摘要：The infamous type Ⅳ failure within the fine-grained heat-affected zone (FGHAZ) in G115 steel weldments seriously threatens the safe operation of ultra-supercritical (USC) power *** this work,the traditional thermo-mechanical treatment was modified via the replacement of hot-rolling with cold rolling,i.e.,normalizing,cold rolling,and tempering (NCT),which was developed to improve the creep strength of the FGHAZ in G115 steel *** NCT treatment effectively promoted the dissolution of preformed M_(23)C_(6)particles and relieved the boundary segregation of C and Cr during welding thermal cycling,which accelerated the dispersed reprecipitation of M_(23)C_(6) particles within the fresh reaustenitized grains during post-weld heat *** addition,the precipitation of Cu-rich phases and MX particles was promoted evidently due to the deformation-induced *** a result,the interacting actions between precipitates,dislocations,and boundaries during creep were reinforced *** this strategy,the creep rupture life of the FGHAZ in G115 steel weldments can be prolonged by 18.6%,which can further push the application of G115 steel in USC power plants.

摘要：Exclusive responsiveness to ultraviolet light (~3.2 eV) and high photogenerated charge recombination rate are the two primary drawbacks of pure TiO_(2). We combined N-doped graphene quantum dots (N-GQds), morphology regulation, and heterojunction construction strategies to synthesize N-GQd/N-doped TiO_(2)/P-doped porous hollow g-C_(3)N_(4) nanotube (PCN) composite photocatalysts (denoted as G-TPCN). The optimal sample (G-TPCN doped with 0.1wt% N-GQd, denoted as 0.1% G-TPCN) exhibits significantly enhanced photoabsorption, which is attributed to the change in bandgap caused by elemental doping (P and N), the improved light-harvesting resulting from the tube structure, and the upconversion effect of N-GQds. In addition, the internal charge separation and transfer capability of0.1% G-TPCN are dramatically boosted, and its carrier concentration is 3.7, 2.3, and 1.9 times that of N-TiO_(2), PCN, and N-TiO_(2)/PCN(TPCN-1), respectively. This phenomenon is attributed to the formation of Z-scheme heterojunction between N-TiO_(2) and PCNs, the excellent electron conduction ability of N-GQds, and the short transfer distance caused by the porous nanotube structure. Compared with those of N-TiO_(2), PCNs, and TPCN-1, the H2 production activity of 0.1%G-TPCN under visible light is enhanced by 12.4, 2.3, and 1.4times, respectively, and its ciprofloxacin (CIP) degradation rate is increased by 7.9, 5.7, and 2.9 times, respectively. The optimized performance benefits from excellent photoresponsiveness and improved carrier separation and migration efficiencies. Finally, the photocatalytic mechanism of 0.1% G-TPCN and five possible degradation pathways of CIP are proposed. This study clarifies the mechanism of multiple modification strategies to synergistically improve the photocatalytic performance of 0.1% G-TPCN and provides a potential strategy for rationally designing novel photocatalysts for environmental remediation and solar energy conversion.

摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(rOS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of rOS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3d)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

摘要：有机集成化光电子器件兼具了小型化和多功能性的优势,如集成了有机发光和紫外探测的有机发光紫外探测器件(OLEd-UVOPds).这种器件中的有机光电材料的设计仍然面临重大的挑战.在本文中,以蒽为π桥,腈基苯为受体,三苯胺(TPA)和二甲基三苯胺(2mTPA)分别为给体,设计并合成了两种可用于OLEd-UVOPd器件的蓝色发光分子,TPA-AN和2mTPA-AN.它们的发光峰分别位于474和488 nm处,荧光量子产率为51.1%和46.6%.通过单载流子器件计算得到其电子迁移率分别为3.96×10^(-5)和6.63×10^(-7)cm^(2)V^(-1)s^(-1).基于TPA-AN的OLEd器件表现出强的蓝光发射,最大亮度为43,110 cd m^(-2),最大外量子效率(EQE)为8.1%.它们在OLEd-UVOPd集成器件中表现出优异的性能,紫外探测率分别为7.18×10^(11)和2.85×10^(12)Jones,最大EQE分别为8.7%和5.9%.

摘要：单原子催化剂由于其独特的电子结构和最高的原子利用率,在各种催化体系中具有广阔的应用前景。调节SACs催化剂的电子结构是其进一步发展的关键,可以通过调节电子性质来优化催化剂的吸附能和键能,从而提高催化活性和稳定性。本文通过SACs的电子结构及其相关知识,对SACs在催化中的作用有了全面的了解。由于电催化是一种减少碳排放和利用可再生能源的技术,并且作为解决日益严重的空气污染问题的方法而受到越来越多的关注,因此高性能催化剂的设计至关重要。为此,讨论了各种电子性质,如能带结构、轨道杂化和相关自旋态等。本文讨论了SACs的电子结构对其电化学催化性能的影响,并探讨了其与SACs活性和稳定性的关系。了解催化过程中电子结构的基本原理,可以为今后各种催化反应中催化剂的设计提供合理的指导。

摘要：具有生物力学和生化活性的敷料在伤口护理和皮肤组织再生中起着至关重要的作用.然而,机械失配和药物释放管理所涉及的问题限制了当前敷料的有效使用.在本工作中,我们报道了一种简单的策略,即采用聚偏二氟乙烯(PVdF)作为底物,通过嵌入不同尺寸的沸石咪唑酸盐框架(ZIF-8)种子,以推动具有均匀蜂窝结构的高柔性金属有机框架(MOF)复合膜的受控生长,用于药物负载和释放.以嵌入的种子为控制中心,形成的多孔膜具有约0.7-3μm的宽孔隙.这种可调节的微尺度孔与ZIF-8中的固有纳米孔不仅可以有效地提高抗炎类药物的负载(姜黄素,CCM),而且还能够快速并可控地释放药物,大大提高了抗菌活性,同时促进细胞生长.其中,在40 nm种子上生长的0.7μm多孔膜的表现优于其他蜂窝膜,与2μm多孔膜(相当于裸PVdF基质)相比,细胞增殖能力提高了约2倍,针对金黄色葡萄球菌(***)和大肠杆菌(***)的抗菌活性分别提高了5倍和2.4倍,是基底抗菌活性的5倍,这是因为这种最佳孔几何结构具有CCM和Zn2+释放特性的平衡效应.这种可控分层孔阵列膜的独特性质有望真正用于伤口愈合,同时也为生物医学设计提供了新的指导.

摘要：Lithium-sulfur(Li-S)batteries are regarded as one of the most promising next-generation energy storage systems due to their high theoretical energy density and low material ***,the conventional ether-based electrolytes of Li-S batteries are extremely flammable and have high solubility of lithium polysulfides(LiPS),resulting in a high safety risk and a poor life ***,we report an ether/carbonate co-solvent fluorinated electrolyte with a special solvation sheath of Li^(+),which can prevent the formation of dissoluble long-chain LiPS of the sulfur cathode,restrict Li dendrite growth at the anode side,and show fire resistance in combustion *** a result,the proposed Li-S batteries with 70 wt%sulfur content in its cathode deliver stable life cycle,low self-discharge ratio,and intrinsic ***,the unique passivation characteristics of the designed fluorinated electrolyte break several critical limitations of the traditional“liquid phase”-based Li-S batteries,offering a facile and promising way to develop long-life and high-safety Li-S batteries.

摘要：The one-ladle technology requires an efficient ironmaking and steelmaking interface. The scheduling of the hot metal ladle in the steel plant determines the overall operational efficiency of the interface. Considering the strong uncertainties of real-world production environments, this work studies the dynamic scheduling problem of hot metal ladles and develops a data-driven three-layer approach to solve this problem. A dynamic scheduling optimization model of the hot metal ladle operation with a minimum average turnover time as the optimization objective is also constructed. Furthermore, the intelligent perception of industrial scenes and autonomous identification of disturbances, adaptive configuration of dynamic scheduling strategies, and real-time adjustment of schedules can be realized. The upper layer generates a demand-oriented prescheduling scheme for hot metal ladles. The middle layer adaptively adjusts this scheme to obtain an executable schedule according to the actual supply–demand relationship. In the lower layer, three types of dynamic scheduling strategies are designed according to the characteristics of the dynamic disturbance in the model:real-time flexible fine-tuning, local machine adjustment, and global rescheduling. Case test using 24 h production data on a certain day during the system operation of a steel plant shows that the method and system can effectively reduce the fluctuation and operation time of the hot metal ladle and improve the stability of the ironmaking and steelmaking interface production rhythm. The data-driven dynamic scheduling strategy is feasible and effective, and the proposed method can improve the operation efficiency of hot metal ladles.

摘要：In this work, epitaxial growth of LaMnO3 thin films on different substrates using pulsed laser deposition under tensile and compressive strain was studied. The intrinsic exchange bias effect was observed in the single A-type antiferromagnetic LaMnO3 films no matter whether the tensile or compressive strain was supplied by the substrates. due to the lattice mismatch between the film and different substrates, the intense strain can induce MnO6 octahedral rotation in the bottom region of the film neighboring the substrate, which leads to the distortion of MnO6 octahedron and the net magnetic behavior. However, the upper part maintains the original A-type antiferromagnetic order due to strain relaxation. The exchange bias effect in single films is attributed to the coupling between the bottom canted magnetic part and the upper antiferromagnetic region. The observation of exchange bias in single films on different substrates enables the emergence of a new class of biasing components in spintronics, which are based on strain-engineering.

摘要：It is a great challenge to develop highly active oxygen evolution reaction(OEr)electrocatalysts with superior *** this study,a NiFe layered double hydroxidedecorated phosphide(NiFe LdH@CoP/NiP_(3))was constructed to display satisfactory OEr activity and good stability for water splitting in alkaline *** an overpotential of 300 mV,NiFe LdH@CoP/NiP_(3) achieved a current density of 82 mA cm^(-2) for the OEr,which was 9.1 and 2.3 times that of CoP/NiP_(3) and NiFe LdH,***,the reconstruction behavior,during which oxyhydroxides formed,was studied by a combination of X-ray photoelectron spectroscopy,raman spectroscopy,and scanning electron microscopy.A synergistic effect between NiFe LdH and CoP/NiP_(3) was also observed for the hydrogen evolution ***,when NiFe LdH@CoP/NiP_(3) acted as both the cathode and anode for overall water splitting,a high current density of 100 mA cm^(-2) was maintained for more than 275 *** addition,under Xe light irradiation,a solar-to-hydrogen efficiency of 9.89% was achieved for solar-driven water *** work presents the coupling of different active compositions,and can provide a reference for designing bifunctional electrocatalysts.