摘要：采用体式显微镜、优化设计软件研究了ENiCrMo3T0-4药芯焊丝中药芯组成及工艺参数对气孔敏感性的影响。结果表明:随着焊丝药芯组成中SiO_2/ZrO_2、TiO_2/ZrO_2、(TiO_2+ZrO_2+SiO_2)/MnO的减小,气孔敏感性降低;气体流量的改变对焊缝表面针眼气孔数的影响不大,但气体流量过小会产生条虫状气孔;当焊接电压25 V、焊接电流160 A、干伸长量20 mm时,焊缝金属针眼气孔数最少,焊丝气孔敏感性最低;增大固液相温度区间及氢在高温熔渣中的溶解度,可以降低焊缝金属气孔敏感性。

摘要：690 MPa级以上高强钢的发展和工程应用受限于缺乏与其强韧性相匹配的焊接材料,其根本原因是以针状铁素体为主的690 MPa级以下高强钢熔敷金属的强韧化理论已经不能指导新一代高强钢焊接熔敷金属的设计。因此,解决该问题的关键是寻求最佳的熔敷金属微观组织结构。综述了690 MPa级以上高强钢焊接熔敷金属中出现的联合贝氏体和其它各类微观组织对其强韧性的影响。其中,由不同形貌贝氏体相和针状铁素体相组成的复相分割结构可使焊接熔敷金属实现良好的强韧性匹配;然而,联合贝氏体作为下贝氏体的一种,其大尺寸的特点会显著降低高强钢焊接熔敷金属的强韧性;此外,可以通过物理冶金改善高强钢焊接熔敷金属的性能。

摘要：铁素体含量对不锈钢焊缝的耐蚀、韧性、强度等性能有重要影响,准确测量或预测十分重要.铁素体含量的测试与预测方法有很多种,最常使用的是图谱法和磁测法,介绍这两种方法的最新进展.在不同实验室制备及测量试样、试样表面是否进行处理等都会影响测试与预测结果的精度.铁素体数（Ferrite number,FN）小于5时,不同实验室之间图谱法预测结果的波动是平均值的±60％,铁素体数在15～35时,图谱法预测结果的波动是平均值的±30％.磁测法测量的波动是平均值的±20％,小于图谱预测法,是目前较精确的测试方法.新的预测方法考虑了元素之间相互作用和冷却速度等因素对铁素体含量的影响,提高了预测的精度.针对铁素体数测试结果不可避免的波动问题,提出目标范围这一概念来解决焊材设计者与使用者对测试结果产生的分歧.

摘要：Type 1 diabetes is caused by insulin deficiency due to the loss of beta cells in the islets of *** severe cases,islet transplantation into the portal vein is ***,due to the loss of transplanted islets and the failure of islet function,the 5-year insulin independence rate of these patients is<50%.In this study,we developed a long-term,insulin-secreting,3 Dbioprinted construct implanted subcutaneously with the aim of preventing islet *** bioprinted construct was fabricated by the multi-layer bioprinting of beta-cell(mouse insulinoma-6:MIN-6)-encapsulated alginate bioink and poly(caprolactone)biodegradable polymer.A glucose response assay revealed that the bioprinted constructs proliferated and released insulin normally during the 4-week in vitro *** MIN-6 generated clusters with a diameter of 100-200μm,similar to the original pancreatic islets in the *** an in vivo study using type 1 diabetes mice,animals implanted with bioprinted constructs showed three times higher insulin secretion and controlled glucose levels at 8 weeks after *** the implanted,bioprinted constructs had a positive effect on insulin secretion in the experimental animals,the survival rate of the implanted group(75%)was three times higher than that of the non-implanted group(25%).The results suggest that the proposed,3 D-bioprinted,subcutaneous construct can be a better alternative to portal vein islet transplantation.

摘要：The long-term adjustment processes of atmosphere and ocean in response to gradually increased atmospheric CO2 concentration have been analyzed in 70 and 140 a integrations with NCAR fully-coupled climate system model (CSM). In these experiments the CO2 concentration has been increased to double and quadruples the initial concentration, respectively. After 70 a, at the time of CO2 doubling, the model predicts surface air temperature rises by 1.2 and 1.5 K for the globe and the northwestern Pacific Ocean, respectively. The behavior of the quadrupling run is similar: each global and regional mean surface air temperatures increase by 2.8 and 3.0 K at the time of CO2 quadrupling. From the experiments, surface air temperature changes in the northwestern Pacific Ocean will be more distinctive compared with the global average, mainly due to exceptionally large wanning and sea level change near the entrance of the Kuroshio extension.

摘要：Three-dimensional （3D） printing is a novel process used to manufacture bone tissue engineered scaffolds. This process allows for easy control of the architecture at the micro structure. However, the scaffold properties are typically limited in terms of cellular activity at the scaffold surface due to the printed materials properties. In this study, we developed a polycaprolactone （PCL） blended with polyethylene glycol （PEG） 3D printed scaffold using a rapid prototyping system. The manufactured scaffolds were then washed out to form small pores on the surface in order to improve the scaffolds hydrophilicity. We analyzed the resultant material by using Scanning Electron Microscopy （SEM）, water absorption, water contact angle, in vitro WST-1, and the Bradford assay. Additionally, cells incubated on the fabricated scaffolds were visualized by Confocal Laser Scanning Microscopy （CLSM）. The developed scaffolds exhibited small pores on the strand surface which served to increase hydrophilicity as well as improve cellular proliferation and increase total protein content. Our findings suggest that the presence of small pores on the scaffolds can be used as an effective tool for improving implant cellular interaction. This research indicates that these modified scaffolds can be considered useful for bone tissue engineering applications to improve human health.

摘要：Flow characteristics inside a cyclone filter were investigated by the use of computational fluid dynamics(CFD). For computations, SST model was adopted. Parametric study was carried out considering the filtering performance. Revolution speeds were changed from 100 to 550 with 50 increments. A skirt is the driving source for cyclone operation. The influence of several design factors, such as the skirt length, the skirt gap and the return length to filtering performance was investigated under the particle diameter 100μm of debris material(Al, s.g.=2.7). The filtering performance was also investigated with the skirt length 28 mm changing the debris diameters from 1μm to 50μm. The flow rate of the working fluid was maintained at 0.55kg/s. It has been verified that the most influential factors to the filtering efficiencies was the skirt gap between the cyclone generator and the cyclone vessel.

摘要：Ultra-high performance concrete (UHPC) is featured by a compressive strength 5 times higher than that of ordinary concrete and by a high durability owing to the control of the chloride penetration speed by its dense structure. The high strength characteristics of UHPC offer numerous advantages like the reduction of the quantities of cables and foundations by the design of a lightweight superstructure in the case of the long-span bridge preserving its structural performance through axial forces and structures governed by compression. This study conducted the conceptual design of a hybrid cable-stayed bridge with central span of 1000 m and exploiting 200 MPa-class UHPC. The economic efficiency of the conceptual design results of the hybrid cable-stayed bridge with central span of 1000 m and of Sutong Bridge, the longest cable-stayed bridge in the world, was analyzed.

摘要：A DC-DC converter for flash memory IPs performing erasing by the FN (Fowler-Nordheim) tunneling and programming by the CHEI (channel hot electron injection) is designed in this paper. For the DC-DC converter for flash memory IPs using a dual voltage of VDD (=1.5V±0.15V)/VRD (=3.1V±0.1V), a scheme of using VRD (Read Voltage) instead of VDD is proposed to reduce the pumping stages and pumping capacitances of its charge pump circuit. VRD (=3.1V±0.1V) is a regulated voltage by a voltage regulator with an external voltage of 5V, which is used as the WL activation voltage in the read mode and an input voltage of the charge pump. The designed DC-DC converter outputs positive voltages of VP6V (=6V), VP8V (=8V) and VP9V(=9V);and a negative voltage of? VM8V (=-8V) in the write mode.