摘要：Two novel schemes of unitary space-time constellations generation based on zero vectors adding are proposed for the multiple-antenna communication system. In the first scheme, T2 zero row vectors are added into conventional unitary matrices directly, and the number of new unitary matrices obtained by different positions of the added zero vectors in T symbol duration is [T / T2 ] times larger than that of conventional unitary matrices. In the second scheme, one part of the required constellations is created by the first scheme and the other part is obtained by the conventional design. This means that more information bits can be transmitted by the new constellations. According to their special construction, two corresponding decoding algorithms are proposed with low complexity in flat fading channel, respectively. At the same time, the probability of miss detection is deduced for the decoding algorithms. Performance analysis and simulation results show that the proposed constellations outperform the conventional constellations and the proposed decoding algorithms are efficient and simple.

摘要：设计了一种简单的水热合成法合成晶型可控的立方结构的α-Fe2O3,通过扫描电子显微镜,透射电子显微镜,和X射线衍射对所制备产物的结构和形态特征进行了分析。制备的立方结构的α-Fe2O3的尺寸范围在130150 nm之间。研究结果表明,α-Fe2O3纳米材料作为一种有效的光催化剂,在过氧化氢存在的条件下可以用来光催化降解废水中的有机物（如罗丹明B）,这为设计和开发高效率可见光催化剂在去除工业废水中有机染料的应用提供了新的探索和基础。

摘要：An expansion procedure to design partially decentralized controllers via model predictive control is proposed in this paper. Partially decentralized control is a control structure that lies between a fully decentralized structure and a fully centralized one, and has the advantage of achieving comparable performance as a fully centralized controller but with simpler structure. The proposed method follows the expansion method proposed in a previous paper where internal model control (IMC) was used to design controllers for non-square subsystems. The method requires computing the pseudo-inverse of a non-square matrix via pseudo-inverse factors. Instead, the proposed method uses dynamic matrix control (DMC) to design PID controllers for non-square subsystems without using additional factors. The effectiveness of the proposed method is demonstrated on several chemical examples. Simulation results show that the proposed method is simple and can achieve better performance.

摘要：Aqueous zinc-ion batteries(AZIBs)are attracting worldwide attention due to their multiple merits such as extreme safety,low cost,feasible assembly,and environmentally friendly enabled by water-based *** present,AZIBs have experienced systematic advances in battery components including cathode,anode,and electrolyte,whereas research involving separators is *** separator is the crucial component of AZIBs through providing ion transport,forming contact with electrodes,serving as a container for electrolyte,and ensuring the efficient battery *** this great yet ignored significance,it is timely to present the latest advances in design strategies,the systematic classification and summary of *** summarize the separator optimization strategies mainly along two approaches including the modification of the frequently used glass fiber and the exploitation of new *** advantages and disadvantages of the two strategies are analyzed from the material types and the characteristics of different *** effects and mechanisms of various materials on regulating the uniform migration and deposition of Zn2+,balancing the excessively concentrated nucleation points,inhibiting the growth of dendrites,and the occurrence of side reactions were discussed using confinement,electric field regulation,ion interaction force,desolvation,***,potential directions for further improvement and development of AZIBs separators are proposed,aiming at providing helpful guidance for this booming field.

摘要：TiO_(2)-based materials have been considered as one of most promising alternatives for high-performance Li(Na)-ion batteries because of the low cost,simple composition,easy synthesis,good environmental protection,excellent safety and relatively high specific ***,the inferior electronic conductivity and poor ion diffusion coefficients are the biggest bottlenecks that restrict the popular *** effort has been focused on resolving these problems toward large-scale applications,and numerous significant advances have been *** the present work,a comprehensive overview of structure characteristics,electrochemical reaction mechanism and modification strategies of TiO_(2)-based materials was *** recent advances of various efficient ways for improving conductivity,Li(Na)storage capacity,rate capability and cycle stability are systematically summarized,including surface engineering,constructing composite and element doping,*** TiO_(2)-based materials with novel porous heterogeneous core-shell structures have been regarded as one of the most effective ways to resolve these ***,the future research directions and development prospects of TiO_(2)-based anode materials used in the manufacture of high-performance Li(Na)-ion batteries are *** review can provide important comprehension for the construction and optimization of highperformance of TiO_(2)-based anode materials.

摘要：The martensitic transformation,mechanical,and magnetic properties of the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) (x=0.125,0.25,0.375,0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5)[(x=0.125,y=0.125,0.25,0.375,0.5) and (x=0.125,0.25,0.375,y=0.625)]alloys were systematically studied by the first-principles *** the formation energy,the martensite is smaller than the austenite,the Ni–(Co)–Mn–Cu–Ti alloys studied in this work can undergo martensitic *** austenite and non-modulated (NM) martensite always present antiferromagnetic state in the Ni_(2)Mn_(1.5-x)Cu_(x)Ti_(0.5) and Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) (y<0.625) *** y=0.625 in the Ni_(2-y)Co_(y)Mn_(1.5-x)Cu_(x)Ti_(0.5) series,the austenite presents ferromagnetic state while the NM martensite shows antiferromagnetic *** doping can decrease the thermal hysteresis and anisotropy of the Ni–(Co)–Mn–Ti *** Mn and decreasing Ti content can improve the shear resistance and normal stress resistance,but reduce the toughness in the Ni–Mn–Cu–Ti *** the ductility of the Co–Cu co-doping alloy is inferior to that of the Ni–Mn–Cu–Ti and Ni–Co–Mn–Ti *** electronic density of states was studied to reveal the essence of the mechanical and magnetic properties.

摘要：A series of zwitterionic‐type quaternary ammoniums(ZTQAs)with varying lengths of alkyl chains combined with KI were synthesized and considered as catalysts for the coupling reaction of CO2 and various terminal *** prolonged alkyl chain of ZTQAs exhibited temperature‐responsive self‐separation in propylene carbonate(PC).The interaction between ZTQAs and KI was confirmed by X‐ray photoelectron spectroscopy and quantum chemical *** interaction strengthened the nucleophilicity of the I?ion,favoring the catalytic *** 3‐(dimethyltetradecylammonium)propane sulfonate(DTPS)/KI showed an excellent yield of PC(95.1%)at 125°C,1.5 MPa,and 1 mol%loading of *** precipitate formed spontaneously from the catalytic system,providing high catalytic activity of the homogeneous catalyst,as well as easy recovery of the heterogeneous catalyst.

摘要：In this paper, we merge software trustworthiness with software design and present an approach to trustworthy software design with an automatically adapting software update. First, software behavior and results can be expected and behavior states can be monitored when a software runs by introducing a trustworthy behavior trace on a software and inserting a checkpoint sensor at each checkpoint of the trustworthy software. Second, an updated approach of the trustworthy behavior trace for the software at the level of checkpoints is presented. The trustworthy behavior traces of the software for two versions can be merged adequately by constructing split points and merge points between two trustworthy behavior traces. Finally, experiments and analyses show that： （1） the software designed by our approach can detect and report the anomaly in a software automatically and effectively, so it has a higher ability of trustworthiness evaluation than the traditional software; and （2） our approach can realize the accurate update of the trustworthy behavior trace with a lower space overhead of checkpoints when the software updates.

摘要：随着环境的恶化和能源危机,太阳能、风能等可持续能源的存储和利用变得迫在眉睫。电化学储能(EES)装置作为有效存储这些新兴能源的手段,受到越来越多的关注。电极材料对EES的性能至关重要,碳基纳米材料因其独特而突出的优势成为极有前途的电极材料。电极材料的结构设计和可控合成决定了EES的电化学性能。围绕碳基纳米材料独特而突出的优势,本文综述和讨论了不同维度碳基材料的研究进展,并介绍了近年来碳基材料在不同储能器件中的应用。这有助于深入理解材料不同维度结构与电化学特性之间的关系,为应用于EES器件性能优异的碳基纳米材料的设计和合成提供了视角和参考。

摘要：设计合成了一系列由碳链长度可调节的Brnsted酸中心阳离子及Lewis碱中心阴离子构成的酸性离子液体,,并应用于二氧化碳与环氧化合物的偶联反应合成环碳酸酯.考察了离子液体结构以及温度、压力和催化剂用量等参数的影响.结果表明,具有长碳链的离子液体表现出高催化活性及可重复使用性能.离子液体的酸性影响催化活性.