摘要：Bending deformation behaviors of solution treated(ST),natural aged(NA)and T6tempered6063aluminum alloy sheetswere studied by three-point bending *** changes of bending force,interior angle,bending radius and sheet thickness in thefillet region were analyzed by experimental measurements and numerical *** results showed that the bendingcharacteristics were strongly dependent on the heat treatment *** T6alloy sheets were bent more sharply and localplastic deformation occurred severely in the fillet ***,the ST and NA alloy sheets exhibited relatively uniform bendingdeformation and large bending *** bending force of T6alloy was the highest,followed by the NA alloy and that of the STalloy was *** unloading,as compared with the ST and NA alloys,the springback of T6alloys was markedly *** time showed a positive sensitivity on the springback and non-uniform bending *** bending characteristics areattributed to the combined effects of yield strength,yield ratio and coefficient of neutral layer.

摘要：To enhance electrochemical performance of li- thium or sodium-ion batteries （LIBs or NIBs）, active materials are usually filled in porous conductive particles to produce anode composites. However, it is still challenging to achieve high performance anode composites with high specific capa- city, excellent rate performance, high initial Coulombic effi- ciency （ICE） and long cycle life. Based on these requirements, we design and fabricate activated carbon-coated carbon na- notubes （AC@CNT） with hierarchical structures containing micro- and meso-pores. A new structure of phosphorus/car- bon composite （P@AC@CNT） is prepared by confining red P in porous carbon through a vaporization-condensation-con- version method. The micro-pores are filled with P, while the meso-pores remain unoccupied, and the pore openings on the particle surface are sealed by P. Due to the unique structure of P@AC@CNT, it displays a high specific capacity of 1674 mA h g-i at 0.2 C, ultrahigh ICE of 92.2%, excellent rate per- formance of 1116 mA h g-i at 6 C, and significantly enhanced cycle stability for LIBs. The application of P@AC@CNT in NIBs is further explored. This method for the fabrication of the special composites with improved electrochemical per- formance can be extended to other energy storage applica- tions.

摘要：A flow control method based on an active jet is developed to restart hypersonic inlets. The dynamic restarting process is numerically reproduced by unsteady Reynolds averaged Navier-Stokes(RANS) modeling to verify the effectiveness and reveal the influence of jet conditions. The active jet improves the inlet unstart status by drawing the high-pressure separation bubble from the internal compression duct and performing a full expansion to alleviate the adverse pressure gradient. Moreover, the favorable pressure gradient in the inlet caused by jet expansion allows for a successful restart after turning off the jet. The influence of the jet momentum ratio is then analyzed to guide the design of the active jet control method and choose the proper momentum ratios. A low jet momentum does not eliminate the high-pressure separation bubble, whereas an excessive jet momentum causes severe momentum loss due to the induced shock. The general rule in restarting the inlet using an active jet is to allow a full jet expansion downstream of the jet slot while avoiding excessive momentum loss upstream and preventing the thick low-speed layer.

摘要：Left-hand materials have drawn increasing attention from many disciplines and found widespread application, especially in microwave engineering. A sandwiched metamaterial consisting of multi-nested square-split-ring resonators on the top side and a set of wires on the back side is proposed. Scattering parameters are retrieved by high-frequency structure simulator(HFSS) software based on the finite element method. Effects of square-split-ring number on the left-hand characteristics containing negative values of permittivity, permeability, and refractive index have been intensively investigated. Simulated results show that obvious resonant left-hand characteristics could be observed within 8-18 GHz, and the resonant frequency counts are inclined to be in direct proportion to the square-split-ring number over 8-18 GHz. Besides, the proposed sandwiched metamaterial with three square-split-ring resonators and three wires presents the widest frequency band of left-hand characteristics in a range of 8-18 GHz. Further, electromagnetic field distributions demonstrated that the induced magnetic dipole dominates the resonant absorption. The multi-peak resonance characteristics of square-split-ring resonant structure are considered to be a promising candidate for selective-frequency absorption or modulation toward microwave frequency band.

摘要：LASP(large-scale atomistic simulation with neural network potential)software developed by our group since 2018 is a powerful platform(***)for performing atomic simulation of complex *** software integrates the neural network(NN)potential technique with the global potential energy surface exploration method,and thus can be utilized widely for structure prediction and reaction mechanism *** we introduce our recent update on the LASP program version 3.0,focusing on the new functionalities including the advanced neuralnetwork training based on the multi-network framework,the newly-introduced S^(7) and S^(8) power type structure descriptor(PTSD).These new functionalities are designed to further improve the accuracy of potentials and accelerate the neural network training for multipleelement *** Cu-C-H-O neural network potential and a heterogeneous catalytic model as the example,we show that these new functionalities can accelerate the training of multi-element neural network potential by using the existing single-network potential as the *** obtained double-network potential Cu CHO is robust in simulation and the introduction of S^(7) and S^(8) PTSDs can reduce the root-mean-square errors of energy by a factor of two.

摘要：An efficient photocatalytic CO_(2) reduction has been reported in ZIF-67-derived-Co nanoparticles(NPs)encapsulated in nitrogen-doped carbon layers(N-C/Co).This work demonstrates that the pyrolysis temperature is crucial in tuning the grain size and components of metallic Co^(0) of N-C/Co composite catalysts,which optimizes their photocatalytic *** were conducted at 600,700,and 800℃ giving the N-C/Co-600,N-C/Co-700,and N-C/Co-800 samples,respectively.N-C layers can well wrap the Co NPs obtained at a low pyrolysis temperature(600℃)owing to their smaller grains than those of other samples.A high metallic Co^(0) content in the N-C/Co-600 sample can be attributed to the effective inhibition of surface *** contrast,the surface CoOx oxides in the N-C/Co-700 and N-C/Co-800 samples cover inside Co cores,inhibiting charge separation and *** a result,the N-C/Co-600 sample yields the best photocatalytic *** carbon monoxide and hydrogen generation rates are as high as 1.62×10^(4) and 2.01×10^(4)μmol g^(−1)h^(−1),***,the Co NPs make composite catalysts magnetic,enabling rapid and facile recovery of catalysts with the assistance of an external magnetic *** work is expected to provide an instructive guideline for designing metal-organic framework-derived carbon/metal composite catalysts.

摘要：Surface topographies such as micrometric edges and grooves have been widely used to improve neuron ***,finding the mechanism of neuron–surface interactions on grooved substrates remains a *** this work,PC12 cells and chick forebrain neurons(CFNs)were cultured on grooved and smooth polyacrylonitrile *** was found that CFNs showed a tendency of growing across groove ridges;while PC12 cells were only observed to grow in the longitudinal direction of *** further investigate these observations,a 3D physical model of axonal outgrowth was *** this model,axon shafts are simulated as elastic 3D beams,accounting for the axon outgrowth as well as the focal contacts between axons and ***,the bending direction of axon tips during groove ridge crossing is governed by the energy minimization *** physical model predicts that axonal groove ridge crossing is contributed by the bending compliance of axons,caused by lower Young’s modulus and smaller *** work will aid the understanding of the mechanisms involved in axonal alignment and elongation of neurons guided by grooved substrates,and the obtained insights can be used to enhance the design of instructive scaffolds for nerve tissue engineering and regeneration applications.

摘要：Charge separation is a crucial problem in *** used a wet‐chemical method to synthesize asymmetrically tipped PdS‐CdSe‐seeded CdS(CdSe@CdS)‐Au nanorod(NR)heterostructures(HCs).In these HCs,electrons and holes are rapidly separated and transported to opposite ends of the NRs by internal electric *** ultraviolet‐visible absorption spectra showed strong electronic coupling between both tips and the CdS ***‐CdSe@CdS‐Au achieved a H2production rate of ca.1100?mol in5h;this is two orders of magnitude greater than the rate achieved with Au‐CdSe@CdS NRs with only one ***‐CdSe@CdS‐Au NRs can withstand4h of photoirradiation,compared to1.5h for CdSe@CdS NRs,indicating that the photostability of PdS‐CdSe@CdS‐Au is much better than that of *** greatly improved photocatalytic activity and stability are attributed to efficient charge separation and rapid charge transport in the PdS‐CdSe@CdS‐Au HCs.

摘要：Structural colors,derived from existing natural creatures,have aroused widespread attention in the materials regulation for different ***,inspired by the color adjusting mechanism of hummingbird,we present a novel shape-memory structural color hydrogel film by introducing shape memory polymers(SMPs)into synthetic inverse opal scaffold *** excellent flexibility as well as the inverse opal structure of the hydrogel films imparts them with stable stretchability and brilliant structural *** from the transient structural anisotropy of copolymers,the hybrid films are possessed with shape-morphing behaviors *** on the shape transformations and color responsiveness performance,we have demonstrated diverse structural color actuators with complex shapes for different ***,as the photothermal responsive graphene quantum dots were integrated into the hydrogel,the hybrid films could also be endowed with the feature of light-controlled reversible deformation with synchronous structural color *** features demonstrate that the presented shape-memory structural color hydrogel film is valuable for soft robotics with multifunctions of sensing,communication and disguise.

摘要：Mg–8Li–3Al–0.7Si alloy was prepared by casting and deformed by hot extrusion in this *** the microstructure of as-cast and extruded specimens was analyzed with OM,XRD,SEM and *** show that the specimens are composed ofα-Mg,β-Li,AlLi,MgLiAl2 and Mg2Si *** as-extruded specimen,the microstructure is refined and theβ-Li phase has the effect of coordination during *** hot extrusion,Chinese script Mg2Si phase is crushed into block-like and distributes uniformly in the *** properties results show that the strength and elongation are both improved after hot extrusion.