使用.

摘要：德富芦花的《不如归》不但是日本近代文学史上影响深远的长篇小说,而且对于韩中两国现代性文学的形成,起了很重要的作用。两国对《不如归》的接受都是从小说的翻译改编开始的,但在剧本的具体接受途径上却有明显差异。韩中两国《不如归》的演出,标志着现代性戏剧脱离初期阶段而演变为以家庭悲剧为主的大众戏剧艺术。中国认为《不如归》中的悲剧所在是"情",而韩国则扩展为"幽恨",从中获得比原作更为强烈的戏剧性艺术感受。

摘要：在前期工作的基础上,设计合成了一系列吡啶乙醇类双[N,O]环钯配合物,以该类环钯配合物为催化剂,通过Fujiwara-Moritani反应,在相对温和的反应条件下(2 mol%催化剂,30℃,空气环境中)即可高效实现噻吩、呋喃类芳杂环与各类烯烃的偶联,并以中等到高等的分离产率得到相应的目标化合物.进一步通过动力学实验和ESI(+)-MS同步检测,推测该反应是通过协同的金属化/去质子化(CMD)机理进行.

摘要：The direct current-direct current （DC-DC） converter is designed for 1 T static random access memory （SRAM） used in display driver integrated circuits （ICs）, which consists of positive word-line voltage （VpwL）, negative word-line voltage （VinyL） and half-VDD voltage （VHDo） generator. To generate a process voltage temperature （PVT）-insensitive VpWL and VNWL, a set of circuits were proposed to generate reference voltages using bandgap reference current generators for respective voltage level detectors. Also, a VOWL regulator and a VNWL charge pump were proposed for a small-area and low-power design. The proposed VpwL regulator can provide a large driving current with a small area since it regulates an input voltage （VCI） from 2.5 to 3.3 V. The VmvL charge pump can be implemented as a high-efficiency circuit with a small area and low power since it can transfer pumped charges to VNWL node entirely. The DC-DC converter for 1 T SRAM were designed with 0.11 μm mixed signal process and operated well with satisfactory measurement results.

摘要：战国时期的青铜工艺代表作山字镜在学界名气大、地位高,但目前关于其设计特征及纹饰来源的研究很少。本文运用字体设计理论分析山字镜山字纹特征,从汉字纹样化层面对其进行研究,梳理山字镜山字纹历史发展脉络,用新的方式阐释所蕴含的含义,说明该物件对汉字装饰器物传统的重要影响。

摘要：A 512-bit EEPROM IP was designed by using just logic process based *** limit the voltages of the devices within 5.5 V,EEPROM core circuits,control gate(CG) and tunnel gate(TG) driving circuits,DC-DC converters:positive pumping voltage(VPP=4.75 V) ,negative pumping voltage(VNN=4.75 V) ,and VNNL(=VNN/2) generation circuit were *** addition,switching powers CG high voltage(CG_HV) ,CG low voltage(CG_LV) ,TG high voltage(TG_HV) ,TG low voltage(TG_LV) ,VNNL_CG and VNNL_TG switching circuit were supplied for the CG and TG driving ***,a sequential pumping scheme and a new ring oscillator with a dual oscillation period were *** reduce a power consumption of EEPROM in the write mode,the reference voltages VREF_VPP for VPP and VREE_VNN for VNN were used by dividing VDD(1.2 V) supply voltage supplied from the analog block in stead of removing the reference voltage generators.A voltage level detector using a capacitive divider as a low-power DC-DC converter design technique was *** result shows that the power dissipation is 0.34μW in the read mode,13.76μW in the program mode,and 13.66μW in the erase mode.

摘要：针对执行系统概念设计过程前期阶段的计算机辅助实现是一个难题的现状,将遗传算法引入执行系统概念设计的行为结构分组创新。将行为集合分解为相互矛盾的行为和相容行为,相互矛盾的行为数决定基因串各段规模,相容行为数决定基因串段数,构成行为结构的基因串编码方法。基于行为分组评价规则,定量化形成目标函数并构造适应度函数,通过设定的基因操作,实现行为分组的计算机优化,达到行为结构的变型创新。算例分析表明所提出方法的有效性,有助于实现执行系统的计算机辅助概念设计。

摘要：目的:设计合成新型去甲斑蝥素衍生物,并研究其体外抗肿瘤活性。方法:以呋喃和马来酸酐为起始原料经多步反应合成去甲斑蝥素衍生物,化合物经1HNMR、ESI-MS和元素分析确证结构;用MTT法,首先对所有化合物进行抗乳腺癌细胞株4T1体外活性筛选,然后对活性较好的化合物7a和7c进一步作抗肺癌细胞株LLC和抗肝癌细胞株SK-HEP-1的活性检测,同时对这2种化合物进行对正常血管内皮细胞ABAE的损伤试验。结果:设计合成了18种新化合物。其中化合物7a和7c对肿瘤细胞株有一定的抑制作用,而对正常细胞的损伤程度较低。结论:化合物7a和7c对乳腺癌细胞株4T1、肺癌细胞株LLC和肝癌细胞株SK-HEP-1有一定的抑制作用,尤其是化合物7c对正常内皮细胞ABAE的损伤比对照药去甲斑蝥素小得多,有进一步研究的价值。

摘要：The use of design method considering a coil temperature to maximize the thrust density of a double side coreless permanent magnet linear synchronous motor(PMLSM) was *** optimal current density where the coil temperature reaches an allowable temperature with heat analysis was applied to a magnetic circuit *** optimal current density is verified whenever the design parameters of the motor are *** design parameters of the motor were applied to thrust *** this way,the optimal model,which is a reversal of the existing design method,is *** results were compared with the experimental data to verify their *** the convection heat transfer coefficient is applied to other models,the results of the analysis and test values show good *** method proposed has some limitations.

摘要：Osteoconductive function is remarkably low in bone disease in the absence of bone tissue surrounding the grafting site,or if the bone tissue is in poor ***,an effective bone graft in terms of both osteoconductivity and osteoinductivity is required for clinical ***,the three-dimensional(3D)kagome structure has been shown to be advantageous for bone tissue regeneration due to its mechanical *** this study,a polycaprolactone(PCL)kagome-structure scaffold containing a hyaluronic acid(HA)-based hydrogel was fabricated using a 3D printing *** retention capacity of the hydrogel in the scaffold was assessed in vivo with a rat calvaria subcutaneous model for 3 weeks,and the results were compared with those obtained with conventional 3D-printed PCL grid-structure scaffolds containing HA-based hydrogel and bulk-type HA-based *** retained hydrogel in the kagome-structure scaffold was further evaluated by in vivo imaging system *** further reinforce the osteoinductivity of the kagome-structure scaffold,a PCL kagome-structure scaffold with bone morphogenetic protein-2(BMP-2)containing HA hydrogel was fabricated and implanted in a calvarial defect model of rabbits for 16 *** bone regeneration characteristics were evaluated with hematoxylin and eosin(H&E),Masson’s trichrome staining,and micro-CT image analysis.