摘要：Phase transformation of two-dimensional(2D)nanomaterials can lead to significant changes in electronic and optical properties,which enables the development of novel *** strategies for phase engineering of 2D nanomaterials have drawn considerable attention in recent *** review focuses on the state-of-the-art progress in the phase transformation of 2D nanomaterials and their catalytic ***,the basic concepts of phase transformation and the outstanding electronic and optical properties induced by phase transformation are briefly ***,different strategies for achieving phase transformation are discussed in detail and classified into several types based on their characteristics,including(i)doping,(ii)external fields,(iii)optical irradiation,(iv)strain effect,(v)high-energy particle excitation,and(vi)thermal *** applications of 2D nanomaterials in catalysis based on phase transformation have also been ***,a summary of the technical challenges to phase control in 2D nanomaterials and potential opportunities for developing novel applications is presented.

摘要：Landscape design for a green community should be favorable for the ambient ecological environment and for enhancement of both the local climate of a residential area and the environmental quality of life. This paper presents optimization methods for plant landscape design that take account of results of comparisons of noise reduction effects, heat island temperature decreases and effects on ventilation. These methods are based on different plant configurations and various luminous environments, such as exterior sunshine and shaded areas after the simulation of exterior luminous, acoustic and thermal environments of a residential area using the analytic software ECOTECT, CADNA/A, and PHEONICS. Three different types of residential buildings are simulated including a faculty apartment in the Xixi Campus of zhejiang University, the Huaqing Villa and the Gangwan Jiayuan faculty apartment of zhejiang University, China, based on green building design theory. In addition, the methods and process flow of landscape design of green residential areas are also described for the improvement of the exterior physical living environment.

摘要：A new explanation of quaternary Q gate expression in Post algebra is given in this paper by using transmission function theory proposed in [1] and the quaternary ECL Q gate circuit is de- *** SPICE2 simulation to this circuit has confirmed that it has desired logical function and is totally compatible with various quaternary ECL circuits proposed before.

摘要：To reduce the environmental impact of mechanical parts, an approach integrating structural design and material selection was studied. Adding the discrete variable of material, a hybrid optimization model was built with the aim of minimizing environmental impact and based on an ordinary structure optimization model. An optional material set was built by combining measures of qualitative and quantitative screening, while the lifecycle environmental impact of the materials was quantified using the method of Eco-indicator 99. Two groups of structurally optimal solutions were calculated with ideal and negative-ideal materials selected respectively, and then the hybrid model was simplified by comparing the solutions. A material environmental performance index was calculated using an analytic method. By comparing this index for every material in the optional material set, the optimal material can be found and the structural solutions calculated. This method was applied to a dowel bar design process as a case study. The results show that the environmental impact of each material has a significant effect on the optimal structural solution, and it is necessary to study the integration of structural design and material selection.

摘要：Mandibular defect occurs more frequently in recent years,and clinical repair operations via bone transplantation are difficult to be further improved due to some intrinsic *** engineering,which is a hot research field of biomedical engineering,provides a new direction for mandibular defect *** the basis and key part of tissue engineering,scaffolds have been widely and deeply studied in regards to the basic theory,as well as the principle of biomaterial,structure,design,and fabrication ***,little research is targeted at tissue regeneration for clinic repair *** mandibular bone has a special structure,rather than uniform and regular structure in existing studies,a methodology based on tissue engineering is proposed for mandibular defect repair in this *** steps regarding scaffold digital design,such as external shape design and internal microstructure design directly based on triangular meshes are discussed in *** analyzing the theoretical model and the measured data from the test parts fabricated by rapid prototyping,the feasibility and effectiveness of the proposed methodology are properly *** works about mechanical and biological improvements need to be done to promote its clinical application in future.

摘要：Parallel mechanisms（PMs） have been used as skeletons or end-effectors in various advanced manufacturing equipment. Compared with their serial counterparts, PMs offer high rigidity, good dynamic response, and large payload capability.

摘要：For planning optimum multiple stresses accelerated life test plans, a commonly followed guiding principle is that all parameters of the life-stress relationship should be estimated, and the number of the stress level combinations must be no less than the number of parameters of the life-stress relationship. However, the general objective of an accelerated life test（ALT） is to assess thep-th quantile of the product life distribution under normal stress. For this objective,estimating all model parameters is not necessary, and this will increase the cost of test. Based on the theoretical conclusion that the stress level combinations of the optimum multiple stresses ALT plan locate on a straight line through the origin of coordinate, it is proposed that a design idea of planning the optimum multiple stresses ALT plan through transforming the problem of designing an optimum multiple stresses ALT plan to designing an optimum single stress ALT plan. Moreover, a method of planning the optimum multiple stresses ALT plan which can avoid estimating all model parameters is established. An example shows that, the proposed plan which only has two stress level combinations could achieve an accuracy no less than the traditional plan, and save the test time and cost on one stress level combination at least; when the actual product life is less than the design value, even the deviation of the model initial parameters value is up to 20%, the variance of the estimation of thep-th quantile of the proposed plan is still smaller than the traditional plans approximately 25%. A design method is provided for planning the optimum multiple stresses ALT which uses the statistical optimum degenerate test plan as the optimum multiple stresses accelerated life test plan.

摘要：An analysis illustrates the loop nonlinear performance in a bang-bang PLL. A third-order equivalent model is deduced to give an approximate evaluation of the loop parameters. The architecture of the proposed phase detector is composed of four master-slave DFFs and two XORs based on the current mode logic circuit. A no-load architecture is introduced in the XOR design. The oscillator is designed with an LC VCO implementation for the jitter requirement. A simple voltage-to-current converter is proposed to drive the loop filter. The loop filter design is described in detail, which is important to ensure the nonlinear loop stability. The chip is fabricated in a 0.18 μm CMOS technology. The experimental results show that it can achieve the frequency range of 2.995 to 3.35 GHz, and a phase noise of-118.38 dBc/Hz at 1 MHz offset. The frequency to voltage gain is 270 MHz/V. The chip consumes less than 81 mW with 1.8 V supply voltage, and it occupies a 0.5 mm2 area.

摘要：Endmember extraction is a key step in the hyperspectral image analysis process. The kernel new simplex growing algorithm （KNSGA）, recently developed as a nonlinear alternative to the simplex growing algorithm （SGA）, has proven a promising endmember extraction technique. However, KNSGA still suffers from two issues limiting its application. First, its random initialization leads to inconsistency in final results; second, excessive computation is caused by the iterations of a simplex volume calculation. To solve the first issue, the spatial pixel purity index （SPPI） method is used in this study to extract the first endrnember, eliminating the initialization dependence. A novel approach tackles the second issue by initially using a modified Cholesky fac- torization to decompose the volume matrix into triangular matrices, in order to avoid directly computing the determinant tauto- logically in the simplex volume formula. Theoretical analysis and experiments on both simulated and real spectral data demonstrate that the proposed algorithm significantly reduces computational complexity, and runs faster than the original algorithm.

摘要：Integrated printing of magnetic soft robots with complex structures using recyclable materials to achieve sustainability of the soft robots remains a persistent ***,we propose a kind of ferromagnetic fibers that can be used to print soft robots with complex *** ferromagnetic fibers are recyclable and can make soft robots *** ferromagnetic fibers based on thermoplastic polyurethane(TPU)/NdFeB hybrid particles are extruded by an *** use a desktop three-dimensional(3D)printer to demonstrate the feasibility of printing two-dimensional(2D)and complex 3D soft *** printed soft robots can be recycled and reprinted into new robots once their tasks are ***,these robots show almost no difference in actuation capability compared to prior versions and have new *** applications include lifting,grasping,and moving objects,and these functions can be operated untethered *** addition,the locomotion of the magnetic soft robot in a human stomach model shows the prospect of medical ***,these fully recyclable ferromagnetic fibers pave the way for printing and reprinting sustainable soft robots while also effectively reducing e-waste and robotics waste materials,which is important for resource conservation and environmental protection.