摘要：A two-dimensional panel in subsonic flow with stochastic excitation is studied by assuming that the aerodynamic pressure contains random pressure *** on the global properties,the sensitivities of system parameters and noise intensities are ***,the parameter region with multiple coexisting attractors under different dynamic pressures is *** is found that the coexistence of multiple attractors extensively appears and the basin structure may be *** the periodic time history diagrams are calculated by simulating the random pressure fluctuation as Poisson white *** results show that under typical bistable conditions,the noise sensitivity of the subsonic panel system is related to the basin structures and the disposition of the coexisting attractors to the *** transition between two attractors diffuses along the unstable manifold and tends to the position where the basin boundary curvature is relatively *** findings underscore the importance of global analysis in assessing the noise load carrying capacity,which provides some valuable insights into the safety design of subsonic panel systems.

摘要：AlSi10Mg fabricated by selective laser melting(SLM)had a unique network-like silicon-rich structure,and the mechanism for its formation was explained by molecular dynamics(MD)*** effects of the silicon-rich phase and Mg-containing structure on corrosion were studied by first-principles *** to the simulations,corrosion resistant materials were designed,samples with laser powers of 150 W,200 W and 250 W were *** results indicated that a local thermal gradient during laser printing caused Si segregation,and the rapid cooling rate lead to a large number of subgrains,which assisted *** difference in potential caused galvanic corrosion,and a structure with low work function in the molten pool caused *** corrosion resistance of materials processed with a high laser power increased.

摘要：This paper focuses on the advanced Forward Error Correction(FEC) based on LowDensity Parity-Check(LDPC) codes for remote control and data transmission of Aeronautic and Astronautic Vehicles(AAV). It shows that the nontransparent LDPC codes with odd row weights are able to resist phase inversion with a small computational overhead. To the best of our knowledge, it is the first time to use FEC to resist phase inversion. Then, a high hardware-efficient FEC design for AAV, which is capable of correcting random errors as well as phase inversion, is proposed based on circulant decomposition with circulant size of 2s. Such a(4096, 2048) LDPC code has been adopted in a data transmission system due to its excellent error performance and hardware efficiency.

摘要：In this paper,a novel 2-DOF rotational pointing mechanism(RPM)is designed inspired by the guidelines of the graphical *** mechanism integrates with a fast steering mirror(FSM)for compensating pointing errors of a laser *** design intends to achieve an angular travel of±10 mrad and steers a 25 mm mirror aperture.A planar flexure with beam flexures accompanied in parallel with an axial flexure build-up mechanism *** mechanismbased RPM ensures high precision and *** characteristics are established based on the stiffness matrix method for four different planar flexure *** layout with best in-plane rotational compliance is then assessed for performance sensitivity to mechanism dimension parameters and parasitic error,thus informing the design *** stiffness in both the inplane rotational axes and stress is determined based on finite element analysis(FEA).The wire electrical discharge machining(EDM)is employed for developing the proof of concept for the RPM and is then assembled in *** are conducted to determine the rotational stiffness and angular travel about both in-plane rotational *** among theoretical,numerical and experiments reveal excellent linearity of rotational stiffness along the rotational travel *** maximum theoretical error is less than 5.5%compared with FEA while,the experimental error has a mean of 5%and 3%for both rotational axes thus satisfying the intended design requirement.

摘要：Elevated working temperatures reduce the efficiency of dye-sensitized solar cells （DSCs）, and effective temperature regulation protects them from the undesirable efficiency loss. In this work, a semi-transparent DSC module equipped with a cooling sys- tem was designed and constructed for application in buildings, the temperature and output performance of the modules with or without cooling treatment were investigated. The test results showed the cooling system could noticeably improve the power generation and reduce the module temperature. Moreover, we established a mathematical model to analyze the modules＇ ther- mal performances, and introduced the concept of cooling efficiency to evaluate the cooling effect. The model accuracy have been validated utilizing measured data, and the effects of channel depth and mass flow rate on the module temperature and cooling efficiency were further theoretically studied. The combined DSC module has been found to have a good application prospect in building integrated photovoltaic （BIPV）, and the numerical results are important in system design.

摘要：This paper presents an extended object model for case-based reasoning （CBR） in product configuration design. In the extended object model, a few methods of knowledge expression are adopted, such as constraints, rules, objects, etc. On the basis of extended object model, case representation model for CBR is applied to product configuration design system. The product configuration knowledge can be represented by the extended object. The model can support all the processes of CBR in product configuration design, such as case representation, indexing, retrieving, and case revising. The presented model is an extension of the traditional object-oriented model by including the relationship class used to express the relation between the cases, constraints class used in the product configuration knowledge representation, index class used in ease retrieving, and solution class used in case revising. Therefore, the product configuration knowledge used in the product configuration design can be represented by using this model. In the end, a metering pump product configuration design system is developed on the basis of the proposed product configuration model to support customized products.

摘要：In this paper, high density of dislocations, grain boundaries and nanometer-scale α precipitates were intro- duced to a metastable Ti-36Nb-5Zr alloy （wt%） through a thermo-mechanical approach including severe cold rolling and short-time annealing treatment. The martensitic trans- formation was retarded, and the β phase with low content of β stabilizers was retained at room temperature after the thermo-mechanical treatment. As a result, both low mod- ulus （57 GPa） and high strength （950 MPa） are obtained. The results indicate that it is a feasible strategy to control martensitic transformation start temperature through microstructure optimization instead of composition design, with the aim of fabricating low modulus β-type Ti alloy.

摘要：Developing transition metal-based electrocatalysts with rich active sites for water electrolysis plays important roles in renewable energy fields. So far, some strategies including designing nanostructures, incorporating conductive support or foreign elements have been adopted to develop efficient electrocat- alysts. Herein, we summarize recent progresses and propose in-situ electrochemical activation as a new pretreating technique for enhanced catalytic performances. The activation techniques mainly comprise facile electrochemical processes such as anodic oxidation, cathodic reduction, etching, lithium-assisted tuning and counter electrode electro-dissolution. During these electrochemicaI treatments, the catalyst surfaces are modified from bulk phase, which can tune local electronic structures, create more active spe- cies. enlarge surface area and thus improve the catalytic performances. Meanwhile, this technique can couple the atomic, electronic structures with electrocatalysis mechanisms for water splitting. Compared to traditional chemical treatment, the in-situ electrochemical activation techniques have superior advantages such as facile operation, mild environment, variable control, high efficiency and flex- ibility. This review may provide guidance for improving water electrolysis efficiencies and hold promis- ing for application in many other energy-conversion fields such as supercapacitors, fuel cells and batteries.

摘要：Phononic materials with specific band-gap characteristics at desired frequency ranges are in great demand for vibration and noise isolation, elastic wave filters, and acoustic devices. The attenuation coefficient curve depicts both the frequency range of band gap and the attenuation of elastic wave, where the frequency ranges corresponding to the none-zero attenuation coefficients are band gaps. Therefore, the band-gap characteristics can be achieved through maximizing the attenuation coefficient at the corresponding frequency or within the corresponding frequency range. Because the attenuation coefficient curve is not smooth in the frequency domain, the gradient-based optimization methods cannot be directly used in the design optimization of phononic band-gap materials to achieve the maximum attenuation within the desired frequency range. To overcome this difficulty, the objective of maximizing the attenuation coefficient is transformed into maximizing its Cosine, and in this way, the objective function is smoothed and becomes differentiable. Based on this objective function, a novel gradient-based optimization approach is proposed to open the band gap at a prescribed frequency range and to further maximize the attenuation efficiency of the elastic wave at a specific frequency or within a prescribed frequency range. Numerical results demonstrate the effectiveness of the proposed gradient-based optimization method for enhancing the wave attenuation properties.

摘要：Electrochemical machining (ECM) is an effective and economical manufacturing method for machining hard-to-cut metal materials that are often used in the aerospace field. Cathode design is very complicated in ECM and is a core problem influencing machining accuracy, especially for complex profiles such as compressor blades in aero engines. A new cathode design method based on iterative correction of predicted profile errors in blade ECM is proposed in this paper. A mathematical model is first built according to the ECM shaping law, and a simulation is then carried out using ANSYS software. A dynamic forming process is obtained and machining gap distributions at different stages are analyzed. Additionally, the simulation deviation between the prediction profile and model is improved by the new method through correcting the initial cathode profile. Furthermore, validation experiments are conducted using cathodes designed before and after the simulation correction. Machining accuracy for the optimal cathode is improved markedly compared with that for the initial cathode. The experimental results illustrate the suitability of the new method and that it can also be applied to other complex engine components such as diffusers. (C) 2016 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics.