摘要：The A–D–A′–D–A-type non-fused ring electron acceptors(NFREAs),consisting of electron-donating unit(D)as the bridge to link electron-accepting units(A and A′),have emerged as promising electron acceptors for organic solar cells(OSCs)and organic photodetectors(OPDs).As the units are linked by the carbon–carbon single bonds,these electron acceptors generally possess feasible synthesis and tunable optoelectronic ***,the recent progress of A–D–A′–D–A-type NFREAs is reviewed,including molecular design,device performance,structure–property relationships,and their applications in OSCs and ***,we discuss the challenges and propose the perspectives for the further development of A–D–A′–D–A-type NFREAs.

摘要：During oil-gas well drilling and completion, downhole tools and apparatus should be conveyed to the destination to complete a series of downhole works. Downhole tractors have been used to convey tools in complex wellbores, however a very large tractive force is needed to carry more downhole tools to accomplish works with high efficiency. A novel serial active helical drive downhole tractor which has significantly improved performance compared with previous work is proposed. All previously reported helical drive downhole tractors need stators to balance the torque generated by the rotator. By contrast, the proposed serial downhole tractor does not need a stator; several rotator-driven units should only be connected to one another to achieve a tractive force multifold higher than that was previously reported. As a result, the length of a single unit is shortened, and the motion flexibility of the downhole tractor is increased. The major performance indicators, namely, gear ratio, velocity, and tractive force, are analyzed. Experimental results show that the maximum tractive force of a single-unit prototype with a length of 900 mm is 165.3 kg or 1620 N. The analysis and experimental results show that the proposed design has considerable potential for downhole works.

摘要：To gain a deep insight into the hot drawing process of aluminum alloy sheet, simulations of cylindrical cup drawing at elevated temperatures were carried out with experimental validation. The influence of four important process parameters, namely,punch velocity, blank holder force(BHF), friction coefficient and initial forming temperature of blank on drawing characteristics(*** thickness and thickness deviation) was investigated with the help of design of experiments(DOE), analysis of variance(ANOVA) and analysis of mean(ANOM). Based on the results of ANOVA, it is shown that the blank holder force has the greatest influence on minimum thickness. The importance of punch velocity for thickness deviation is 44.35% followed by BHF of 24.88%,friction coefficient of 15.77% and initial forming temperature of blank of 14.995%. After determining the significance of each factor on forming characteristics, how the individual parameter affects characteristics was further analyzed by ANOM.

摘要：A new type of pit supporting structure, which was tested and verified using the sensor monitoring technology, was presented. The new supporting structure is assembled by prefabricated steel structural units. The adjacent steel structural units are jointed with fasteners, and each steel structural unit has a certain radian and is welded by two steel tubes and one piece of steel disc. In order to test and verify the reliability of the new supporting structure, the field tests are designed. The main monitoring programs include the hoop stress of supporting structure, lateral earth pressure, and soil deformation. The monitoring data of the field tests show that the new supporting structure is convenient, reliable and safe.

摘要：The full-duplex(FD) based wireless communication devices,which are capable of concurrently transmitting and receiving signals with a single frequency band,suffer from a severe self-interference(SI) due to the large power difference between the devices' own transmission and the useful signal comes from the remote transmitters. To enable the practical FD devices to be implementable,the SI power must be sufficiently suppressed to the level of background noise power,making the received signal-to-interference-plus-noise ratio(SINR) satisfy the decoding requirement. In this paper,the design and implementation of the duplexer for facilitating SI cancellation in FD based wireless communications are investigated,with a new type of duplexer(i.e. an improved directional coupler) designed for improving the spatial suppression of the SI power. Furthermore,the practical circuit boards are designed and verified for the proposed prototype,showing that the spatial suppression capability may be up to 36 d B(i.e. much higher than that attainable in the commonly designed ferrite circulator) by using the proposed design.

摘要：Since sulfonylurea is one of the most potent acetohydroxyacid synthase（AHAS） inhibitors, a series of novel sulfonylureas containing an oxime ether moiety was designed and synthesized and their chemical structures were determined by means of 1H nuclear magnetic resonance（NMR）, 13C NMR and high-resolution mass spectrometry（HRMS）. In the herbicidal bioassay, several compounds showed moderate to good herbicidal activities against dicotyledons, but their activities against monocotyledons decreased. The in vitro antifungal activity was tested at a dosage of 50 mg/L. And the results show that compounds 71, 7m and 7n exhibit promising antifungal activities against six common plant pathogenic fungi. Further investigations on molecular modification are in progress.

摘要：In this paper, we present a three-dimensional（3D） vacuum packaging technique at a wafer level for a radio frequency micro-electromechanical system（RF MEMS） resonator, in which low-loss silicon vias is used to transmit RF ***–Sn solder bonding is adopted to provide a vacuum encapsulation as well as electrical conductions. A RF model of the encapsulation cap is established to evaluate the parasitic effect of the packaging, which provides an effective design solution of 3D RF MEMS encapsulation. With the proposed packaging structure, the signal-to-background ratio（SBR） of 24 dB is achieved, as well as the quality factor（Q-factor） of the resonator increases from 8000 to 10400 after *** packaged resonator has a linear frequency–temperature（ f –T） characteristic in a temperature range between 0℃ and 100℃. And the package shows favorable long-term stability of the Q-factor over 200 days, which indicates that the package has excellent hermeticity. Furthermore, the average shear strength is measured to be 43.58 MPa among 10 samples.

摘要：In this paper,we introduce a novel approach to automatically regulate receptive fields in deep image parsing *** previous work which placed much importance on obtaining better receptive fields using manually selected dilated convolutional kernels,our approach uses two affine transformation layers in the network’s backbone and operates on feature *** maps are inflated or shrunk by the new layer,thereby changing the receptive fields in the following *** use of end-to-end training,the whole framework is data-driven,without laborious manual *** proposed method is generic across datasets and different *** have conducted extensive experiments on both general image parsing tasks,and face parsing tasks as concrete examples,to demonstrate the method’s superior ability to regulate over manual designs.

摘要：A numerical solution based on the Steffensen stable point iterative method is proposed to resolve the transcendental frequency equation of a stay cable-damper system. The frequency equation, which considers clamped supports and fl exural rigidity of the cable, is intended to investigate the infl uence of the parameters of the cable damper system on its dynamic characteristics. Two factors involved in the design and construction phases, the damping coeffi cient induced by external dampers and the cable tension, are the focus of this study. Their impact on modal frequencies and damping ratios in these two phases of cable-damper systems are investigated by resolving the equation with the proposed solution. It is shown that the damping coeffi cient and cable tension exert more noticeable effects on the modal damping ratios than on the modal frequencies of stay cable-damper systems, and the two factors can serve as design variables in the design phase and as adjustment factors in the construction phase. On the basis of the results, a roadmap for system-level optimal design of stay cable-damper systems that can achieve global optimal vibration suppression for the entire bridge is proposed and discussed.

摘要：Aqueous zinc-ion batteries(AZIBs)show great potential for applications in grid-scale energy storage,given their intrinsic safety,cost effectiveness,environmental friendliness,and impressive electrochemical ***,strong electrostatic interactions exist between zinc ions and host materials,and they hinder the development of advanced cathode materials for efficient,rapid,and stable Zn-ion *** and their derivatives possess a large interlayer spacing,excellent hydrophilicity,outstanding electronic conductivity,and high redox *** materials are considered“rising star”cathode candidates for *** comprehensive review discusses recent advances in MXenes as AZIB cathodes from the perspectives of crystal structure,Zn-storage mechanism,surface modification,interlayer engineering,and conductive network design to elucidate the correlations among their composition,structure,and electrochemical *** work also outlines the remaining challenges faced by MXenes for aqueous Zn-ion storage,such as the urgent need for improved toxic preparation methods,exploration of potential novel MXene cathodes,and suppression of layered MXene restacking upon cycling,and introduces the prospects of MXene-based cathode materials for high-performance AZIBs.