摘要：Aquaculture in South korea largely involves crudely-built plastic fishery houses that consume excessive electricity and produce carbon *** study explores a potential method to make korean aquaculture more sustainable by suggesting design alternatives that can save energy and *** this end,the authors compare the energy use and indoor environments of three different designs through field *** three designs include(i)a triple-layered plastic screen house(Design 1),(ii)an insulated vault house(Design 2),and(iii)a passive-house design(Design 3),in addition to(iv)a single-layered plastic house(baseline).Our findings indicate that,compared to the baseline,operational electricity was reduced to 57.81% in Design 1,53.92% in Design 2,and 40.59% in Design ***,Designs 2 and 3 were able to mitigate indoor temperature fluctuations in *** 1 showed a relatively unstable temperature distribution during the night but offered better farming conditions than the *** often rose to 100% but did not affect the maintenance of a desirable fish and workplace *** a high concentration of carbon dioxide of up to 3,000 ppm in Designs 1 and 2 was not expected to harm farmers’*** analyses revealed that construction expenses increased to 20.9% in Design 1,135.8% in Design 2,and 73.9% in Design 3 due to large quantities of materials and *** trade-offs with energy saving,the payback period is 7.2 years for Design 1,35.5 years for Design 2,and 17.9 years for Design *** that the lifetime expectancy of Designs 1 and 3 is over two years,the study’s results confirm that Designs 1 and 3 have a comparative advantage in producing sustainable fish-farming houses.

摘要：This study on the development of a psychotherapy program based on the relationship between forests and human health focused on actively considering the natural ecological environment. This study categorized and compared an art psychotherapy program that simply moved to an outdoor space and a forest-art therapy program that actively utilized the forest environment as a medium. The characteristics of the natural environment, such as openness, change, and diversity, shortened the amount of time participants took to develop a rapport and open up and played a vital role in recovering mental health. After a bold attempt at integrating forest environment and art psychotherapy by going beyond outdoor art therapy, there were significant results pertaining to improvements in mental disorders in today’s society, including stress vulnerabilities, depression, anxiety, and aggression. The research results verified that the developed forest-art therapy method had greater efficacy in relation to both the Stress Vulnerability-Interpersonal Sensitivity Scale and the Stress Vulnerability-Self-Regulation Scale.

摘要：An optimal configuration of the flux-reversal linear synchronous motor (FRLSM) with the optimal number of attachment permanent magnets (PMs) was presented. The optimal model of 2 000 N was designed to reduce the detent force by redesigning the air-gap structure and skewing. The design parameters,mover PMs and stator core,were selected for optimal design by DOE. The thrust and the detent force of the designed optimal models were compared by finite element analysis (FEA). As a result,the thrust of the optimal model is slightly decreased by 1.97% compared with the basic model,and the detent force of the optimal model is greatly decreased by 88.47% compared with the basic model.

摘要：The design solutions for breadth cam mechanism was presented. The main topics of the shape design for breadth cam was to calculate the coordinate at each contact point to determine the cam profile. The proposed method according to velocity and geometric relationships of instant velocity centers can easily determine each contact point at any instant moment. The cam profile was defined by contouring of the contact points. And also a program was developed by using Microsoft Visual C++ program,which can quickly and easily draw a 2D cam profile through the displacement diagram. Finally,the program was used to confirm the accuracy on the breadth cam profile design by computer animation graphically.

摘要：A multi-bit antifuse-type one-time programmable （OTP） memory is designed, which has a smaller area and a shorter programming time compared with the conventional single-bit antifuse-type OTP memory. While the conventional antifuse-type OTP memory can store a bit per cell, a proposed OTP memory can store two consecutive bits per cell through a data compression technique. The 1 kbit OTP memory designed with Magnachip 0.18 μm CMOS （complementary metal-oxide semiconductor） process is 34% smaller than the conventional single-bit antifuse-type OTP memory since the sizes of cell array and row decoder are reduced. And the programming time of the proposed OTP memory is nearly 50% smaller than that of the conventional counterpart since two consecutive bytes can be compressed and programmed into eight OTP cells at once. The layout area is 214 μm× 327 μ,, and the read current is simulated to be 30.4 μA.

摘要：The wear rate between the rotors of a hypotrochoidal gear pump is *** the knowledge of shape design on the rotors,the contact stresses without hydrodynamic effect between the rotor teeth were evaluated through the calculation of the Hertzian contact *** on the above results and the sliding velocity between the rotors,a genetic algorithm (GA) was used as an optimization technique forminimizing the wear rate proportional factor (WRPF).The result shows that the wear rate or the WRPF can be reduced considerably,*** 12.8%,throughout the optimization using GA.

摘要：Factors for determining the spindle size are the shaft diameter, positions of bearing and motor, and entire length of the spindle. Then, it is important to find the assembling of the optimal design variables, which satisfy the stiffimss and rotational speed required to the spindle. A general full factorial design method was used to verify some factors that affect the natural frequency of a spindle. It is verified that the shorter shaft length and bearing span length represent the higher natural frequency, and there are some effects according to the change in the levels of factors. The detailed spindle dimension is determined by applying an EVD method, which can define the optimal bearing position through considering the limiting condition. Based on the estimated regression model, the optimal spindle size and bearing distance that can improve the primary natural frequency are obtained, and the influence of design factors on the natural frequency is also analyzed.

摘要：We review a recent work on masses of mesons and nucleons within a hard wall model of holographic QCD in a unified *** order to treat meson and nucleon properties on the same footing,we introduced the same infrared （IR） cut for both *** framework of present approach,the best fit to the experimental data is achieved introducing the anomalous dimension for baryons.

摘要：V-type ultrasonic linear motor fabricated using a simple punching technique was proposed to utilize as an actuator of small precision *** stator of the motor is composed of a thin elastic body and four ceramics attached to the upper and bottom areas of the *** ceramics have each direction of *** two harmonic voltages with a 90° phase difference are applied to the ceramics,symmetric and anti-symmetric displacements will generate at the tip to produce an elliptical motion.A finite element analysis(ATILA) was conducted to simulate the motion pattern for the contact tip of the *** develop a model that generates the maximum displacement at contact tip,the FEM program was used for various *** addition,an optimal model was chosen by considering the magnitude and shape of the displacement according to changes in *** maximum elliptical displacement is shown by W2L11 model,which has a ratio of ceramic width to length of 1:***,the displacement of the contact tip is reduced by the bucking phenomenon if the ratio is larger than 1:6.

摘要：The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.