摘要：Chinese bayberry （Myrica rubra Sieb. et Zucc.） is one of the important subtropical fruit crops native to the South of China and Asian countries. In this study, 107 novel simple sequence repeat （SSR） molecular markers, a powerful tool for genetic diversity studies, cultivar identification, and linkage map construction, were developed and characterized from whole genome shotgun sequences. M13 tailing for forward primers was applied as a simple method in different situations. In total, 828 alleles across 45 accessions were detected, with an average of 8 alleles per locus. The number of effective alleles ranged from 1.22 to 10.41 with an average of 4.08. The polymorphic information content （PIC） varied from 0.13 to 0.89, with an average of 0.63. Moreover, these markers could also be amplified in their related species Myrica cerifera （syn. More/la cerifera） and Myrica adenophora. Seventy-eight SSR markers can be used to produce a genetic map of a cross between ＇Biqi＇ and ＇Dongkui＇. A neighbor-joining （N J） tree was con- structed to assess the genetic relationships among accessions, and the elite accessions ＇Y2010-70＇, ＇Y2012-140＇, and ＇Y2012-145＇, were characterized as potential new genotypes for cultivation.

摘要：结合月球轨道交会对接任务的特殊性和中国探月工程的实际工程约束,介绍了嫦娥五号任务月球轨道交会对接远程导引轨道设计,包括轨道器调相和上升器远程导引两方面内容,重点介绍了月球轨道交会对接远程导引多脉冲调相轨道方案的选择、标称轨道优化设计、轨控策略和误差分析结果以及实际飞行轨道控制的情况。飞行实践数据分析表明:嫦娥五号任务月球轨道交会对接远程导引轨道设计是正确合理的,实际飞行的速度增量满足推进剂预算的要求,全飞行过程测控条件良好,交班点控制精度完全满足转自主控制的要求,有力保障了交会对接和样品转移的顺利完成。

摘要：基于电谐振原理和镜像原理设计了一种周期性接地边耦合SRRs(split ring resonators)结构的新型电谐振人工异向介质,进而将该人工异向介质应用于抑制微带阵列天线元间的互耦.与传统微带阵列天线中的用于抑制互耦的电磁结构相比,该人工电磁结构不仅体积小(厚度仅为0·005λ0),而且能获得优异的阵列单元间互耦抑制性能(抑制度达16·8dB).该研究成果表明人工异向介质在高密度高性能微带天线阵列设计中具有良好的应用潜能.

摘要：A new linac injector CSR-LINAC for the Cooler Storage Ring of the Heavy Ion Research Facility in Lanzhou(HIRFL-CSR) is proposed to improve the performance of the HIRFL. As a key component of the CSRLINAC, the 108.48-MHz radio frequency quadrupole(RFQ) is under design at the Institute of Modern *** ions with mass-to-charge ratios of 3–7 will be accelerated from 4 to 300 keV/u by the RFQ. In the beam dynamics design, the New Four-Section Procedure is adopted to improve the transmission efficiency and obtain a compact structure. In this paper, a transmission efficiency of 98.0% in the 3.07-m-long cavity was obtained. The Interdigital H-type structure is employed because of its mechanical stability and high shunt impedance. The RF performance of the cavity is investigated by the electromagnetic simulation. The optimized results of the electric field to meet the beam dynamics requirements are presented in this paper.

摘要：针对蓝宝石微波腔的设计问题,通过理论分析推导出计算蓝宝石微波腔参数的公式。利用计算机编程,分析了TE011模式下的谐振频率,以及Q值随腔尺寸、填充介质(蓝宝石)厚度的变化关系并画出曲线,得到了设计优化微波谐振腔的依据。根据得到的依据设计了一种新腔型并利用软件进行优化仿真,新微波腔的无载Q值为67 603,腔外径为160 mm,Q×η为37 857.7,腔频率温度系数为-64.9 kHz/K。与前微波腔相比,具有很大的提高。

摘要：远程教学是建立在信息技术基础上的一种新型教学方式。尽管远程教学能够对网络中的资源分配保持合理性,但是,多媒体通信应该达到完全的QoS。对远程教学中实时媒体的信息传输进行了研究,提出了一个基于窗口数据报拥塞控制协议的方案。实验结果表明,校正基于估计平均往返时间的运行时拥塞控制算法是可行的。

摘要：概述了目前计算机辅助变型设计中存在的问题，将实例推理技术（ＣＢＲ）应用于变型设计，提出了一个支持概念建模和装配建模的智能变型设计系统框架，研究了这种智能变型设计的设计过程理论，并对系统的关键技术——实例的表示模型作了详细的研究．

摘要：设计了电力线串口服务器,它具有电力线通信、可配置IP地址和RS-232 UDP协议转换功能等特点。换言之,不用再投资更新设备,使用电力线串口服务器便能将现有终端串口设备连接上电力线局域网。

摘要：基于传统信道化接收机以硬件划分信道为主,无法实时处理大量的宽带信号,提出了软件结合硬件来实现宽带信号中子信道的划分;采用多相滤波算法实现信道化,介绍了软件信道化接收机实现的硬件平台,对该接收机硬件设计中每个电路模块的功能及实现分别作了说明,并从整体上描述了软件的信道化接收机的工作流程。

摘要：为了Java三维图形程序能在不同的移动设备和平台上运行,JCP(Java Community Process)制定了J2ME M3G(Mobile 3D Graphics API),规范了移动设备上Java三维图形程序的API和框架。而M3G中由于动画部分的独特性以及它在设计和实现中的复杂性,我们结合在XORP上开发M3G类库经验的基础,总结并给出了其设计和实现的参考模型和理论基础,也适用于其它3D类库的设计和开发。