摘要：A kind of erbium doped photosensitive fiber(EDPF) was proposed and fabricated,whose core was made of double layers named photosensitive layer and erbium doped *** double-layer core de-sign can overcome difficulties in fabrication of EDPF with single core design,*** conflict between the high consistency rare earth doping and high consistency germanium doping.A sample was fabri-cated through the modified chemical vapor deposition method combined with solution doping *** peak absorption coefficient was 48.80 dB/m at 1.53 μm,the background loss was lower than 0.1 dB/m,and the reflectivity of the fiber Brag gratings(FBG) written directly on the sample fiber was up to 97.3% by UV-writing ***,a C band tunable fiber laser was fabricated using the sample fiber,in which a uniform FBG was written directly on EDPFs as a reflector.A single wavelength lasing with a maximum wavelength tuning range of 1555.2―1558.0 nm was achieved *** this tuning range,the full-width at half maximum(FWHM) of the laser output was smaller than 0.015 nm and the side mode suppression ratio(SMSR) was better than 50 dB.

摘要：As a core part of subsea production systems,subsea control modules(SCMs)are costly,difficult,and expensive to install and inconvenient to use in underwater ***,performance and function tests must be carried out before launching *** study developed a testing device and an SCM test by investigating SCMs and their *** testing device includes four parts:a hydraulic station,an SCM test stand,a signal generating device,and an electronic test ***,the basic indices of the testing device were determined from the performance and working parameters of the ***,the design scheme of the testing device for the SCM was tentatively proposed,and each testing device was ***,a practical measurement of the SCM,in combination with the hydraulic station,SCM test stand,signal generator,electronic unit,and highpressure water tank,was carried out according to the test *** measurement mainly involved equipment inspection before testing and an experimental test for the *** validity and feasibility of the testing device and method were simultaneously verified through an association test.

摘要：主要研究特高压示范工程南部落点的协调电压控制问题。设计并开发潮流仿真平台,能模拟电网无功电压调节的准稳态过程,并兼顾电网安全约束和特高压线路绝缘要求。基于仿真平台,对比研究了独立控制和协调控制两种模式,并综合利用发电机进相、直流降压运行、停运500kV线路等各种调节手段,对三峡近区电网的电压控制进行了全过程仿真,分析了影响特高压线路落点变电站电压下降的关键因素。

摘要：This paper describes the design for testability （DFT） challenges and techniques of Godson-3 microprocessor, which is a scalable multicore processor based on the scalable mesh of crossbar （SMOC） on-chip network and targets high-end applications. Advanced techniques are adopted to make the DFT design scalable and achieve low-power and low-cost test with limited IO resources. To achieve a scalable and flexible test access, a highly elaborate test access mechanism （TAM） is implemented to support multiple test instructions and test modes. Taking advantage of multiple identical cores embedding in the processor, scan partition and on-chip comparisons are employed to reduce test power and test time. Test compression technique is also utilized to decrease test time. To further reduce test power, clock controlling logics are designed with ability to turn off clocks of non-testing partitions. In addition, scan collars of CACHEs are designed to perform functional test with low-speed ATE for speed-binning purposes, which poses low complexity and has good correlation results.

摘要：目的:研究治疗获得性免疫缺陷综合症药物raltegravir的合成工艺。方法:经过成氨基腈,苄氧羰基保护氨基,从腈成氨肟,环合成二羟基嘧啶,氮甲基化,微波催化成酰胺,脱保护,再经酰化缩合成酰胺等8步反应制备raltegravir。结果:经过对合成工艺的改进得到了目标产物,其结构经1H NMR,13C NMR,LR-MS和HR-MS确证,总收率为12.0%。结论:此方法原料易得、操作简单、成本低。

摘要：介绍了用DFB型可调谐半导体激光器做光源的腔增强吸收光谱(TDL-CEAS)技术.简要介绍了腔增强吸收光谱的发展和实验设计,从法布里-珀罗腔的角度解释了腔增强吸收光谱的有效吸收路径,阐述了腔增强吸收光谱具有高灵敏度的主要原因是腔内介质能够获得很长的吸收光程;用中心波长为1.573μm的DFB型可调谐近红外半导体激光器做光源,用两块高反射率平凹透镜(1.573μm附近,反射率约99.4%,凹面曲率半径为1 m)组成的光学谐振腔做吸收池,采用同时扫描激光和谐振腔的方法,在34 cm长的吸收池内测得了CO2分子在1.573μm附近的弱吸收谱线,探测灵敏度达1.66×10-5cm-1.实验结果表明,腔增强吸收光谱具有灵敏度高、分辨率高、实验装置简单、易于操作等优点.

摘要：SU-8负胶具有优异的力学性能、抗化学腐蚀性、热稳定性和生物兼容性,在MEMS工艺和器件中得到广泛应用。镍金属具有良好的力学性能和抗腐蚀性,因此常用来制作MEMS器件。在MEMS执行器中,弹性元件常采用电铸镍制作。SU-8经过经曝光显影后形成致密的交联网络结构是一种高分子聚合物,这种聚合物非常稳定,不溶于强酸强碱及常见的有机溶剂,尤其是在电铸金属结构后的SU-8胶的去除更为困难。目前的SU-8去胶技术,按去胶原理可分:机械物理去胶技术和氧化去胶技术。氧化去胶技术可以有效去除SU-8胶,但氧化去胶方法不同程度地损坏电铸金属,使其力学性能与去胶前相比发生显著的变化。因此需要研究去胶对Ni金属弹性模量的影响,从而为执行机构设计提供准确的基本数据。针对目前运用比较普遍的两种去除SU-8胶方式:微波等离子下游化学刻蚀和强碱熔盐浴,分别进行了去胶实验,对去胶前后的电铸Ni金属进行了弹性模量和硬度测试。实验结果表明,电铸镍的杨氏模量在经过微波等离子下游化学刻蚀后下降18%,而经过强碱熔盐浴后下降36%,但硬度下降不明显。

摘要：Cosmic radiation has several effects on the On-Board Processing(OBP)platform in satellite communications systems,and Single Event Upsets(SEUs)are one of its most important *** order to protect the Finite Impulse Response(FIR)filters against SEU,this paper proposes a novel Residue Number(RN)-based *** proposed method applies the transpose form of the FIR filter to avoid the fault missing caused by SEU on shift *** also adjusts the input intelligently to avoid the fault missing caused by SEU on the filter *** all the fault missing events are avoided,the modulus can be minimised to achieve the minimum *** analysis and simulation results show that the noise introduced by the input adjustment is *** injection shows that the fault missing rate of the proposed method is ***,FPGA implementation shows that the overhead of the proposed method is approximately 75% of Triple Modular Redundancy,and is only 1%-2% higher than that of the traditional RN-based design.

摘要：【目的】黄曲霉毒素氧化酶(aflatoxin-oxidase,AFO)来源于假蜜环菌(Armillariella tabescens)的细胞内提取物,具有转化黄曲霉毒素B1(Aflatoxin B1,AFB1)的特性。为更进一步了解该酶的性质,我们克隆了AFO的基因,并进行了重组AFO蛋白的表达、纯化和酶学性质分析。【方法】本研究利用基质辅助激光解吸飞行时间质谱(MALDI-TOF-MS)获得的AFO短肽序列设计简并引物进行逆转录,再通过cDNA末端快速扩增(rapid-amplification of cDNA ends,RACE)技术获得了AFO基因的全长cDNA序列。构建重组表达载体pPIC9-afo,在毕赤酵母中进行重组AFO(rAFO)的融合分泌表达,用Ni离子螯合层析进行rAFO的纯化,获得有活性的rAFO后,对其进行肽质量指纹(peptide mass fingerprinting,PMF)鉴定和酶学性质分析。【结果】黄曲霉毒素氧化酶(AFO)基因的开放阅读框为2088 bp,编码695个氨基酸;肽质量指纹鉴定结果显示重组AFO的肽片段序列覆盖率为63.2%。活性测定表明纯化后的重组AFO(rAFO)比活力为234 U/mg;对rAFO进行酶学性质分析表明,对于底物黄曲霉毒素B1,rAFO的Km值为3.93±0.20×10-6 mol/L;反应最适温度为30℃,最适pH为6.0;30℃放置90 min后酶活力下降50%;rAFO在pH5.5-7.0之间酶活力较稳定,相对活力维持在51%-65%之间。【结论】本文第一次成功克隆并重组表达了一种具有黄曲霉毒素B1转化功能的酶——黄曲霉毒素氧化酶(aflatoxin-oxidase,AFO),纯化后的重组AFO(rAFO)具有较好的黄曲霉毒素B1转化活性,为进一步研究和应用奠定了基础。

摘要：The performance of a joint data assimilation system（Tan-Tracker）,which is based on the PODEn4 Dvar assimilation method,in assimilating Greenhouse gases Observing SATellite（GOSAT） carbon dioxide（CO2） data,was *** 3D CO2 concentrations and CO2 surface fluxes（CFs） from2010 were simulated using a global chemistry transport model（GEOS-Chem）.TheTan-Tracker system used the simulated CO2 concentrations and fluxes as a background field and assimilated the GOSAT column average dry-air mole fraction of CO2（X（CO2）） data to optimize CO2 concentrations and CFs in the same assimilation *** simulated X（CO2）（X（CO2）Sim）） and assimilated X（CO2）（X（CO2）,TT） data retrieved at different satellite scan positions were compared with GOSAT-observed X（CO2）（X（CO2）,obs）*** average RMSE between the monthly X（CO2）,TT and X（CO2）,Obs data was significantly（30%） lower than the average RMSE between X（CO2）,Sim and X（CO2）,Obs）.Specifically,reductions in error were found for the positions of northern Africa（the Sahara）,the Indian peninsula,southern Africa,southern North America,and western *** difference between the correlation coefficients of the X（CO2）,Sim）and X（CO2）,Obs and those of the X（CO2）Π）,TT and X（CO2）,Obs was only *** general,the Tan-Tracker system performed very well after assimilating the GOSAT data.