摘要：Shearing dislocation is a common failure type for rock–backfill interfaces because of backfill sedimentation and rock strata movement in backfill mining *** paper designed a test method for rock–backfill shearing *** digital image techno-logy and three-dimensional(3D)laser morphology scanning techniques,a set of 3D models with rough joint surfaces was ***,the mechanical behavior of rock–backfill shearing dislocation was investigated using a direct shear *** effects of interface roughness on the shear–displacement curve and failure characteristics of rock–backfill specimens were *** 3D fractal dimen-sion,profile line joint roughness coefficient(JRC),profile line two-dimensional fractal dimension,and the surface curvature of the frac-tures were *** correlation characterization of surface roughness was then analyzed,and the shear strength could be measured and calculated using *** results showed the following:there were three failure threshold value points in rock–backfill shearing dis-location:30%–50%displacement before the peak,70%–90%displacement before the peak,and 100%displacement before the peak to post-peak,which could be a sign for rock–backfill shearing dislocation *** surface JRC could be used to judge the rock–backfill shearing dislocation failure,including post-peak sliding,uniform variations,and gradient change,corresponding to rock–backfill disloca-tion failure on the field *** research reveals the damage mechanism for rock–backfill complexes based on the free joint surface,fills the gap of existing shearing theoretical systems for isomerism complexes,and provides a theoretical basis for the prevention and control of possible disasters in backfill mining.

摘要：In order to overcome the limitations of traditional microperforated plate with narrow sound absorption bandwidth and a single structure,two multi-cavity composite sound-absorbing materials were designed based on the shape of monoclinic crystals:uniaxial oblique structure(UOS)and biaxial oblique structure(BOS).Through finite element simulation and experimental research,the theoretical models of UOS and BOS were verified,and their sound absorption mechanisms were *** the same time,the influence of multi-cavity composites on sound absorption performance was analyzed based on the theoretical model,and the influence of structural parameters on sound absorption performance was *** research results show that,in the range of 100-2000 Hz,UOS has three sound absorption peaks and BOS has five sound absorption *** frequency range of the half-absorption bandwidth(α>0.5)of UOS and BOS increases by 242% and 229%,*** with traditional microperforated sound-absorbing structures,the series and parallel hybrid methods significantly increase the sound-absorbing bandwidth of the sound-absorbing *** research has guiding significance for noise control and has broad application prospects in the fields of transportation,construction,and mechanical design.

摘要：Layered oxide is a promising cathode material for sodium-ion batteries because of its high-capacity,high operating voltage,and simple *** performance is an important criterion for evaluating the application prospects of ***,facing challenges,including phase transitions,ambient stability,side reactions,and irreversible anionic oxygen activity,the cycling performance of layered oxide cathode materials still cannot meet the application ***,this review proposes several strategies to address these ***,bulk doping is introduced from three aspects:cationic single doping,anionic single doping,and multi-ion ***,homogeneous surface coating and concentration gradient modification are *** addition,methods such as mixed structure design,particle engineering,high-entropy material construction,and integrated modification are ***,a summary and outlook provide a new horizon for developing and modifying layered oxide cathode materials.

摘要：The worldwide proliferation of portable electronics has resulted in a dramatic increase in the number of spent lithium-ion batteries(LIBs).However,traditional recycling methods still have limitations because of such huge amounts of spent ***,we proposed an ecofriendly and sustainable double recycling strategy to concurrently reuse the cathode(LiCoO_(2))and anode(graphite)materials of spent LIBs and recycled LiCoPO_(4)/graphite(RLCPG)in Li^(+)/PF^(-)_(6) co-de/intercalation dual-ion *** recycle-derived dualion batteries of Li/RLCPG show impressive electrochemical performance,with an appropriate discharge capacity of 86.2 mAh·g^(-1) at25 mA·g^(-1) and 69%capacity retention after 400 *** recycling of the cathode and anode from spent LIBs avoids wastage of resources and yields cathode materials with excellent performance,thereby offering an ecofriendly and sustainable way to design novel secondary batteries.

摘要：Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication *** have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of *** this review,recent developments in relevant laser processes are summarized under two separate ***,transformative approaches,such as for laser-induced graphene,are *** addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic *** addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new ***,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy *** addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

摘要：Solid solution-strengthened copper alloys have the advantages of a simple composition and manufacturing process,high mechanical and electrical comprehensive performances,and low cost;thus,they are widely used in high-speed rail contact wires,electronic component connectors,and other *** the contradiction between low alloying and high performance is an important challenge in the development of solid solution-strengthened copper *** the typical solid solution-strengthened alloy Cu-4Zn-1Sn as the research object,we proposed using the element In to replace Zn and Sn to achieve low alloying in this *** new alloys,Cu-1.5Zn-1Sn-0.4In and Cu-1.5Zn-0.9Sn-0.6In,were designed and *** total weight percentage content of alloying elements decreased by 43%and 41%,respectively,while the product of ultimate tensile strength(UTS)and electrical conductivity(EC)of the annealed state increased by 14%and 15%.After cold rolling with a 90%reduction,the UTS of the two new alloys reached 576 and 627MPa,respectively,the EC was 44.9%IACS and 42.0%IACS,and the product of UTS and EC(UTS×EC)was 97%and 99%higher than that of the annealed state *** dislocations proliferated greatly in cold-rolled alloys,and the strengthening effects of dislocations reached 332 and 356 MPa,respectively,which is the main reason for the considerable improvement in mechanical properties.

摘要：Nonreciprocity of thermal metamaterials has significant application prospects in isolation protection,unidirectional transmission,and energy ***,due to the inherent isotropic diffusion law of heat flow,it is extremely difficult to achieve nonreciprocity of heat *** review presents the recent developments in thermal nonreciprocity and explores the fundamental theories,which underpin the design of nonreciprocal thermal metamaterials,i.e.,the Onsager reciprocity ***,three methods for achieving nonreciprocal metamaterials in the thermal field are elucidated,namely,nonlinearity,spatiotemporal modulation,and angular momentum bias,and the applications of nonreciprocal thermal metamaterials are *** also discuss nonreciprocal thermal ***,the potential applications of nonreciprocity to other Laplacian physical fields are ***,the prospects for advancing nonreciprocal thermal metamaterials are highlighted,including developments in device design and manufacturing techniques and machine learning-assisted material design.

摘要：High spatiotemporal resolution brain electrical signals are critical for basic neuroscience research and high-precision focus diagnostic localization,as the spatial scale of some pathologic signals is at the submillimeter or micrometer *** entails connecting hundreds or thousands of electrode wires on a limited *** study reported a class of flexible,ultrathin,highdensity electrocorticogram(ECoG)electrode *** challenge of a large number of wiring arrangements was overcome by a laminated structure design and processing technology *** flexible,ultrathin,high-density ECoG electrode array was conformably attached to the cortex for reliable,high spatial resolution electrophysiologic *** minimum spacing between electrodes was 15μm,comparable to the diameter of a single *** hundred electrodes were prepared with an electrode density of 4444 mm^(-2).In focal epilepsy surgery,the flexible,high-density,laminated ECoG electrode array with 36 electrodes was applied to collect epileptic spike waves inrabbits,improving the positioning accuracy of epilepsy lesions from the centimeter to the submillimeter *** flexible,high-density,laminated ECoG electrode array has potential clinical applications in intractable epilepsy and other neurologic diseases requiring high-precision electroencephalogram acquisition.

摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

摘要：拓扑优化由于其严格的数学理论,成为连续结构设计中决定材料分布的重要方法.然而,随着材料类型在设计域内的增加,传统拓扑优化方法的计算效率大大降低.本文提出了一种基于深度学习的拓扑优化方法,用于提高多材料结构拓扑优化设计的计算效率.首先,利用固体各向同性材料惩罚(SIMP)方法对大量多材料结构进行优化设计,构建了多材料拓扑优化数据集.其次,ResUNet被引入生成对抗式网络形成ResUNet-GAN,构建了设计参数和优化构型之间的高维映射.最后,利用预训练的ResUNet-GAN实现多材料拓扑优化设计.数值模拟验证了ResUNet-GAN成功地应用于双材料的悬臂梁、三材料悬臂梁、三材料简支梁结构的拓扑优化设计.研究表明,基于深度学习拓扑优化方法的计算效率优于传统方法,为高效拓扑优化设计的发展奠定了理论基础.