摘要：An adaptive mechanism is presented to reduce bandwidth usage and to optimize the use of computing resources of heterogeneous computer mixes utilized in CSCD to reach the goal of collaborative design in distributed-synchronous mode. The mechanism is realized on a C/S architecture based on operation information sharing. Firstly, messages are aggregated into packets on the client. Secondly, an outgoing-message weight priority queue with traffic adjusting technique is cached on the server. Thirdly, an incoming-message queue is cached on the client. At last, the results of implementing the proposed scheme in a simple collaborative design environment are presented.

摘要：The Main Optical Telescope (MOT) is an important payload of the Space Solar Telescope (SST) with various instruments and observation modes. Its real-time data handling and management and control tasks are arduous. Based on the advanced techniques of foreign countries, an improved structure of onboard data handling systems feasible for SST, is proposed. This article concentrated on the development of a Central Management & Control Unit (MCU) based on FPGA and DSP. Through reconfigurating the FPGA and DSP programs, the prototype could perform different tasks. Thus the inheritability of the whole system is improved. The completed dual-channel prototype proves that the system meets all requirements of the MOT. Its high reliability and safety features also meet the requirements under harsh conditions such as mine detection.

摘要：The tubing hanger is an important component of the subsea Christmas tree, experiencing big temperature difference which will lead to very high thermal stresses. On the basis of API 17D/ISO 13628-4 and ASME VIII-1, and by comprehensively considering the erosion of oil and the gravity load of the tubing, a calculation model is established by regarding design pressure and thermal stress, and the method for designing the tubing hanger of the horizontal Christmas tree under big temperature difference condition is developed from the fourth strength theory. The proposed theory for strength design of the tubing hanger in big temperature difference is verified by numerical results from ABAQUS.

摘要：The theoretical design method of enhanced sensitivity fiber grating （FBG） strain sensors was given, and moreover high qualified strain sensors were developed and fabricated, whose sensing properties were good for practical applications. The strain sensor with cylindrical shell encapsulation contained three tubular structures, due to the uneven surface structure, in the area of the strain concentration, improving the sensitivity. It could achieve the embedment strain measurement and surface measurement and had the advantages of the easy installation. The good agreement was obtained between the measurements and theoretical simulation results. After each calibration test, twenty-four FBG strain sensors and six FBG temperature compensation sensors have been installed on the undersurface of the box girder of Diaoshuiyan bridge in Yongtaiwen highway. Finally, we built up a long-term structure health system for the highway bridge.

摘要：A field experiment using a split-plot randomized complete block design with three replications was carried out to determine relationships between spectral indices and wheat grain yield （GY）, to compare the performance of four vegetation indices （VIs） for GY prediction, and to study the feasibility of VI to estimate grain protein content （GPC） in winter wheat. Two typical winter wheat （Triticum aestivum L.） cultivars ＇Xuzhou 26＇ （high protein content） and ＇Huaimai 18＇ （low protein content） were used as the main plot treatments and four N rates, i.e., 0, 120, 210, and 300 kg N ha^-1, as the sub-plot treatments. Increasing soil N supply significantly increased GY and GPC （P ≤ 0.05）. For the two cultivars combined, significant and positive correlations were found between four VIs and GY, with the strongest relationship observed when using the green ratio vegetation index （GRVI） at mid-filling. Cumulative VI estimates improved yield predictions substantially, with the best interval being heading to maturity stage. Similar results were found between VI and grain protein yield. However, when using cumulative VI, GPC showed no significant improvement. The strong relationship between leaf N status and GPC （R2 =0.9144 for ＇Xuzhou 26＇ and R2 = 0.8285 for ＇Huaimai 18＇） indicated that canopy spectra could be used to predict GPC. The strong fit between estimated and observed GPC （R2 = 0.7939） indicated that remote sensing techniques were potentially useful predictors of grain protein content and quality in wheat.

摘要：We present a method to optimize the flat-band long-period fiber Bragg grating (FBG) in this *** method is based on the p^rticle swarm optimization method and the matrix transmission *** optimized refractive modulation profile does not introduce so many phase shifts and is easier to fabricate compared with that of layer-peeling method which introduces lots of π phase shift at each zero point of apodization profile in designing for the same problem.

摘要：This paper presents an application of strut-and-tie model(STM) to design the interior anchorage zone(IAZ) in the post-tensioned concrete *** STM theory and range of IAZ are ***,based on the finite element analysis,a series of simplified equations to calculate internal forces in IAZ are ***,the STM model for IAZ is *** the proposed STM model,internal forces in ties vary with the dimension ratio and the eccentricity of *** U-turn of internal forces is suggested to allocate rebar to resist bearing flexural tensile *** with the FIP(International Federation for Prestressing) model,the proposed STM model is more reasonable and applicable.

摘要：A materials design tool for developing Pb-free soldering alloys in electronic package was developed based on comprehensive experimental data of phase equilibria and thermodynamic properties data accumulated with the CALPHAD (calculation of phase diagrams) method and contains 10 elements,namely,Ag,Au,Bi,Cu,In,Ni,Sb,Sn,Zn and *** can handle the calculation of phase diagrams in all combinations of these elements and all composition *** addition,based on this tool,the liquidus,solidus,phase fractions and constitutions,equilibrium and non-equilibrium solidification behavior,surface tension and viscosity of liquid,diffusion reactions and microstructural evolution,*** be *** examples of the calculation and application of this tool are *** design tool is expected to be a powerful tool for the development of Pb-free solders,as well as for promoting the understanding of the interfacial phenomena between Cu substrate and Pb-free solders in electronic packaging technology.

摘要：Logistics network design influences the efficiency and cost of Logistics *** manufacturing enterprises not only have warehouse hubs,but also build component processing workshops which are usually located in those places where the costs of materials and workforce are *** paper establishes a logistics network design model for the manufacturing enterprises with component processing workshops based on 0-1 mixture integer *** model optimizes the logistics network in an integrated view,by which the selection of the nodes,the manufacturing plan,and transportation plan can be *** example is given to verify its *** approach is helpful for designing of the logistics network in manufacturing enterprises.

摘要：A kind of erbium doped photosensitive fiber(EDPF) was proposed and fabricated,whose core was made of double layers named photosensitive layer and erbium doped *** double-layer core de-sign can overcome difficulties in fabrication of EDPF with single core design,*** conflict between the high consistency rare earth doping and high consistency germanium doping.A sample was fabri-cated through the modified chemical vapor deposition method combined with solution doping *** peak absorption coefficient was 48.80 dB/m at 1.53 μm,the background loss was lower than 0.1 dB/m,and the reflectivity of the fiber Brag gratings(FBG) written directly on the sample fiber was up to 97.3% by UV-writing ***,a C band tunable fiber laser was fabricated using the sample fiber,in which a uniform FBG was written directly on EDPFs as a reflector.A single wavelength lasing with a maximum wavelength tuning range of 1555.2―1558.0 nm was achieved *** this tuning range,the full-width at half maximum(FWHM) of the laser output was smaller than 0.015 nm and the side mode suppression ratio(SMSR) was better than 50 dB.