摘要：Feedback control is one of the most important ways to improve coiling temperature control precision during laminar cooling *** cooling equipments of a hot strip mill and structure of the control system were *** control algorithm based on PI controller and that based on Smith predictor were designed and tested in a hot strip mill *** application shows that the feedback control system based on PI controller plays a limited role in improving coiling temperature control *** feedback control system based on Smith predictor runs stable and *** the measured coiling temperature deviates from the target value,it can be adjusted to the required range quickly and steadily by Smith predictor feedback control,which improves the coiling temperature control precision greatly,and qualities of hot rolled strips are improved significantly

摘要：In anti-seismic calculation, the mode truncation is a significant problem to engineers if the mode-superposition response spectrum method is used, which has not been completely solved yet in some large and complex structures such as reticulated domes. In this case, some useful advices, concentrating on the problem above, are expected through a careful and comprehensive investigation of this paper. During the investigation, the authors first point out shortcomings of former researches. Then frequency-spectrum characteristics of single-layered reticulated domes were studied from the perspective of structural responses. During this process, some important results such as the existence of the main resonant section, and the fact that the relative sensitivity of these domes under horizontal and vertical impulse varies with the different R/S ratios were achieved. Furthermore, based on the study of frequency-spectrum characteristics, as well as that of earthquake input, reasonable numbers of mode truncation in single layered reticulated domes with different R/S ratio were presented. Results of case studies prove the mode truncation number proposed is valid.

摘要：This paper is concerned with the problems of robust admissibility and static output feedback( SOF)stabilization for a class of discrete-time switched singular systems with norm-bounded parametric *** objective is to design a suitable robust SOF controller guaranteeing the regularity,causality and asymptotic stability of the resulting closed-loop system under arbitrary switching laws. Based on the basic matrix inequality sufficient condition for checking the admissibility of switched singular systems,together with some matrix inequality convexifying techniques,the SOF controller synthesis is developed for the underlying systems. It is shown that the controller gains can be obtained by solving a set of strict linear matrix inequalities( LMIs). A simulation example is given to show the effectiveness of the proposed method.

摘要：The microstructural evolutions of the cold rolled Fe-0.1C-5Mn steel during intercritical annealing were ex- amined using combined advanced techniques. It was demonstrated that intercritical annealing results in an ultrafine granular ferrite and austenite duplex structure in cold rolled 0.1C-5Mn steel. The strong partitioning of manganese and carbon elements from ferrite to austenite was found during intercritical annealing by scanning transmission elec- tron microscopy （STEM） and X-ray diffraction （XRD）. Strong effects of boundary characters on the austenite for- mation were indicated by austenite fast nucleation and growth in the high angle boundaries but sluggish nucleation and growth in the low angle boundaries. The ultrafine grained duplex structure in 0.1C-5Mn was resulted from the the sluggish Mn-diffusion and the extra high Gibbs free energy of ferrite phase. Based on the analysis of the micro- structure evolution, it was pointed out that the intercritical annealing of the medium Mn steels could be applied to fabricate an ultrafine duplex grained microstructure, which would be a promising approach to develop the 3rd genera- tion austomobile steels with excellent combination of strength and ductility.

摘要：This study firstly defines a set of arrangement rule for perforated holes of multi-hole orifice(MO), and then presents three critical geometrical parameters including total number of performated hole, equivalent diameter ratio and distribution density of perforated holes, which are to quantify MO structure. This paper built the throttling test apparatus for nice test MO plates, which were designed according to orthogonal theory. The experiments were conducted to investigate the effect of three critical geometerical parameters on the pressure loss coefficient of test MOs. Results show that equivalent diameter ratio is the dominant prameter affecting MO throttling characterstic.

摘要：The IEEE 802. 16 standard specifies the air interface of wireless metropolitan area network （WMAN）, and aims to provide wireless broadband access for integrated voice and video services. This paper presents the efficient design and implementation of fast Frouier transform （FFT） and inverse fast Frouier transform （IFFT） for the application in IEEE 802. 16d orthogoual frequency division multiplexing （OFDM） system. In this design, a novel pipeline structure for the branch of butterfly unit （BU） is proposed, which can improve the processing symbol rate by adding the number of branch flexibly. The symmetrical ping-pang structure of random access memory （RAM） is performed to increase the system throughput. Simulation results reveal that only with 1 branch of BU, the proposed FFF/IFFT design can almost achieve the maximum bandwidth requirement of IEEE 802. 16d OFDM system. And this design has been verified by FPGA and successfully implemented in the prototype of WiMAX transceiver.

摘要：To better remove the contamination on the surface of a heat-exchanger in urban sewage source heat pump system （USSHPS）, this paper analyzes the feasibility of strong self-flushing on the basis of experiments and presents a new on-line self-flushing technique, which alternately flushes part of heat transfer tubes. In addition, operation principles and the structure of the new heat-exchanger are introduced and the feasible economi- cal and technological cleaning plans are given by design calculation and scheme comparison. The result shows that keeping each tube washed for one minute with 5 m/s, the operating cost is lower than ￥5 and when one flushing pump ahemately flushes 10-20 heat exchangers, the saved costs of flushing 10 tubes alternately are over 4 times of the increased costs.

摘要：An optimum design model has been proposed for carbon/carbon ablative property based on genetic algorithm,in which the optimum parameters are the number of woven satins,K of fiber bundles,layers per unit height,the average distance of puncture fibers in Z direction and Ply Stacking angle,and the constraint conditions are the density and diameter of carbon fibers and the density of carbon *** results demonstrate that after optimization,the overall height of the ablative carbon/carbon surface is reduced by 56.5%,the standard deviation is reduced by 34.9% and the surface roughness is reduced by 12.6%,which suggests the remarkable improvement of ablative *** present investigation can provide practical methodology for the optimum design of carbon/carbon ablative property and the development of new carbon/carbon composites.

摘要：A successful mechanical property data-driven prediction model is the core of the optimal design of hot rolling process for hot-rolled strips. However, the original industrial data, usually unbalanced, are inevitably mixed with fluctuant and abnormal values. Models established on the basis of the data without data processing can cause misleading results, which cannot be used for the optimal design of hot rolling process. Thus, a method of industrial data processing of C-Mn steel was proposed based on the data analysis. The Bayesian neural network was employed to establish the reliable mechanical property prediction models for the optimal design of hot rolling process. By using the multi-objective optimization algorithm and considering the individual requirements of costumers and the constraints of the equipment, the optimal design of hot rolling process was successfully applied to the rolling process design for Q345B steel with 0.017% Nb and 0.046% Ti content removed. The optimal process design results were in good agreement with the industrial trials results, which verify the effectiveness of the optimal design of hot rolling process.

摘要：In the paper, the gas-liquid two-phase flow performance and desulfurisation performance of the gas-liquid screen scrubber were experimentally studied when limestone was used as absorbent. Experiments were carried out at varying the flue gas velocity and slurry flux in concurrent and countercurrent tower respectively. The experimental results showed that the flow resistance of absorber increased rapidly with an increase of the flue gas velocity whether in concurrent or in countereurrent tower, and the up trend of the flow resistance in the cotmtercurrent tower was higher than those in the concurrent one. The influence of the flue gas velocity on the flow resistance of absorber was more than those of the slurry flux density. Whether in the concurrent tower or in the cotmtercurrent one, increasing the flue gas velocity or the slurry flux density would enhance the desulphurization efficiency. The influence of the slurry flux density on the desulfurisation efficiency was greater than those of the flue gas velocity.