摘要：Extensive numerical investigations of the performance and flow structure in an unshrouded tandem-bladed centrifugal compressor are presented in comparison to a conventional *** characteristics are explored for various tip clearance levels,axial spacings and circumferential *** impeller was modified to tandem-bladed design with no modifications in backsweep angle,meridional gas passage and camber distributions in order to have a true comparison with conventional *** degradation is observed for both the conventional and tandem designs with increase in tip ***-equation models for correlating stage characteristics with tip clearance are *** two designs,it is clearly evident that the conventional design shows better performance at moderate flow ***;near choke flow,tandem design gives better results primarily because of the increase in throat *** point flow rate also seems to drop for tandem compressor resulting in increased range of operation.

摘要：为了探索高效的第四系覆盖及露头较少区域的基岩智能填图方法,应用图卷积网络(GCN)对青海省察汗乌苏河地区水系沉积物地球化学采样的下伏基岩进行分类。基于Delaunay三角化采样点被组织为一个地形加权的有向图来表达水系沉积物地球化学采样点之间的河流上下游关系。实验结果表明:半监督的GCN模型仅使用了20%的采样点标签,分类精度达到68.20%(10类基岩)和78.31%(5类基岩)。该方法能有效利用水系沉积物地球化学采样中的元素含量进行基岩填图,且能提高基岩填图的效率并能进行大面积应用。

摘要：This study considered the design of an efficient, high brightness polar InGaN/GaN light emitting diode （LED） structure with A1GaN capping layer for green light emission. The deposition of high In （〉 15%） composition within InGaN quantum well （QW） has limitations when providing intense green light. To design an effective model for a highly efficient InGaN green LEDs, this study considered the compositions of indium and aluminum for InxGal xN QW and AlyGal yN cap layers, along with different layer thicknesses of well, barrier and cap. These structural properties significantly affect different properties. For example, these properties affect electric fields of layers, polarization, overall elastic stress energy and lattice parameter of the structure, emission wavelength, and intensity of the emitted light. Three models with different composition and layer thicknesses are simulated and analyzed to obtain green light with in-plane equilibrium lattice parameter close to GaN （3.189 A ） with the highest oscillator strength values. A structure model is obtained with an oscillator strength value of 1.18 × 10-1 and least in-plane equilibrium lattice constant of 3.218 A. This emitter can emit at a wavelength of 540 nm, which is the expected design for the fabrication of highly efficient, bright green LEDs.

摘要：Saudi Arabia is rich not only in its oil, but also in its cultural heritages. With 1,500 rock arts and 4,000 archaeological sites it is the fourth largest rock art region in the world. The entire Saudi Arabia has been comprehensively surveyed, investigated, and documented under the auspices of the Saudi Arabian Department of Antiquities （now Saudi Commission for Tourism and Antiquities）. The archaeological and rock art investigations revealed tantalizing results providing the evidence of human presence in the Arabian Peninsula from the early Acheulean period until the present day. In addition to the ancient towns and cities like Madain Saleh （contemporary to Petra in Jordan）, Tayma, Domat al-Jandal, Thaj, and al-Fao and Ukhdoud hundreds of strange, mysterious, and mystic structures and petrolyghs are located in the deserts of Arabia. A few of such sites are discussed in this paper, highlighting the strong but still unknown to the world the cultural heritage of Saudi Arabia.

摘要：传统无线局域网组网方式存在通信距离近、功耗高等问题,不能满足大型超市电子价签系统的通信要求。为此,提出一种基于LoRa(Long Range)通信技术的电子价签系统设计方案。采用具备LoRa调制方式的SX1278芯片作为系统LoRa模块的主芯片,以STM32单片机作为网关和节点价签的主控MCU,采用星型拓扑结构组网,并通过对通信过程中信噪比和接收信号强度两个参数值进行融合计算来分析信道状态,以此实现对数据传输速率的自适应调整。经实验测试,该系统通过服务器可经LoRa无线网络稳定传输数据,最终对电子价签显示内容进行更改,并有效提高了通信距离和降低功耗,可满足大型超市的实际需求。

摘要：利用室内人工模拟降雨试验,研究了4种设计雨强（33,54,94,125mm/h）、3种设计坡度（5°,10°,25°）在覆盖条件下对紫色土坡面初始产流时间、覆盖保水率和保沙率的影响。结果表明：覆盖条件下初始产流时间相比裸地均有一定的滞后效果,且其初始产流的滞后时间随坡度、雨强的增加而减少。当坡度增大至25°,雨强在94mm/h以上时,其滞后时间逐渐趋于稳定,在1.61~2.84min范围内波动。雨强是影响秸秆覆盖保持水土作用的重要因子,与覆盖保水率、保沙率均在0.01水平上呈显著负相关,且在不同坡度条件下均可以用抛物线进行很好的描述。不同坡度条件下,覆盖的保水率随雨强的增加逐渐下降至14.5%,而其保沙率则只下降至92.25%,相比覆盖的保水作用,其保沙作用更加明显。覆盖条件下,坡度对坡面产流及产沙的贡献率均大于50%,坡度对秸秆覆盖保持水土的作用影响很大。坡度对坡面侵蚀的贡献率在裸地和覆盖条件下均随雨强的增加而呈现减小的趋势,且在相同雨强下,坡度的贡献率在覆盖条件下均大于裸地,在大雨强下（94mm/h和125mm/h）差异明显。

摘要：大量的研究行为识别方法集中在检测简单的动作,如:步行,慢跑或者跳跃等;针对于打斗或者动作复杂的攻击性行为则研究较少;而这些研究在某些监控场景下非常有用,如:监狱,自助银行,商场等.传统的暴力行为识别研究方法主要利用先验知识来手动设计特征,而本文提出了一种基于3D-CNN结构的暴力检测方法,通过三维深度神经网络直接对输入进行操作,能够很好的提取暴力行为的时空特征信息,从而进行检测.从实验结果可以看出,本文方法能较好地识别出暴力行为,准确率要高于人工设计特征的方法.

摘要：【目的】本研究旨在探讨大田轻简化栽培条件下棉花氮代谢随播期和密度的变化规律。【方法】选用华棉3109(*** L.)于2014年在华中农业大学试验农场,采用裂区设计:播期为主区(S1,5月30日;S2,6月14日),密度为副区(D1,7.5株·m-2;D2,9.0株·m-2;D3,10.5株·m-2),研究了硝酸还原酶(Nitrate reductase,NR)活性在主茎叶位和根系的分布特点。【结果】1)不同播期和密度对叶片和根系NR活性平均值有显著影响。推迟播期对现蕾期棉花叶片与根系平均NR活性无显著影响,增加密度可降低叶片平均NR活性,但对根系平均NR活性无显著影响;推迟播期,显著降低初花期和盛花期棉花叶片NR活性平均值,但晚播对根系NR活性平均值的影响由侧根NR决定,增加密度,叶片和根系平均NR活性呈先升高后降低变化趋势,表明见花施肥后,晚播抑制了棉花地上部叶片氮代谢强度,而增强了地下部根系氮代谢强度;适度增加密度可显著增强棉花地上部叶片和地下部根系氮代谢强度。2)现蕾期叶片NR活性平均值>初花期>盛花期,根系NR活性平均值大体呈先升高后降低变化趋势。3)主茎叶位NR活性在3个时期均由上而下显著降低,以第1叶至第3叶波动较大,第4叶以下叶片间无显著差异,表明叶片NR活性与叶龄有关,幼叶氮代谢强度高于成熟叶片,成熟叶片之间氮代谢强度保持相对稳定。【结论】长江流域棉区(主要指湖北植棉区)棉花播种不应晚于6月14日,种植密度以9.0株·m-2最佳。

摘要：悬架是用来支持车身的系统,通过隔离道路干扰使得乘客感觉舒适、并确保车辆稳定.为此研究了全车模型悬架系统在下列几种控制方式下的性能:被动控制、半主动控制、自适应标准可加性模型(SAM)下的主动控制.全车模型可以为车辆悬架系统提供一些必要的性能参数,如车身偏移、车轮偏移和悬架偏斜.乘坐的舒适性和车辆的操控性决定了所需悬架系统的性能.乘坐的舒适性取决于车身偏移和乘客座位的偏移,而车辆的稳定由其他自由度(如俯仰和滚转)决定.半主动和主动悬架控制的设计通过MATLAB/SIMULINK加以实现,充分考虑了不规则的路面,并以此验证半主动控制和SAM主动控制的性能.实验结果表明,SAM主动控制能够改善乘坐的舒适性和车辆的操控性.

摘要：This work is about the development of a super low noise amplifier with minimum power consumption and high gain for several wireless *** amplifier operates at frequency bands of 0.9-2.4 GHz and can be used in many applications like Wireless local area network(WLAN),WiFi,Bluetooth,ZigBee and Global System for mobile communications(GSM).This new design can be employed for the IEEE 802.15.4 standard in industrial,scientific and medical(ISM) *** enhancement mode pseudomorphic high electron mobility transistor PHEMT is used here due to its high linearity,better performance and less noisy *** common source inductive degeneration method is employed here to enhance the gain of *** amplifier produces a gain of more than 17 dB and noise figure of about 0.5 *** lower values of S11 and S22 reflect the accuracy of impedance matching network placed at the input and output sides of *** Advance Design System(ADS) is used for the design and simulation *** the layout of design is developed on the FR4 substrate.