摘要：Prosthesis implantation and fat transplantation are common breast *** general,prosthesis implantation alone does not achieve a realistic enough appearance,and fat transplantation alone is difficult to achieve in the correct *** date,no reports have focused on methods of combining fat with implanted prostheses for breast *** a newly designed bionic ink(i.e.,polyether F127 diacrylate(F127DA)&poly(ethylene glycol)diacrylate(PEGDA))and projection-based three-dimensional bioprinting(PBP),we report the development of a new method for printing porous *** was used to improve the printing precision of the prosthesis by increasing the gel point of F127DA and reducing the impact of external *** compression modulus of the printed prosthesis was very close to that of prostheses currently used in clinical practice and to that of natural ***,stromal vascular fraction gel(SVF-gel),a human fat extract,was injected into the pores of the synthesized prostheses to prepare a prosthesis mixed with adipose *** were implanted subcutaneously in nude mice to observe their biological *** 14 and 28 days of observation,the prosthesis showed good biocompatibility,and adipose tissues grew well in and around the *** result shows that a porous prosthesis containing pre-placed adipose tissues is a promising breast reconstruction material.

摘要：Metabolites play important roles in numerous cell biology processes,such as cell proliferation,differentiation,stress response,and cell death[1].Recently,lactate and lactate-derived lysine residue lactylation(Kla)have emerged as newly discovered epigenetic modifications that play critical roles in various physiological and pathological *** the history of lactate research,we can categorize the studies into three mile stones(Fig.S1 online).

摘要：The NiS/CQDs nanocomposite (CQDs represents carbon quantum dots), with a mass ratio of NiS/CQDs to be 1.19:1 based on the ICP result, was obtained via a facile hydrothermal method from a mixture of CQDs, Ni(OAc)2 and Na2S. The self-assembly of ZnIn2S4 microspheres on the surface of NiS/CQDs was realized under microwave conditions to obtain a ternary NiS/CQDs/ZnIn2S4 nanocomposite. The as-obtained NiS/CQDs/ZnIn2S4 nanocomposite was fully characterized, and its photocatalytic hydrogen evolution under visible light irradiation was investigated. The ternary NiS/CQDs/ZnIn2S4 nanocomposite showed superior photocatalytic activity for hydrogen evolution than ternary CQDs/NiS/ZnIn2S4, which was obtained by deposition of NiS in the preformed CQDs/ZnIn2S4. The superior photocatalytic performance of ternary NiS/CQDs/ZnIn2S4 is ascribed to the introduction of CQDs, which act as a bridge to promote the vectorial transfer of photo-generated electrons from ZnIn2S4 to NiS. This result suggests that the rational design and fabrication of ternary CQDs-based systems are important for the efficient photocatalytic hydrogen evolution. This study provides a strategy for developing highly efficient noble-metal-free photocatalysts for hydrogen evolution using CQDs as a bridge to promote the charge transfer in the nanocomposite.

摘要：This paper discusses the methods of establishing risk criteria for dams and reviews the application of dam risk criteria for individuals and societies in different countries or districts. Given the conditions in china and considering the public safety and acceptance of dam risk, historical dam break data and current design standards, individual and societal risk criteria for dams are proposed. The tolerable dam risk criteria for individuals should be set to 10-5-10-7 per annum based on project scale, for ex- ample, approximately 1.0xl0 7 per annum, which corresponds to a reliability index of 4.2 based on a 100-year lifespan for a first-class or large project. The societal limit for risk tolerance for dams should be set to approximately 10-3-10-5 per annum, corresponding to the fatality range from 1 to 100 and be horizontally extended to 1000, and F-N curves are proposed. It was also found that the reliability indices of Chinese Standard （GB 50199-2013） and Eurocodel （2002） are different, but they have the same level of safety measured by the annual probability of failure. The research results have significance for establishing dam risk criteria.

摘要：Organic Rankine Cycles(ORCs) are an effective way to produce electricity from low-grade heat sources, which cannot be effectively obtained using conventional high-temperature Rankine cycles. Due to the lack of available information regarding the real Organic Rankine Cycle units on industrial level, off-design simulation under diversified operating conditions plays a significant role for both the system performance prediction and control strategy design. This paper summarizes the theoretical basis, modeling approaches and tools for ORC off-design simulations. Firstly, a review was conducted on the individual state-of-the-art convective heat transfer correlations and void fraction models. Secondly, different kinds of modeling approaches and simulation tools were proposed, highlighting their relevant characteristics, and were categorized for their specific applications. Moreover, an in-depth analysis of technical challenges related to various applications and focusing on the model accuracy and complexity, computational efficiency, as well as the model compatibility were extensively described and discussed. Finally, the current research trends in this field and the development for further investigations were presented.

摘要：Tandem electrocatalysis is an emerging concept for effective electrochemical CO_(2) reduction reaction(CO_(2)RR)towards multicarbons(C_(2+)).This decouples the multiple steps of CO_(2)-to-C_(2+)into two steps of CO_(2)-to-CO and CO-to-C_(2+)catalyzed by individual catalysts,to improve the Faradic efficiency(FE).However,due to the mass-transport limitation of CO from the generation site to the long-distance consumption site,such a strategy still remains challenge for high-rate production of C_(2+)***,we designed CuO/Ni single atoms tandem catalyst,which made the catalytic sites of Ni and Cu for independently catalyzing CO_(2)-to-CO and CO-to-C_(2+)compactly neighbored,enabling the in-situ generation and rapid consumption of *** CuO/Ni SAs tandem catalyst achieved a particularly high partial current density of C_(2+)products(1220.8 mA/cm^(2)),while still maintained outstanding C_(2+)products FE(81.4%)and excellent selectivities towards ethylene(FE 54.1%)and ethanol(FE 28.8%),enabling the profitable production of multicarbons by CO_(2)RR.

摘要：How to increase strength without sacrificing ductility has been developed as a key goal in the manufacture of high-performance metals or alloys. Herein, the double-nanophase intragranular yttrium oxide dispersion strengthened iron alloy with high strength and appreciable ductility was fabricated by solution combustion route and subsequent spark plasma sintering, and the influences of yttrium oxide content and sintering temperature on microstructures and mechanical properties were investigated. The results show at the same sintering temperature,with the increase of yttrium oxide content, the relative density of the sintered alloy decreases and the strength increases. For Fe–2wt%Y_(2)O_(3)alloy, as the sintering temperature increases gradually, the compressive strength decreases, while the strain-to-failure increases. The Fe–2wt%Y_(2)O_(3)alloy with 15.5 nm Y_(2)O_(3)particles uniformly distributed into the 147.5 nm iron grain interior sintered at 650℃ presents a high ultimate compressive strength of 1.86 GPa and large strain-to-failure of 29%. The grain boundary strengthening and intragranular second-phase particle dispersion strengthening are the main dominant mechanisms to enhance the mechanical properties of the alloy.

摘要：Two new binary near-azeotropic mixtures named M1 and M2 were developed as the refrigerants of the high-temperature heat pump(HTHP).The experimental research was used to analyze and compare the performance of M1 and M2-based in the HTHP in different running *** results demonstrated the feasibility and reliability of M1 and M2 as new high-temperature ***,the exploration and analyses of the support vector machine(SVM)and back propagation(BP)neural network models were made to find a practical way to predict the performance of HTHP *** results showed that SVM-Linear,SVM-RBF and BP models shared the similar ability to predict the heat capacity and power input with high ***-RBF demonstrated better stability for coefficient of performance ***,the proposed SVM model was used to assess the potential of the M1 and *** results indicated that the HTHP system using M1 could produce heat at the temperature of 130°C with good performance.

摘要：高熵合金近年来在电催化领域广受关注.由于其四大“核心效应”,即高熵效应、晶格畸变效应、迟滞扩散效应和鸡尾酒效应,高熵合金在诸多电催化反应中展现出了优异的活性和选择性.然而在已报道的文献综述中,有关其优异性能的理解以及合理设计的系统性总结仍然具有局限性.本文不仅综述了高熵合金电催化剂的特点和设计准则,还对其应用的最新进展进行了系统性的归纳整理,对高熵合金未来的发展具有指导意义.首先我们从多个角度阐明了高熵合金作为一种优异电催化剂的原因,包括其出色的机械性能、可优化的结构和组成、大量具有高本征活性的活性位点,以及出色的稳定性.为了进一步深入对高熵合金电催化剂的理解,我们还从设计准则、元素选择,以及理论计算预测材料性质等角度,详细介绍了高熵合金的合理设计.随后,我们介绍了高熵合金电催化剂在电解水、有机小分子氧化、燃料电池和碳/氮基转化反应的最新研究进展,其中还包括了一系列理论计算和原位表征在理解催化反应机理方面的应用.最后,我们展望了高熵合金电催化剂在未来发展中面临的挑战和机遇.

摘要：It is necessary to reduce hydrogen consumption to meet increasingly strict environmental and product-quality regulations for refinery plants. In this paper, the concentration potential concepts proposed for design of water-using networks are extended to synthesis of hydrogen networks with multiple contaminants. In the design procedure, the precedence of processes is determined by the values of concentration potential of *** usage of complementary source pair(s) to reduce utility consumption is investigated. Three case studies are presented to illustrate the effectiveness of the method. It is shown that the design procedure has clear engineering meaning.