摘要：Anterior cruciate ligament(ACL)injuries of the knee are one of the most common and serious athletic *** widely used cortical suspension fixation buttons for ligament reconstruction are permanent implants,particularly those made from conventional steel or titanium *** this study,a biodegradable Zn-0.45Mn-0.2Mg(ZMM42)alloy with the yield strength of 300.4 MPa and tensile strength of 329.8 MPa was prepared through hot *** use of zinc alloys in the preparation of cortical suspension fixation buttons was proposed for the first *** 35 d of immersion in simulated body fluids,the ZMM42 alloy fixation buttons were degraded at a rate of 44μm/a,and the fixation strength was retained(379.55 N)in the traction ***,the ZMM42 alloy fixation buttons exhibited an increase in MC3T3-E1 cell viability and high antibacterial activity against Escherichia coli and Staphylococcus *** results reveal the potential of biodegradable zinc alloys for use as ligament reconstruction materials and for developing diverse zinc alloy cortical suspension fixation devices.

摘要：Co-Ni-based superalloys are known for their capability to function at elevated temperatures and superior hot corrosion and thermal fatigue ***,these alloys show potential as crucial high-temperature structural materials for aeroengine and gas turbine hot-end *** previous work elucidated the influence of Ti and Ta on the high-temperature mechanical properties of ***,the intricate interaction among elements considerably affects the oxidation resistance of *** this paper,Co-35Ni-10Al-2W-5Cr-2Mo-1Nb-xTi-(5−x)Ta alloys(x=1,2,3,4)with varying Ti and Ta contents were designed and compounded,and their oxidation resistance was investigated at the temperature range from 800 to 1000℃.After oxidation at three test conditions,namely,800℃for 200 h,900℃for 200 h,and 1000℃for 50 h,the main structure of the oxide layer of the alloy consisted of spinel,Cr_(2)O_(3),and Al_(2)O_(3)from outside to *** consisting of Ta,W,and Mo formed below the Cr_(2)O_(3)*** interaction of Ti and Ta imparted the highest oxidation resistance to 3Ti2Ta ***,an excessive amount of Ti or Ta resulted in an adverse effect on the oxidation resistance of the *** study reports the volatilization of W and Mo oxides during the oxidation process of Co-Ni-based cast superalloys with a high Al content for the first time and explains the formation mechanism of holes in the oxide *** results provide a basis for gaining insights into the effects of the interaction of alloying elements on the oxidation resistance of the alloys they form.

摘要：昌吉—古泉±1100 kV特高压直流输电工程是世界上首个±1100 kV特高压直流输电工程,额定输送功率12 GW,直流线路全长3320 km。对于该电压等级和输送容量的直流工程,目前世界上尚无成熟的设计经验及完备的理论体系支撑。针对±1100 kV昌吉—古泉特高压直流输电工程,研究提出了±1100 kV特高压直流输电工程的成套设计方案和关键设备参数,在工程主接线拓扑结构、换流变压器短路阻抗选择、主回路参数、无功配置和交流滤波器设计、直流滤波器优化设计、过电压与绝缘配合、户内外直流场选型、直流滤波器带电检修、阀厅和直流场概念设计以及主设备概念设计等方面开展了深入的研究和论述。文中的研究成果已应用于昌吉—古泉±1100 kV特高压直流输电工程,并将为后续±1100 kV和±800 kV特高压直流输电工程成套设计提供理论和经验支持。

摘要：Photocatalytic hydrogen(H2)evolution via water spilling over semiconductors has been considered to be one of the most promising strategies for sustainable energy supply in the future to provide non-pollution and renewable *** key to efficient conversion of solar-chemical energy is the design of an efficient structure for high charge separation and ***,cocatalysts are necessary in boosting photocatalytic H2 *** date,semiconductor photocatalysts have been modified by various cocatalysts due to the extended light harvest,enhanced charge carrier separation efficiency and improved *** review focuses on recent developments of cocatalysts in photocatalytic H2 evolution,the roles and mechanism of the cocatalysts are discussed in *** cocatalysts can be divided into the following categories:metal/alloy cocatalysts,metal phosphides cocatalysts,metal oxide/hydroxide cocatalysts,carbon-based cocatalysts,dual cocatalysts,Z-scheme cocatalysts and MOFs *** future research and forecast for photocatalytic hydrogen generation are also suggested.

摘要：The developable surface is an important surface in computer aided design, geometric modeling and industrial manufactory. It is often given in the standard parametric form, but it can also be in the implicit form which is commonly used in algebraic geometry. Not all algebraic developable surfaces have rational parametrizations. In this paper, the authors focus on the rational developable surfaces. For a given algebraic surface, the authors first determine whether it is developable by geometric inspection, and then give a rational proper parametrization in the affrmative case. For a rational parametric surface, the authors also determine the developability and give a proper reparametrization for the developable surface.

摘要：A series of K-doped Mn0.5Ce0.5Oδ （K-MCO） catalysts with three-dimensionally ordered macroporous （3DOM） structure and different K loadings were successfully synthesized using simple methods. These catalysts exhibited well-defined 3DOM nanostructure, which consisted of extensive interconnecting networks of spherical voids. The effects of the calcination temperature and calcination time on the morphological characteristics and crystalline forms of the catalysts were systematically studied. The catalysts showed high catalytic activity for the combustion of soot. 3DOM 20% K-MCO-4h catalyst, in particular, showed the highest catalytic activity of all of the catalysts studied （e.g., Ts0 = 331 ~C and Smco2 = 95.3%）. The occurrence of structural and synergistic effects among the K, Mn, and Ce atoms in the catalysts was favorable for enhancing their catalytic activity towards the combustion of diesel soot. Furthermore, the temperatures required for the complete combustion of the soot （〈400 ℃） were well within the exhaust temperature range （175-400 ℃）, which means that the accumulated soot can be removed under the conditions of the diesel exhaust gas. These catalysts could therefore be used in numerous practical applications because they are easy to synthesize, exhibit high catalytic activity, and can be made from low cost materials.

摘要：Poly(dibutyl itaconate-co-isoprene-co-methacrylic acid)(PDIM) elastomer was designed and synthesized by redox emulsion polymerization under mild conditions. PDIM has high molecular weight, relatively high yield, and low glass transition temperature(Tg). The structure of PDIM was determined by FTIR and NMR, and the carboxyl content was obtained by titration in a non-proton solvent. Tensile strength and elongation at break increased with increasing carboxyl content. In addition, the interaction between PDIM and silica was elucidated by rubber process analyzer(RPA) and TEM, and the results showed that the silica-PDIM interaction was strong, but the silica-silica interaction was weak.

摘要：Information centric networking(ICN) is a new network architecture that is centred on accessing content. It aims to solve some of the problems associated with IP networks, increasing content distribution capability and improving users' experience. To analyse the requests' patterns and fully utilize the universal cached contents, a novel intelligent resources management system is proposed, which enables effi cient cache resource allocation in real time, based on changing user demand patterns. The system is composed of two parts. The fi rst part is a fi ne-grain traffi c estimation algorithm called Temporal Poisson traffi c prediction(TP2) that aims at analysing the traffi c pattern(or aggregated user requests' demands) for different contents. The second part is a collaborative cache placement algorithm that is based on traffic estimated by TP2. The experimental results show that TP2 has better performance than other comparable traffi c prediction algorithms and the proposed intelligent system can increase the utilization of cache resources and improve the network capacity.

摘要：Power System Stabilizer (PSS) was proposed during 1960s to solve the low frequency oscillation problem raised by the wide application of the high-gain fast-response exciters. The fundamentals of PSS design lie in the angle compensation to increase the damping torque, which, since then, has become an important principle in designing the various power system dampers, such as SVC, TCSC, UPFC. Although many papers have been dedicated to the application of this principle, it is interesting to note that in the real industry applications PSS parameters have to be carefully tuned on site in spite of its mature design theory. So does the classical PSS design theory really meet the PSS design demand? By combining the frequency domain and the time domain analysis, this paper reinvestigates the basic idea behind the classical PSS design theory. The paper clarifies the con-cepts of the synchronous torque as well as the damping torque and proves that the classical PSS design principles based on these concepts are not theoretically sound. Then the paper discusses the Linear Optimal Controller Design method and ana-lyzes its relations with the conventional PID design. By doing so the paper reveals the real mechanism of the PSS and proposes to use more systematic and advanced control tools to enhance the controller performance.

摘要：Au/3DOM（three-dimensionally ordered macroporous） Al2O3 and Au/CeO2/3DOM Al2O3 were prepared using a reduction-deposition method and characterized using scanning electron microscopy,N2 adsorption-desorption,X-ray diffraction,transmission electron microscopy,ultraviolet-visible spectroscopy,temperature-programmed hydrogen reduction,and X-ray photoelectron *** nanoparticles of similar sizes were well dispersed and supported on the inner walls of uniform *** norminal Au loading is 2%.Al-Ce-O solid solution in CeO2/3DOM Al2O3 catalysts can be formed due to the incorporation of Al^3＋ ions into the ceria lattice,which causes the creation of extrinsic oxygen *** extrinsic oxygen vacancies improved the oxygen-transport *** strong metal-support interactions between Au and CeO2 increased the amount of active oxygen on the Au nanoparticle surfaces,and this promoted soot *** activities of the Au-based catalysts were higher than those of the supports（Al2O3 or CeO2/3DOM Al2O3） at low ***/CeO2/3DOM Al2O3 had the highest catalytic activity for soot combustion,with T（10）,T（50）,and T（90） values of 273,364,and 412℃,respectively.