摘要：Anterior cruciate ligament(ACL)injuries of the knee are one of the most common and serious athletic *** widely used cortical suspension fixation buttons for ligament reconstruction are permanent implants,particularly those made from conventional steel or titanium *** this study,a biodegradable Zn-0.45Mn-0.2Mg(ZMM42)alloy with the yield strength of 300.4 MPa and tensile strength of 329.8 MPa was prepared through hot *** use of zinc alloys in the preparation of cortical suspension fixation buttons was proposed for the first *** 35 d of immersion in simulated body fluids,the ZMM42 alloy fixation buttons were degraded at a rate of 44μm/a,and the fixation strength was retained(379.55 N)in the traction ***,the ZMM42 alloy fixation buttons exhibited an increase in MC3T3-E1 cell viability and high antibacterial activity against Escherichia coli and Staphylococcus *** results reveal the potential of biodegradable zinc alloys for use as ligament reconstruction materials and for developing diverse zinc alloy cortical suspension fixation devices.

摘要：Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue ***,these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end *** previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of ***,the intricate interaction among elements considerably affects the oxidation resistance of *** this paper,Co-35Ni-10Al-2W-5Cr-2Mo-1Nb-xTi-(5−x)Ta alloys(x=1,2,3,4)with varying Ti and Ta contents were designed and compounded,and their oxidation resistance was investigated at the temperature range from 800 to 1000℃.After oxidation at three test conditions,namely,800℃for 200 h,900℃for 200 h,and 1000℃for 50 h,the main structure of the oxide layer of the alloy consisted of spinel,Cr_(2)O_(3),and Al_(2)O_(3)from outside to *** consisting of Ta,W,and Mo formed below the Cr_(2)O_(3)*** interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta ***,an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the *** study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide *** results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.

摘要：昌吉—古泉±1100 kV特高压直流输电工程是世界上首个±1100 kV特高压直流输电工程,额定输送功率12 GW,直流线路全长3320 km。对于该电压等级和输送容量的直流工程,目前世界上尚无成熟的设计经验及完备的理论体系支撑。针对±1100 kV昌吉—古泉特高压直流输电工程,研究提出了±1100 kV特高压直流输电工程的成套设计方案和关键设备参数,在工程主接线拓扑结构、换流变压器短路阻抗选择、主回路参数、无功配置和交流滤波器设计、直流滤波器优化设计、过电压与绝缘配合、户内外直流场选型、直流滤波器带电检修、阀厅和直流场概念设计以及主设备概念设计等方面开展了深入的研究和论述。文中的研究成果已应用于昌吉—古泉±1100 kV特高压直流输电工程,并将为后续±1100 kV和±800 kV特高压直流输电工程成套设计提供理论和经验支持。

摘要：The developable surface is an important surface in computer aided design, geometric modeling and industrial manufactory. It is often given in the standard parametric form, but it can also be in the implicit form which is commonly used in algebraic geometry. Not all algebraic developable surfaces have rational parametrizations. In this paper, the authors focus on the rational developable surfaces. For a given algebraic surface, the authors ?rst determine whether it is developable by geometric inspection, and then give a rational proper parametrization in the affrmative case. For a rational parametric surface, the authors also determine the developability and give a proper reparametrization for the developable surface.

摘要：Poly(dibutyl itaconate-co-isoprene-co-methacrylic acid)(PDIM) elastomer was designed and synthesized by redox emulsion polymerization under mild conditions. PDIM has high molecular weight, relatively high yield, and low glass transition temperature(Tg). The structure of PDIM was determined by FTIR and NMR, and the carboxyl content was obtained by titration in a non-proton solvent. Tensile strength and elongation at break increased with increasing carboxyl content. In addition, the interaction between PDIM and silica was elucidated by rubber process analyzer(RPA) and TEM, and the results showed that the silica-PDIM interaction was strong, but the silica-silica interaction was weak.

摘要：Information centric networking(ICN) is a new network architecture that is centred on accessing content. It aims to solve some of the problems associated with IP networks, increasing content distribution capability and improving users' experience. To analyse the requests' patterns and fully utilize the universal cached contents, a novel intelligent resources management system is proposed, which enables effi cient cache resource allocation in real time, based on changing user demand patterns. The system is composed of two parts. The fi rst part is a fi ne-grain traffi c estimation algorithm called Temporal Poisson traffi c prediction(TP2) that aims at analysing the traffi c pattern(or aggregated user requests' demands) for different contents. The second part is a collaborative cache placement algorithm that is based on traffic estimated by TP2. The experimental results show that TP2 has better performance than other comparable traffi c prediction algorithms and the proposed intelligent system can increase the utilization of cache resources and improve the network capacity.

摘要：Power System Stabilizer (PSS) was proposed during 1960s to solve the low frequency oscillation problem raised by the wide application of the high-gain fast-response exciters. The fundamentals of PSS design lie in the angle compensation to increase the damping torque, which, since then, has become an important principle in designing the various power system dampers, such as SVC, TCSC, UPFC. Although many papers have been dedicated to the application of this principle, it is interesting to note that in the real industry applications PSS parameters have to be carefully tuned on site in spite of its mature design theory. So does the classical PSS design theory really meet the PSS design demand? By combining the frequency domain and the time domain analysis, this paper reinvestigates the basic idea behind the classical PSS design theory. The paper clarifies the con-cepts of the synchronous torque as well as the damping torque and proves that the classical PSS design principles based on these concepts are not theoretically sound. Then the paper discusses the Linear Optimal Controller Design method and ana-lyzes its relations with the conventional PID design. By doing so the paper reveals the real mechanism of the PSS and proposes to use more systematic and advanced control tools to enhance the controller performance.

摘要：为了针对不同的应用和流量提供服务质量保障和差异化服务,负载均衡和多优先级队列技术被广泛地应用于网络中。在传统网络中,网络管理员经常使用"traceroute"和"ping"工具来检测负载均衡机制或者服务质量策略是否正常工作。然而,由于这些工具并不被现有的OpenFlow交换机所支持,所以还不能够应用于软件定义网络中。此外,traceroute和ping依靠主动发送探测包来探测路径。然而,当负载均衡机制把探测包和所需追踪流的数据包均衡到不同路径时,这些工具将无法探测出流的真实转发路径,更无法测量出真实的路径时延。因此,为了准确的测量链路时延,测量工具必须能够提前找出数据包的真实转发路径。基于此发现,我们提出了一套新的软件定义网络中的流追踪机制"FlowTrace",利用它来追踪任意流量的转发路径以及测量数据流所经历的链路时延。该工具通过收集交换机的流表来计算流的转发路径。然而,如果直接从交换机中查询流表会产生很大的数据平面流量,从而带来巨大的开销。因此,我们提出了一种被动的零开销的流表收集方法来解决该问题。在获得流的真实转发路径后,我们提出了一种新的测量方法来测量不同流的网络时延。最后,实验结果显示我们设计的方法可以准确的找出流的真实转发路径并测量出不同种类流所经历的时延。

摘要：Heterogeneous cellular networks(HCNs), by introducing caching capability, has been considered as a promising technique in 5 G era, which can bring contents closer to users to reduce the transmission delay, save scarce bandwidth resource. Although many works have been done for caching in HCNs, from an energy perspective, there still exists much space to develop a more energy-efficient system when considering the fact that the majority of base stations are under-utilized in the most of the time. Therefore, in this paper, by taking the activation mechanism for the base stations into account, we study a joint caching and activation mechanism design to further improve the energy efficiency, then we formulate the optimization problem as an Integer Linear programming problem(ILP) to maximize the system energy saving. Due to the enormous computation complexity for finding the optimal solution, we introduced a Quantum-inspired Evolutionary Algorithm(QEA) to iteratively provide the global best solution. Numerical results show that our proposed algorithm presents an excellent performance, which is far better than the strategy of only considering caching without deactivation mechanism in the actual, normal situation. We also provide performance comparison amongour QEA, random sleeping algorithm and greedy algorithm, numerical results illustrate our introduced QEA performs best in accuracy and global optimality.

摘要：近年来,随着一次能源过度消耗所带来的能源和环境问题日益突出,开发廉价、可持续的清洁能源备受关注.光催化分解水制氢可利用太阳能普遍率高和几乎免费等特点制取燃烧热值高、燃烧产物无污染的氢气能源.自从1972年日本的Fujishima教授和Honda教授首次发现TiO2单晶电极光催化分解水可以产生氢气以来,光催化制氢被认为是实现可持续制氢最有潜力的方法之一.有效地将太阳能转换为化学能的关键是设计高效的电荷分离和运输结构.然而,现有的大多数半导体光催化剂因缺少活性位点、光生载流子易复合等缺点而无法达到较高的转换效率.因此,如何提高半导体光催化产氢的转换效率是现阶段面对的重要问题.在众多解决方法中,助催化剂的引入可以为光催化制氢反应增加活性位点,促进光生载流子的有效分离,进而有效地提高半导体光催化产氢速率.本文总结了多种不同类型的助催化剂应用于光催化产氢研究的最新进展,详细讨论了助催化剂在增强光吸收、提供活性位点、增加催化剂稳定性和促进电荷分离等方面的作用,阐明了助催化剂在光催化分解水制氢中的反应机理,同时还提出了光催化制氢的未来研究和预测.本文将助催化剂分为以下几种类别进行讨论:(1)单一助催化剂,包括金属/合金、金属氧化物/氢氧化物、金属磷化物、金属硫化物、碳基材料等助催化剂材料;(2)双助催化剂;(3)Z-Scheme助催化剂;(4)MOFs助催化剂.近年来,助催化剂材料在光催化产氢中应用的发展趋势从当初价格昂贵的贵金属趋于价格相对低廉的非贵金属,从单一体系趋于更复杂的体系.虽然现阶段关于助催化剂与基底之间的匹配还需要进一步研究,但我们相信随着技术的发展,这些问题都可以迎刃而解.希望在不久的将来,可以精确设计和构建出具有高效光催化产氢活性的催化剂体系,开发出更多新的可再生清洁能源,从而缓解能源紧缺和环境恶化等棘手问题.