摘要：An optimal drainage tunnel location determination method for landslide prevention was proposed to solve the existing problems in drainage tunnel construction. Current applications of drainage tunnel systems in china were reviewed and the fimctions of drainage tunnel were categorized as catchment and interception. Numerical simulations were conducted. The results show that both catchment and interception tunnels have variation of the function in the simulation of monolayer model, which shows the reduction of permeability condition in lower layer. The function of catchment can be observed in the deep slope, while the function of interception is observed near groundwater source. By using the slope safety factor and discharge water amount as the objectives of optimal drainage tunnel location, and pore-water pressure in fixed node and section flux as the judgment for construction quality of adjacent drainage tunnel, the design principle of drainage tunnel was introduced. The K103 Landslide was illustrated as an example to determine the optimal drainage tunnel location. The measured drainage tunnel efficiency was evaluated and compared with that from the numerical analyses based on groundwater data. The results validate the present numerical study.

摘要：In order to reveal the changing law of the mechanical response of asphalt pavements under the action of vehicle load and provide references for the design of durable pavements,three typical asphalt pavement structures with flexible base(S1),combined base(S2),and semi-rigid base(S3)were selected to perform field strain tests under static and dynamic load using the fiber Bragg grating optical sensing *** changing characteristics of the strain field along the horizontal and depth directions of pavements were *** results indicate that the most unfavorable asphalt pavement layers were the upper-middle surface layer and the lower base *** addition,the most unfavorable loading positions on the surface layer and the base layer were the center of wheel load and the gap center between two wheels,*** most unfavorable layer of the surface layers gradually moved from the lower layer to the upper layer with the increase of base layer *** power function relationships between structural layer strain and vehicle speed were *** semi-rigid base asphalt pavement was the most durable pavement type,since its strain value was lower compared to those of the other structures.

摘要：The radial force is a critical factor to determine the sealing performance of radial lip *** effects of radial force produced by garter spring and interference on the static contact properties and sealing performance of a radial lip seal are investigated by numerical simulations and ***-element analysis and mixed elastohydrodynamic lubrication simulation are *** force,contact width,temperature in the sealing zone,the reverse pumping rate and friction torque are measured.A critical value of interference for a cost-effectively designed radial lip seal is *** force is required to compensate the decrease of the radial force because of the interference and used as a possible way to obtain intelligent control of sealing *** quantitative results gotten in this study could provide guide for the seal design and improvement.

摘要：Rational protein design is a powerful strategy,not only for revealing the structure and function relationship of natural metalloproteins,but also for creating artificial metalloproteins with improved properties and ***(Mb),a small heme protein created by nature with diverse functions,has been shown to be an ideal scaffold for rational protein *** progress reviewed herein includes fine-tuning its native functions of O2binding and transport,peroxidase activity and nitrite reductase(NIR)activity,and rational expanding its functionalities to peroxygenase,heme-copper oxidase(HCO),nitric oxide reductase(NOR),as well as hydroxylamine *** studies have enhanced our understanding of how metalloproteins work in nature,and provided insights for rational design of functional metalloproteins for practical applications in the future.

摘要：We propose an efficient and robust way to design absorbing boundary conditions in atomistic computations. An optimal discrete boundary condition is obtained by minimizing a functional of a reflection coefficient integral over a range of wave numbers. The minimization is performed with respect to a set of wave numbers, at which transparent absorption is reached. Compared with the optimization with respect to the boundary condition coefficients suggested by E and Huang [Phys. Rev. Lett. 87 （2001） 133501], we reduce considerably the number of independent variables and the computing cost. We further demonstrate with numerical examples that both the optimization and the wave absorption are more robust in the proposed design.

摘要：Four optimal approaches of high-order finite-impulse response(FIR) digital filters were developed for designing four types filters using neural network algorithms. The solutions were presented as parallel algorithms to approximate the desired frequency response specification. Therefore, these methods avoid matrix inversion, and make a fast calculation of the filter’s coefficients possible. The convergence theorems of these proposed algorithms were presented and proved to illustrate them stable, and the implementation of these methods was described together with some design guidelines. The simulation results show that the ripples of the designed FIR filters are significantly little in the pass-band and stop-band, and the proposed algorithms are of fast convergence.

摘要：Systems that are subject to both time-delay in state and input saturation are considered. We synthesize the anti-windup gain to enlarge the estimation of domain of attraction while guaranteeing the stability of the closed-loop system. An ellipsoid and a polyhedral set are used to bound the state of the system, which make a new sector condition valid. Other than an iterative algorithm, a direct designing algorithm is derived to compute the anti-windup compensator gain, which reduces the conservatism greatly. We analyze the delay-independent and delay-dependent cases, respectively. Finally, an optimization algorithm in the form of LMIs is constructed to compute the compensator gain which maximizes the estimation of domain of attraction. Numerical examples are presented to demonstrate the effectiveness of our approach.

摘要：The exact solution for the bending problem of a free-end point loaded film- substrate cantilever with arbitrary film-to-substrate thickness ratio is obtained by using the basic mechanical equilibrium equation. And then the problem of design and optimization for microactuator buildup of film-substrate cantilever is discussed by taking into account the effect of geometrical and physical parameters of the cantilever components. Furthermore, the optimal condition for actuator application is presented and some theoretical problems are clarified. The results show that, in general, the greater the film-to-substrate thickness ratio, the higher the ability of taking load, namely the larger the exerted force of the cantilever when the thickness of substrate is kept constant. When the total thickness of the cantilever is kept constant, however, the free-end exerted force will experience a maximum and this maximum value of the exerted force will decrease with the increasing film-to-sub- strate stiffness ratio. Meanwhile, the optimal thickness ratio corresponding to this maximum exerted force also decreases with the increasing stiffness ratio. Whether for the cases of fixed substrate or fixed total thickness, the influence of Poisson’s ratio of two cantilever components on the exerted force is remarkable, and should not be neglected.

摘要：Recently the content centric networks(CCNs) have been advocated as a new solution to design future networks. In the CCNs, content and its interest are delivered over the content store and pending interest table, respectively, where both have limited capacities. Therefore, how to design the corresponding algorithms to efficiently deliver content and inertest over them becomes an important issue. In this paper, based on the analysis of content distribution, status of content store, and pending interest, we propose a novel caching algorithm with which the resources of content store and pending interest table can be efficiently used. Simulation results prove that the proposal can outperform the conventional methods.

摘要：A novel composite ultraviolet(UV)/blue photodetector is proposed in this *** ring-shaped PN junction is used to separate photogenerated carriers and inject the non-equilibrium excess carriers to the bulk,changing the bulk potential and shifting the threshold voltage of the metal-oxide-semiconductor field-effect transistor(MOSFET)as well as the drain *** simulation is carried out,and the simulation results show that the composite photodetector has the enhanced responsivity for UV/blue *** exhibits very high sensitivity to weak and especially ultra-weak light.A responsivity of 7000 A/W is obtained when the photodetector is illuminated under incident optical power of 0.01μ*** a result,this proposed combined photodetector has great potential for UV/blue and ultra-weak light applications.