摘要：The global demand for effective skin injury treatments has prompted the exploration of tissue engineering *** three-dimensional(3D)bioprinting has shown promise,challenges persist with respect to achieving timely and compatible solutions to treat diverse skin *** situ bioprinting has emerged as a key new technology,since it reduces risks during the implantation of printed scaffolds and demonstrates superior therapeutic ***,maintaining printing fidelity during in situ bioprinting remains a critical challenge,particularly with respect to model layering and path *** study proposes a novel optimization-based conformal path planning strategy for in situ bioprinting-based repair of complex skin *** strategy employs constrained optimization to identify optimal waypoints on a point cloud-approximated curved surface,thereby ensuring a high degree of similarity between predesigned planar and surface-mapped 3D ***,this method is applicable for skin wound treatments,since it generates 3D-equidistant zigzag curves along surface tangents and enables multi-layer conformal path planning to facilitate the treatment of volumetric ***,the proposed algorithm was found to be a feasible and effective treatment in a murine back injury model as well as in other complex models,thereby showcasing its potential to guide in situ bioprinting,enhance bioprinting fidelity,and facilitate improvement of clinical outcomes.

摘要：The advancement of a Z-scheme photoelectrochemical(PEC)system for hydrogen production and watersplitting holds significant promise in addressing the escalatingglobal energy *** this study,a ternary Co-ZnCdS-BiFeO_(3)Z-scheme composite photocatalyst was *** optimizingthe ratio of BiFeO_(3)/ZnCdS,the photocatalytic activity of thematerial is enhanced,while enhancing the electron transferefficiency and strengthening the stability of the *** Co(dmgBF2)_(2)(H_(2)O)_(2)was selected as the co-catalystto further improve the electron-hole separation efficiencyand photocorrosion *** visible light irradiation,the hydrogen production rate of the PEC system can reach4.03 mmol g^(-1)h^(-1).Under optimal conditions,applying a biasvoltage of−0.1 V *** can produce−38.5μA cm^(−2).Thephotocatalytic current density of is as high as 13 times that ofpure ZnCdS,greatly improving the hydrogen production efficiency and stability of the *** study offers anovel benchmark for the development of a high efficiency Zscheme photocatalyst designed for water splitting and provides new insights into intrinsic resistance through PEC analyses.

摘要：Untreated urea-rich wastewater exerts severeadverse impacts on both the environment and human health,prompting extensive attention towards the urea oxidationreaction (UOR) as a sustainable technology to generate cleanenergy in recent years. UOR has a thermodynamic advantageover oxygen evolution reaction (OER) (1.23 V vs reversiblehydrogen electrode, RHE) and only requires 0.37 V (vs RHE),which is considered as an effective alternative to H_(2) production by water electrolysis. However, the inevitable kineticslowness and complex adsorption/desorption during the processhinder its practical application. Most traditional catalystsutilized for the UOR are comprised of precious metals, resulting in limited economic viability. Inspired by natural ureases, Ni-based catalysts have emerged as promisingalternatives owing to their rich deposits, low cost, and theregulated d orbitals of transition metal Ni, demonstratingconsiderable potential for UOR. Currently, numerous studieshave explored Ni-based hydroxides, oxides, chalcogenides, andphosphides in alkaline solutions. In this review, we will explorethe UOR reaction mechanism and summarize the catalystdesign strategies of various Ni-based catalysts recently, especially Ni-MOF, which has been rarely discussed before. Then,the broad prospects of UOR in practical applications aresummarized. Finally, based on the design strategies and performance comparisons discussed above, the challenges andprospects facing the future development of Ni-based electrocatalysts for the UOR will be presented.

摘要：Lithium metal batteries (LMBs) using gelpolymer electrolytes with satisfactory theoretical capacity andlow cost hold great promise for high energy density storagesystems. However, the inherently unwanted polarizations anduncontrolled lithium dendrites resulting from inferior Li-iontransporting efficiency hinder the practical application ofconventional gel electrolytes. Herein, a highly conductivecomposite gel polymer electrolyte with effective Li-ion conducting channels is designed via swelling nanofibrous membrane, where the single-ion conducting polymer of lithiumsulfonate-based polyether (DEBS-Li) used as the Li-ion accelerator is combined with poly(vinylidene fluoride-hexafluoropropylene)P(VDF-HFP) matrix by the electrospinningtechnology. The DEBS-Li having rich sulfonic groups canpromote lithium salts dissociation via electrostatic interaction,thus expediting the ionic migration and enabling the as-developed gel electrolyte with high ionic conductivity (~1.58×10^(−3) S cm^(−1)) and lithium transference number (0.62) at 25℃.Such optimization of ionic transfer kinetics can highly delaythe nucleation time of lithium dendrite and significantly inhibit dendritic formation, which leads to a stable Li plating/stripping in the symmetrical battery over 250 h at1.5 mA cm^(−2). Benefiting from these advantages, the Li||LiFePO_(4)cell using the electrolyte realizes ultralong stable cyclingover 500 cycles at a high rate of 10 C with ~90% capacityretention. We believe this novel lithium sulfonate-basedpolyether gel polymer electrolyte has profound potential forpractical applications in high-performance LMBs.

摘要：It has made significant progress in catalyst andreactor design for commercial current densities in CO_(2) electroreduction(CO_(2)ER).However,these catalyst systems haverarely been applied for a C2 gas product of ethane due to itscommonly inferior selectivity relative to other C1 and ***,bamboo-like amorphous Ni(OH)_(2) nanotubes wrapped Cu nanoparticles composite(Cu NPs@aNi(OH)_(2)NTs)are constructed for selective CO_(2)ER to ethane ina flow *** unique structure of Cu NPs@a-Ni(OH)_(2) NTsprovides a confined geometry to improve the adsorption of thereactive *** interface of Cu NPs and a-Ni(OH)_(2) NTs isstabilized by generating some NiOH *** producedCu@NiOH interface enhances the activation of CO_(2) to*C*OOH and strengthens the adsorption of*COL on Cu sitefor more*COH formation and its dimerization for finalethane ***,amorphous Ni(OH)_(2) nanotubes promote water dissociation for the hydrogenation ofcarbonous intermediates,contributing to ethane *** synthesized Cu NPs@a-Ni(OH)_(2) NTs can reach a Faradaicefficiency of 48.3%and a partial current density of−226.7 mA cm^(−2) for ethane at−0.7 V in a flow cell,with aremarkable stability for 24 *** work provides a rationalstrategy to engineer Cu-based composite for selective CO_(2)ERto ethane in a flow cell.

摘要：Evapotranspiration(ET)is of great significance for the ecological environment and water resource utilization in arid and semi-arid *** Mongolian Plateau,owing to drought,low rainfall,and extremely uneven distribution of water resources,has a typical temperate continental climate.A refined understanding of the spatiotemporal distribution of ET in this region will help in establishing regulatory strategies for climate change responses,regional livestock regulation,and grassland degradation *** this study,meteorological station data,precipitation data,and the Penman-Monteith model were used to study the temporal and spatial distribution characteristics of actual ET over the Mongolian Plateau from 2011 to *** found that:(1)The spatial distribution of ET in the Mongolian Plateau showed a high trend in the north and east and a low trend in the middle and *** was a significant difference in the regional annual ET,with the highest ET reaching over 500 mm and the lowest being only approximately 70 mm.(2)The annual ET values in 2013,2018,and 2019 were relatively large,varying between 80 and 500 mm,and the overall ET of the Mongolian Plateau first decreased,then increased,and then decreased.(3)The temporal distribution exhibits a unimodal trend of increasing and then decreasing,with July being the turning ***-September was a period of high ET,with the highest ET exceeding 100 *** vegetation coverage was high,precipitation was abundant,and the vegetation ET effect was *** was a period of low ET,with a maximum ET of approximately 10 mm in January and December;the ET for the month with the lowest value was approximately *** quantitative inversion method proposed in this study can provide method and data support for north and central Asia,and other large arid and semi-arid areas.

摘要：Immune evasion behavior and immunosuppressive characteristics of tumor extensively impedethe immune initiation effect of therapy triggered immunogeniccell death (ICD). In this work, a carrier-adjuvantedimmunostimulator (designated as CoCeC) is developed toboost photodynamic immunotherapy by downregulatingprogrammed death ligand 1 (PD-L1) and impairing adenosinetriphosphate (ATP) hydrolysis. Among these, the crosslinkedchitosan oligosaccharide is applied as the drug carrier fordelivery of Ce6 and Ceritinib, which also serves as an immuneadjuvant to downregulate PD-L1. Meanwhile, the robustphotodynamic therapy (PDT) of CoCeC exhibits lethal toxicityagainst tumor cells to induce ICD and release damage-associated molecular patterns (DAMPs), which can also impairATP hydrolysis by blocking CD39. In vitro and in vivo resultsdemonstrate the robust therapeutic efficacy of CoCeC tosuppress primary tumor growth and activate a superior immune elimination against lung metastasis by amplifying theimmune initiation of ICD with the assistance of immune *** work provides a self-adjuvanted strategy to enhance the immune response of therapy induced ICD, which ispromising to activate systemic antitumor immunity in consideration of the complicated immunosuppressive factors.

摘要：Electrochemical reduction from nitrate into ammonia is a chance for nitrate removal from drinking water,while at higher concentrations,this 8-electron reduction process could even become relevant for energy storage,high conversions and low onset potentials ***,we report the synthesis and analysis of a NiFe_(2)O_(4)/C-MS hybrid system made by a molten-salt strategy where the Ni-Fe oxide spinel nanoparticles act as the active center for electrochemical nitrate(NO_(3)−)reduction reaction,while the microporous carbon serves as a conductive support to form a cohesive electrode *** NiFe_(2)O_(4)/C-MS catalyst achieves a maximum NH3 yield rate of 5.4 mg mgcat.^(−1)h^(−1)and Faradaic efficiency of 98%at−0.6 V versus reversible hydrogen *** NiFe_(2)O_(4)nanoparticles buried into microporous carbon,the onset potential decreases *** propose that this reduction originates from charge redistribution in NiFe_(2)O_(4)in the electronic heterojunction with carbon,while enhanced electrolyte diffusion in microporous carbon facilitates high conversion *** functional theory calculations clarify the low energy barrier on NiFe_(2)O_(4),highlighting the essential role of Ni in activating Fe *** COMSOL Multiphysics simulations demonstrate that the microporous curled carbon accelerates NO_(3)−transport and enhances adsorption on the reactive *** work offers insights for designing carbon-based nanocomposites for efficient nitrate reduction electrocatalysis.

摘要：A screw drive in-pipe robot is promising inspection equipment for small pipes. However, most of the existing screw drive in-pipe robots have problems of motion interference and slipping inside curved or irregular pipes. These problems result from the coupled relations among the steering motion, the motion speed and the load ability of the robot. In order to deal with the problems, the axiomatic design （AD） theory is applied to evaluate and analyze the existing designs. Then an uncoupled con- cept design based on the AD theory is proposed and the complete AD decomposition process is presented. After that, the pro- posed robot based on a tri-axial differential angle modulation mechanism is designed to realize the uncoupled concept. Finally, the uncoupled property is verified in a dynamics simulation system. The simulation results indicate that the mc tion speed, load ability and steering motion of the proposed robot can be adjusted individually compared with the robots taat have inclin- ing-angle-fixed rollers. Owing to the uncoupled design, the proposed robot can mechanically adapt to straight pipes and curved pipes with less roller slipping.

摘要：The high-current superconducting proton linac is being studied for the accelerator-driven system （ADS） project undertaken by the Chinese Academy of sciences. The injector II will be operated at 162.5 MHz, and the proton out from the RFQ with an energy of 2.5 MeV will .be accelerated to 10 MeV by two cryo-modules, which are composed of eight superconducting half wave resonance cavities and nine solenoids. In this paper, the design and beam simulation of the superconducting section of the injector Ⅱ, the acceptance calculation and a stability analysis are presented.