摘要：石墨烯因其高载流子迁移率和宽光谱吸收范围而广泛应用于光电探测。然而,其低光吸收率导致的高暗电流严重限制了它的光电探测性能。钼基二硫族化合物(MoX_(2),X=S、Se和Te)具有高的吸收系数,能够弥补石墨烯基光电探测器中暗电流较高的劣势,因此基于石墨烯/MoX_(2)范德华异质结的光电探测器能够表现出优异的光电子特性。本综述首先回顾了光电探测器的工作原理、性能指标和结构。之后,从材料基础的角度突出了石墨烯/MoX_(2)范德华异质结光电探测器的重要性。接着,总结了石墨烯/MoX_(2)范德华异质结光电探测器的制备方法和性能增强策略。最后,强调了这类异质结光电探测器当前面临的挑战及未来的发展方向。本综述将为这类高性能范德华异质结光电探测器的设计提供一定的指导和参考。

摘要：临床上常用的广谱抗生素无法有效解决抗生素高度耐药ESKAPE菌感染的难题,ESKAPE耐药菌已经成为人类生命健康的重大威胁.抗生素与佐剂的联合治疗是解决抗生素耐药菌感染的重要途径,但是探索对所有ESKAPE耐药菌都具有广谱和高效抗菌活性的抗生素-佐剂组合仍然面临巨大挑战.在这里,我们提出了一种抗生素-佐剂的有效设计策略,将对ESKAPE中耐药阴性菌具有高活性的多粘菌素B(PMB)与模拟宿主防御肽的细菌膜靶向阳离子聚(2-噁唑啉)相结合.我们通过2-噁唑啉单体可控聚合,合成了一系列具有不同疏水性侧链的阳离子聚(2-噁唑啉).研究表明,聚(2-噁唑啉)和PMB的组合效果随着聚(2-噁唑啉)侧链疏水性的提高呈现出从拮抗效应到协同效应的逐渐变化.其中,优选的聚(2-噁唑啉)EACA-POX_(20)显著增强了PMB的抗菌活性,尤其是对于ESKAPE耐药阳性菌的抗菌活性增强了16–32倍.聚(2-噁唑啉)EACA-POX_(20)有效增强了PMB的抗菌活性并扩展了PMB的抗菌谱.聚(2-噁唑啉)和PMB的组合策略能够有效对抗所有耐药ESKAPE病原体,为解决ESKAPE耐药菌提供了新的思路.

摘要：Local hydrodynamics of a gas–liquid–solid system,such as bubble circulation regime,gas holdup,liquid velocity and axial profile of solid concentration,are studied in a two-stage internal loop airlift *** correlations for gas holdup and liquid velocity are proposed to ease the reactor design and *** bubble circulation regimes were displayed in the first(lower) and second(upper) *** superficial gas velocity and solid loading can promote regime transition of the second stage,and the gas holdup of the second stage is higher than that of the lower *** addition,the effects of solid loading on bubble behaviour are experimentally investigated for each *** is found that bubble size in the downcomer decreases with the presence of solid particles,and bubble size distribution widens under higher superficial gas velocity and lower solid loading.

摘要：For separating some specific four component mixtures into four products, the four-product dividing wall column(FPDWC) with two partition walls can provide the same utility consumption with the extended Petlyuk configuration, although with structure simplicity. However, the reluctance to implement this kind of four product dividing wall column industrially also consists in the two uncontrollable vapor splits associated with it. The vapor split ratios are set at the design stage and might not be the optimal value for changed feed composition, thus minimum energy consumption could not be ensured. In the present work, a sequential iterative optimization approach was initially employed to determine the parameters of cost-effective FPDWC. Then the effect of maintaining the vapor split ratios at their nominal value on the energy penalty was investigated for the FPDWC with two partition walls, in case of feed composition disturbance. The result shows that no more than + 2% above the optimal energy requirements could be ensured for 20% feed composition disturbances, which is encouraging for industrial implementation.

摘要：It is necessary to reduce hydrogen consumption to meet increasingly strict environmental and product-quality regulations for refinery plants. In this paper, the concentration potential concepts proposed for design of water-using networks are extended to synthesis of hydrogen networks with multiple contaminants. In the design procedure, the precedence of processes is determined by the values of concentration potential of *** usage of complementary source pair(s) to reduce utility consumption is investigated. Three case studies are presented to illustrate the effectiveness of the method. It is shown that the design procedure has clear engineering meaning.

摘要：甲苯是一种最常见的室内有毒挥发性有机物(VOCs),目前消除方法主要有吸附、催化燃烧和光催化氧化,其中光催化是一种最高效和经济可行的方法,能在较温和条件下将甲苯完全矿化为CO_2.作为研究最广泛的光催化剂,TiO_2在应用中通常有锐钛矿(ATiO_2)和金红石(RTiO_2)两种物相,但单物相TiO_2的低量子产率和光生电子-空穴对的快速复合严重限制了它的应用.本文选择兼具锐钛矿和金红石两种物相的P25为催化剂载体,通过负载少量ZnO和构建多组分并具备多通道载流子分离功能的异质结以提高TiO_2基光催化剂的性能.利用一步浸渍法制备了一系列ZnO/P25复合光催化剂,考察了其光催化降解气相甲苯性能.X射线粉末衍射结果表明,ZnO/P25异质光催化剂是由ATiO_2,RTiO_2和红锌矿三种物相结构组成.高分辨透射电镜结果表明,ZnO/P25具备三相异质结ZnO(002)/ATiO_2(101)/RTiO_2(110).紫外可见光谱、荧光光谱和光电流表征结果表明,ZnO/P25所形成的三相异质结不但增强了光吸收能力,还实现了多通道电子/空穴分离.催化降解实验表明,ZnO/P25异质光催化剂能在室温紫外光辐射下将甲苯完全矿化为CO_2和H2O.基于三相异质结和多通道光生电子-空穴对分离的形成及促进作用,ZnO/P25光催化活性和速率均明显高于P25.本文报道的多通道载流子分离理念可为高效光催化剂设计和应用提供一种新思路.

摘要：燃料电池技术的商业化进程主要受制于其阴极动力学缓慢的氧还原反应(ORR)所需的高铂量电催化剂,因此急需开发更高活性的电催化剂。过去十年里,人们在提高铂基催化剂ORR活性的研究取得了极大进展。本文概述了通过结构调控提升铂基纳米晶氧还原电催化性能的最新进展,依据纳米晶的空间维度展开讨论,同时列举各类电催化材料的优缺点。基于理论和实验结果,本文重点讨论铂基纳米晶应用于氧还原电催化的构效关系,以及其对下一代电催化材料结构设计方面的潜在指导意义。最后,我们对此领域未来的研究方向做了展望。

摘要：苯酚是一种重要的基本有机化工原料.全球近90%的苯酚都是经"三步异丙苯法"工艺合成而得,但是该工艺存在单程苯酚收率低(<5%)、酸污染严重等不足.同时由于联产丙酮,苯酚的产量也受丙酮市场所制约.由苯经氧化或羟基化一步法合成苯酚是催化化学领域中一项极具挑战的课题.由于苯分子较难活化,而苯酚易于深度氧化,因此研发和设计具有高活性和高选择性的催化剂是该课题的研究核心.因具有诸多特殊的理化性质,石墨相氮化碳(g-C_3N_4)作为一种新型碳质材料近年来在光催化、热催化、燃料电池和气体吸附等领域展示出广阔的应用前景.g-C_3N_4的类石墨层基本单元为大π共轭的三均三嗪环,对苯分子具有良好的吸附和活化能力.目前,g-C_3N_4(尤其是具有高比表面的介孔材料)在苯Friedel-Crafts烷基化和酰基化反应、苯的CO2氧化等反应中均显示了良好的催化活性.尽管如此,由于缺乏合适的氧化活性中心,纯的g-C_3N_4对苯直接羟基化几乎无催化活性.本课题组曾将乙酰丙酮氧钒和氧化钒负载至介孔g-C_3N_4,发现该类催化剂在H2O2参与的苯直接羟基化反应中,苯转化率高达18%,而苯酚选择性大于95%.然而,此类介孔g-C_3N_4均采用硬模板法合成,制备周期长且需要HF溶液蚀刻氧化硅模板.另外,钒基组分在介孔g-C_3N_4表面也存在着部分溶脱现象.本文以FeCl_3和二氰二胺为前驱体,通过一步热解法直接合成了含铁的g-C_3N_4材料(Fe-g-C_3N_4).采用N2吸附-脱附、XRD、TG、FT-IR、UV-vis、XPS光谱和TEM对材料的理化性质进行表征.结果显示,Fe的原位引入能显著提高g-C_3N_4的比表面积和孔体积,且使其依然保持石墨相结构.同时,富N的g-C_3N_4材料能有效地锚定Fe离子,使其均匀地分散在载体表面.作为多相催化剂,Fe-g-C_3N_4在H_2O_2环境下对苯羟基化合成苯酚的反应表现出较高的催化活性.当反应温度为60°C,其苯酚收率最高可达17.5%,且回收使用多次催化剂活性表现稳定.与之前报道的含铁和负载氧化钒或乙酰丙酮氧钒的g-C_3N_4催化剂材料相比,Fe-g-C_3N_4催化剂制备工艺更加简便.