摘要：Abrasive flow machining(AFM) is an effective method that can remove the recasting layer produced by wire electrical discharge machining(WEDM). However, the surface roughness will not be easily uniform when a complex hole is polished by this method. CFD numerical method is aided to design good passageways to find the smooth roughness on the complex hole in AFM. Through the present method, it reveals that the shear forces in the polishing process and the flow properties of the medium in AFM play the roles in controlling the roughness on the entire surface. A power law model was firstly set up by utilizing the effect of shear rates on the medium viscosities, and the coefficients of the power law would be found by solving the algebraic equation from the relations between the shear rates and viscosities. Then the velocities, strain rates and shear forces of the medium acting on the surface would be obtained in the constant pressure by CFD software. Finally, the optimal mold core put into the complex hole could be designed after these simulations. The results show that the shear forces and strain rates change sharply on the entire surface if no mold core is inserted into the complex hole, whereas they hardly make any difference when the core shape is similar to the complex hole. Three experimental types of mold core were used. The results demonstrate that the similar shape of the mold core inserted into the hole could find the uniform roughness on the surface.

摘要：台湾有将近80%的人口居住于城市地区,使得供水系统负荷增加、脆弱度提升,而城市化也导致径流量增加使得洪灾风险提高。拟整合供水、灾备用水和雨洪消减,并对雨洪滞蓄系统进行雨洪利用策略及容量分析研究。以台湾新北市秀峰国小为基地,规划雨水储留供水系统、渗透侧沟系统、生态池系统串联的雨洪滞蓄系统,建立多目标替代方案进行分析评估。采用绿色建筑设计方法结合合理化公式进行降雨径流演算。结果表明,在各替代方案下,系统需设置容量55～185 m3,径流量削减率为26.5%～100%、洪峰削减率为15%～100%、供水率为5%～7.5%、灾备用水天数则从3 d提升至19 d。所提出的规划方法可以较小的设置容量达到雨洪滞蓄多目标利用效果。

摘要：针对雨水滞蓄设施在城区减洪之设置方式及容量计算,以就地消减雨洪(On-site Control)及分散配置原则提出设置规划流程与容量计算方式。对于雨水滞蓄措施之减洪机制进行水文分析,并选择台湾台北县汐止地区为算例进行规划。与目前以减少开发增加洪峰量为目的之滞洪设施规划方式相比,本研究提出之规划方式可同时减少开发增加径流峰值与体积,且所需设计容量较少。