摘要：In the complex multicore chip system,network on-chip(NoC)is viewed as a kind of system interconnection that can substitute the traditional interconnect networks,which will improve the system performance and communication *** regard to the complex and large scale NoC,simple and efficient routing nodes are the critical factors to achieve low-cost and low-congestion communication *** paper proposes an unbuffered switch architecture and makes detailed analysis of the mechanism of buffer in the switch *** to the simulation results,the S-mesh using the unbuffered switch architecture is better in terms of the optimal performance in message latency than some typical NoC architectures,such as 2D-mesh,Fat-tree,Butterfly,Octagon and so *** synthesis results of design compiler indicate that the unbuffered switch has obvious advantages of achieving cost and operating speed for the chips.

摘要：The radial force is a critical factor to determine the sealing performance of radial lip *** effects of radial force produced by garter spring and interference on the static contact properties and sealing performance of a radial lip seal are investigated by numerical simulations and ***-element analysis and mixed elastohydrodynamic lubrication simulation are *** force,contact width,temperature in the sealing zone,the reverse pumping rate and friction torque are measured.A critical value of interference for a cost-effectively designed radial lip seal is *** force is required to compensate the decrease of the radial force because of the interference and used as a possible way to obtain intelligent control of sealing *** quantitative results gotten in this study could provide guide for the seal design and improvement.

摘要：This paper designs and develops a framework on a distributed computing platform for massive multi-source spatial data using a column-oriented database(HBase).This platform consists of four layers including ETL(extraction transformation loading) tier,data processing tier,data storage tier and data display tier,achieving long-term store,real-time analysis and inquiry for massive ***,a real dataset cluster is simulated,which are made up of 39 nodes including 2 master nodes and 37 data nodes,and performing function tests of data importing module and real-time query module,and performance tests of HDFS's I/O,the MapReduce cluster,batch-loading and real-time query of massive *** test results indicate that this platform achieves high performance in terms of response time and linear scalability.

摘要：We introduce PBGFs with the cladding made of our newly designed quasi-hexagonal air holes and demonstrate how it actually operates. This cladding structure is introduced for the first time to the best of our knowledge, and is realized by making use of the hydrofluoric acid＇s corrosive properties. The fibre corrosion can be accurately controlled, thus opening us the gate for the design and fabrication of new PB. GFs with more complex and more efficient cladding structures. Numerical results and actual simulations indicate that PBGFs built with this cladding structure have improved b^dgap properties and guiding bands as wide as 500 nm have been theoretically reached. Using the same method, we have also been able to design two other types of PBGFs with improved cladding structure.

摘要：A novel photocatalytic reactor was developed to remove （1,1-bis（4-chlorophenyl）-2,2,2-trichloroethane） （DDT） from water. In the reactor, a cenosphere was used to support TiO2 film made by means of sol-gel. Because the cenospheres were coated with TiO2, their specific gravity was slightly increased from the original 0.6-0.8 to 0.8-0.9, so that they were able to be suspended in water. With the mixed operation of a bubbler, the water in the reactor was in a well-fluidized state. The bottom of the reactor is a sand filter bed, which can be used to prevent the photocatalyst from being lost. A mathematical model of the reactor has been developed in the two primary influential factors： ultraviolet （UV） light intensity and photocatalyst concentration. With such a model, the reactor can be designed more reasonably.

摘要：This paper presents a new simple method of implicit time integration with two control parameters for solving initial-value problems of dynamics such that its accuracy is at least of order two along with the conditional and unconditional stability regions of the parameters. When the control parameters in the method are optimally taken in their regions, the accuracy may be improved to reach of order three. It is found that the new scheme can achieve lower numerical amplitude dissipation and period dispersion than some of the existing methods, e.g. the Newmark method and Zhai＇s approach, when the same time step size is used. The region of time step dependent on the parameters in the new scheme is explicitly obtained. Finally, some examples of dynamic problems are given to show the accuracy and efficiency of the proposed scheme applied in dynamic systems.

摘要：An optimal drainage tunnel location determination method for landslide prevention was proposed to solve the existing problems in drainage tunnel construction. Current applications of drainage tunnel systems in china were reviewed and the fimctions of drainage tunnel were categorized as catchment and interception. Numerical simulations were conducted. The results show that both catchment and interception tunnels have variation of the function in the simulation of monolayer model, which shows the reduction of permeability condition in lower layer. The function of catchment can be observed in the deep slope, while the function of interception is observed near groundwater source. By using the slope safety factor and discharge water amount as the objectives of optimal drainage tunnel location, and pore-water pressure in fixed node and section flux as the judgment for construction quality of adjacent drainage tunnel, the design principle of drainage tunnel was introduced. The K103 Landslide was illustrated as an example to determine the optimal drainage tunnel location. The measured drainage tunnel efficiency was evaluated and compared with that from the numerical analyses based on groundwater data. The results validate the present numerical study.

摘要：By using the proposed 3-D mode propagation analysis method and point-matching method, a polymer multimode interference (MMI) Mach-Zehnder interferometer (MZI) electro-optic (EO) switch is designed and optimized for enhancing the EO modulating efficiency and matching the impedance and the velocity. The designed switch possesses low driving voltages of ±1.375 V with a short EO active region length of 5 mm under 1550 nm wavelength, and the estimated cutoff switching frequency is up to 263 GHz due to the less mismatch between the lightwave velocity and microwave velocity. The 3-dB lightwave bandwidth is 60 nm, and within the wavelength range of 1520-1580 nm, the insertion loss and crosstalk are less than 6.71 and -30 dB, respectively.

摘要：A low noise distributed amplifier consisting of 9 gain cells is *** chip is fabricated with 0.15-μm GaAs pseudomorphic high electron mobility transistor（PHEMT） technology from Win Semiconductor of Taiwan.A special optional gate bias technique is introduced to allow an adjustable gain control range of 10 dB.A novel cascode structure is adopted to extend the output voltage and *** measurement results show that the amplifier gives an average gain of 15 dB with a gain flatness of±1 dB in the 2-20 GHz *** noise figure is between 2 and 4.1 dB during the band from 2 to 20 *** amplifier also provides 13.8 dBm of output power at a 1 dB gain compression point and 10.5 dBm of input third order intercept point（IIP3）,which demonstrates the excellent performance of *** power consumption is 300 mW with a supply of 5 V,and the chip area is 2.36×1.01 mm^2.

摘要：For the dynamic demand assessment of bridge structures under ship impact loading,it may be prudent to adopt analytical models which permit rapid analysis with reasonable ***,a nonlinear dynamic macro-element is proposed and implemented to quantify the demand of bridge substructures subjected to ship *** the proposed nonlinear macro-element,a combination of an elastic-plastic spring and a dashpot in parallel is employed to describe the mechanical behavior of ship-bows with strain rate *** on the analytical model using the proposed macro-element,a typical substructure under 5000 deadweight tonnage(DWT) ship collision is *** analyses indicate that the responses of the structure using the nonlinear macro-element agree with the results from the high resolution model,but the efficiency and feasibility of the proposed method increase significantly in practical ***,comparisons between some current design codes(AASHTO,JTGD60-2004,and TB10002.1-2005) and the developed dynamic analysis method suggest that these design codes may be improved,at least to consider the effect of dynamic amplification on structural demand.