摘要：The effect of W element on the microstructure evolution and mechanical properties of Al_(1.25)CoCrFeNi3 eutectic high-entropy alloy and Al_(1.25)CoCrFeNi_(3-x)W_(x)(x=0,0.05,0.1,0.3,and 0.5;atomic ratio)high-entropy alloys(HEAs)were *** show that the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs are composed of face-centered cubic and body-centered cubic(BCC)*** W content increases,the microstructure changes from eutectic to *** addition of W lowers the nucleation barrier of the BCC phase,decreases the valence electron concentration of the HEAs,and replaces Al in the BCC phase,thus facilitating the nucleation of the BCC *** results show that the addition of W greatly improves the mechanical properties,and solid-solution,heterogeneous-interface,and second-phase strengthening are the main strengthening *** yield strength,tensile strength,and elongation of the Al_(1.25)CoCrFeNi2.95W0.05 HEA are 601.44 MPa,1132.26 MPa,and 15.94%,respectively,realizing a balance between strength and *** fracture mode of the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs is ductile–brittle mixed fracture,and the crack propagates and initiates in the BCC *** eutectic lamellar structure impedes crack propagation and maintains plasticity.

摘要：基于多边市场和博弈论理论,针对内容平台建立了免费、收费和现金补贴3种定价策略模型,并通过对各定价策略下的参数进行比较,确定平台最优定价策略.结果表明:广告干扰成本和广告边际收益影响平台定价策略的选择和现金补贴额度的设置,当两者处于特定阈值范围内时采用现金补贴策略,当广告干扰成本非常高时采用收费策略,其他情况下采用免费策略;现金补贴策略下,现金补贴额度与广告干扰成本负相关,与广告边际收益正相关;相同条件下,采用现金补贴策略比其他2种定价策略对各方利益主体和社会福利更好;现金补贴策略和免费策略下的一些参数受广告边际收益的影响趋势相反.

摘要：The A_(2)B_(2)O_(7)-type rare earth zirconate compounds have been considered as promising candidates for thermal barrier coating(TBC) materials because of their low sintering rate,improved phase stability,and reduced thermal conductivity in contrast with the currently used yttria-partially stabilized zirconia (YSZ) in high operating temperature *** review summarizes the recent progress on rare earth zirconates for TBCs that insulate high-temperature gas from hot-section components in gas *** on the first principles,molecular dynamics,and new data-driven calculation approaches,doping and high-entropy strategies have now been adopted in advanced TBC materials *** this paper,the solid-state heat transfer mechanism of TBCs is explained from two aspects,including heat conduction over the full operating temperature range and thermal radiation at medium and high *** paper also provides new insights into design considerations of adaptive TBC materials,and the challenges and potential breakthroughs are further highlighted for extreme environmental *** for improving thermophysical performance are proposed in two approaches:defect engineering and material compositing.

摘要：Modeling of unsteady aerodynamic loads at high angles of attack using a small amount of experimental or simulation data to construct predictive models for unknown states can greatly improve the efficiency of aircraft unsteady aerodynamic design and flight dynamics *** this paper,aiming at the problems of poor generalization of traditional aerodynamic models and intelligent models,an intelligent aerodynamic modeling method based on gated neural units is *** time memory characteristics of the gated neural unit is fully utilized,thus the nonlinear flow field characterization ability of the learning and training process is enhanced,and the generalization ability of the whole prediction model is *** prediction and verification of the model are carried out under the maneuvering flight condition of NACA0015 *** results show that the model has good *** the interpolation prediction,the maximum prediction error of the lift and drag coefficients and the moment coefficient does not exceed 10%,which can basically represent the variation characteristics of the entire flow *** the construction of extrapolation models,the training model based on the strong nonlinear data has good accuracy for weak nonlinear ***,the error is larger,even exceeding 20%,which indicates that the extrapolation and generalization capabilities need to be further optimized by integrating physical *** with the conventional state space equation model,the proposed method can improve the extrapolation accuracy and efficiency by 78%and 60%,respectively,which demonstrates the applied potential of this method in aerodynamic modeling.

摘要：Shearing dislocation is a common failure type for rock–backfill interfaces because of backfill sedimentation and rock strata movement in backfill mining *** paper designed a test method for rock–backfill shearing *** digital image techno-logy and three-dimensional(3D)laser morphology scanning techniques,a set of 3D models with rough joint surfaces was ***,the mechanical behavior of rock–backfill shearing dislocation was investigated using a direct shear *** effects of interface roughness on the shear–displacement curve and failure characteristics of rock–backfill specimens were *** 3D fractal dimen-sion,profile line joint roughness coefficient(JRC),profile line two-dimensional fractal dimension,and the surface curvature of the frac-tures were *** correlation characterization of surface roughness was then analyzed,and the shear strength could be measured and calculated using *** results showed the following:there were three failure threshold value points in rock–backfill shearing dis-location:30%–50%displacement before the peak,70%–90%displacement before the peak,and 100%displacement before the peak to post-peak,which could be a sign for rock–backfill shearing dislocation *** surface JRC could be used to judge the rock–backfill shearing dislocation failure,including post-peak sliding,uniform variations,and gradient change,corresponding to rock–backfill disloca-tion failure on the field *** research reveals the damage mechanism for rock–backfill complexes based on the free joint surface,fills the gap of existing shearing theoretical systems for isomerism complexes,and provides a theoretical basis for the prevention and control of possible disasters in backfill mining.

摘要：Layered oxide is a promising cathode material for sodium-ion batteries because of its high-capacity,high operating voltage,and simple *** performance is an important criterion for evaluating the application prospects of ***,facing challenges,including phase transitions,ambient stability,side reactions,and irreversible anionic oxygen activity,the cycling performance of layered oxide cathode materials still cannot meet the application ***,this review proposes several strategies to address these ***,bulk doping is introduced from three aspects:cationic single doping,anionic single doping,and multi-ion ***,homogeneous surface coating and concentration gradient modification are *** addition,methods such as mixed structure design,particle engineering,high-entropy material construction,and integrated modification are ***,a summary and outlook provide a new horizon for developing and modifying layered oxide cathode materials.

摘要：The worldwide proliferation of portable electronics has resulted in a dramatic increase in the number of spent lithium-ion batteries(LIBs).However,traditional recycling methods still have limitations because of such huge amounts of spent ***,we proposed an ecofriendly and sustainable double recycling strategy to concurrently reuse the cathode(LiCoO_(2))and anode(graphite)materials of spent LIBs and recycled LiCoPO_(4)/graphite(RLCPG)in Li^(+)/PF^(-)_(6) co-de/intercalation dual-ion *** recycle-derived dualion batteries of Li/RLCPG show impressive electrochemical performance,with an appropriate discharge capacity of 86.2 mAh·g^(-1) at25 mA·g^(-1) and 69%capacity retention after 400 *** recycling of the cathode and anode from spent LIBs avoids wastage of resources and yields cathode materials with excellent performance,thereby offering an ecofriendly and sustainable way to design novel secondary batteries.

摘要：Solid solution-strengthened copper alloys have the advantages of a simple composition and manufacturing process,high mechanical and electrical comprehensive performances,and low cost;thus,they are widely used in high-speed rail contact wires,electronic component connectors,and other *** the contradiction between low alloying and high performance is an important challenge in the development of solid solution-strengthened copper *** the typical solid solution-strengthened alloy Cu-4Zn-1Sn as the research object,we proposed using the element In to replace Zn and Sn to achieve low alloying in this *** new alloys,Cu-1.5Zn-1Sn-0.4In and Cu-1.5Zn-0.9Sn-0.6In,were designed and *** total weight percentage content of alloying elements decreased by 43%and 41%,respectively,while the product of ultimate tensile strength(UTS)and electrical conductivity(EC)of the annealed state increased by 14%and 15%.After cold rolling with a 90%reduction,the UTS of the two new alloys reached 576 and 627MPa,respectively,the EC was 44.9%IACS and 42.0%IACS,and the product of UTS and EC(UTS×EC)was 97%and 99%higher than that of the annealed state *** dislocations proliferated greatly in cold-rolled alloys,and the strengthening effects of dislocations reached 332 and 356 MPa,respectively,which is the main reason for the considerable improvement in mechanical properties.

摘要：Nonreciprocity of thermal metamaterials has significant application prospects in isolation protection,unidirectional transmission,and energy ***,due to the inherent isotropic diffusion law of heat flow,it is extremely difficult to achieve nonreciprocity of heat *** review presents the recent developments in thermal nonreciprocity and explores the fundamental theories,which underpin the design of nonreciprocal thermal metamaterials,i.e.,the Onsager reciprocity ***,three methods for achieving nonreciprocal metamaterials in the thermal field are elucidated,namely,nonlinearity,spatiotemporal modulation,and angular momentum bias,and the applications of nonreciprocal thermal metamaterials are *** also discuss nonreciprocal thermal ***,the potential applications of nonreciprocity to other Laplacian physical fields are ***,the prospects for advancing nonreciprocal thermal metamaterials are highlighted,including developments in device design and manufacturing techniques and machine learning-assisted material design.

摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.