摘要：The problems associated with vibrations of viaducts and low-frequency structural noise radiation caused by train excitation continue to increase in importance.A new floating-slab track vibration isolator-non-obstructive particle damping-phononic crystal vibration isolator is proposed herein,which uses the particle damping vibration absorption technology and bandgap vibration control *** vibration reduction performance of the NOPD-PCVI was analyzed from the perspective of vibration *** paper explores the structure-borne noise reduction performance of the NOPD-PCVIs installed on different bridge structures under varying service conditions encountered in practical engineering *** load transferred to the bridge is obtained from a coupled train-FST-bridge analytical model considering the different structural parameters of *** vibration responses are obtained using the finite element method,while the structural noise radiation is simulated using the frequency-domain boundary element *** the particle swarm optimization algorithm,the parameters of the NOPD-PCVI are optimized so that its frequency bandgap matches the dominant bridge structural noise frequency *** noise reduction performance of the NOPD-PCVIs is compared to the steel-spring isolation under different service conditions.

摘要：J-aggregates of cyanine have shown great merits in tumor photothermal therapy(PTT)due to their distinct redshift absorption as well as superior photothermal conversion efficiency(PCE).However,due to the complexity of intermolecular interactions,especially the impact of steric hindrance on aggregation,exploring effective strategies to regulate the aggregation modes of organic materials remains ***,steric hindrance-regulated J-aggregation of near-infrared(NIR)cyanine was reported based on Pt-coordinated cyanine self-assembly with unexpected“butterfly effect”.Two Pt-coordinated cyanine dimers CyR-Pt(R=Me and Et)were synthesized and spontaneously self-assembled into aggregates in aqueous ***-Pt aggregates were loose and amorphous *** replacing ethyl with methyl to reduce steric hindrance,a tiny change resulted in the generation of tightly stacked cyanine J-aggregates(thickness less than 3 nm)observed in CyMe-Pt ***,this unexpected“butterfly effect”enabled CyMe-Pt J-aggregates to effectively inhibit reactive oxygen species and greatly improve its ***,CyMe-Pt J-aggregates with NIR-II absorption exhibited outstanding photothermal stability and higher PCE(η=37%)than CyEt-Pt disordered aggregates(η=20%).Evident tumor suppression performance of CyMe-Pt J-aggregates was validated under 980 nm laser irradiation,demonstrating its great potential in tumor PTT.

摘要：Based on the building principle of additive manufacturing,printing orientation mainly determines the tribological properties of joint *** this study,we created a polyether-ether-ketone(PEEK)joint prosthesis using fused filament fabrication and investigated the effects of printing orientation on its tribological properties using a pin-on-plate tribometer in 25% newborn calf *** ultrahigh molecular weight polyethylene transfer film is formed on the surface of PEEK due to the mechanical capture of wear debris by the 3D-printed groove morphology,which is significantly impacted by the printing orientation of *** the printing orientation was parallel to the sliding direction of friction,the number and size of the transfer film increased due to higher steady *** transfer film protected the matrix and reduced the friction coefficient and wear rate of friction pairs by 39.13%and 74.33%,***,our findings provide a novel perspective regarding the role of printing orientation in designing knee prostheses,facilitating its practical applications.

摘要：The solution-processed method for organic light-emitting diodes(OLEDs)offers the benefits of cost-effectiveness and enhanced material *** the multilayer architecture of solution-processed OLEDs(SOLEDs),the role of hole-transport materials(HTMs)is pivotal for cascade hole ***,commercial HTMs such as poly-(9,9-dioctylfluorene-alt-N-(4-sec-butylphenyl)-diphenylamine)(TFB)are hampered by incompatible energy levels and redissolution with overlayer solvent,prompting the exploration of cross-linkable HTMs(X-HTMs)for better *** this study,we have developed two novel small-molecule X-HTMs,N^(1),N^(1)′-((perfluoropropane-2,2-diyl)bis(4,1-phenylene))bis(N^(4),N^(4)-diphenyl-N^(1)-(4-vinylphenyl)benzene-1,4-diamine)(FTPA-V)and N,N′-((perfluoropropane-2,2-diyl)bis-(4,1-phenylene))bis(9-phenyl-N-(4-vinylphenyl)-9H-carbazol-3-amine)(FPCz-V),which incorporate thermally cross-linkable vinyl groups and electron-rich trifluoromethyl *** X-HTMs enhance interfacial contact through superior film formation and solvent resistance,along with optimal energy *** application of X-HTMs significantly enhances the efficiencies and longevities of blue,green,and red ***,blue SOLED incorporating FPCz-V exhibits unprecedented lifetime(LT95)extending to over 150 h,setting a new record for blue *** electrochemistry stability,high bond dissociation energy,and triplet energy levels of X-HTMs can effectively minimize exciton annihilation and prolong the *** findings underscore the potential of X-HTM optimization to propel the development of stable solution-processed luminescent technologies.

摘要：Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication *** have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of *** this review,recent developments in relevant laser processes are summarized under two separate ***,transformative approaches,such as for laser-induced graphene,are *** addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic *** addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new ***,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy *** addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

摘要：Traditional tumor models do not tend to accurately simulate tumor growth in vitro or enable personalized treatment and are particularly unable to discover more beneficial targeted *** address this,this study describes the use of threedimensional(3D)bioprinting technology to construct a 3D model with human hepatocarcinoma SMMC-7721 cells(3DP-7721)by combining gelatin methacrylate(GelMA)and poly(ethylene oxide)(PEO)as two immiscible aqueous phases to form a bioink and innovatively applying fluorescent carbon quantum dots for long-term tracking of *** GelMA(10%,mass fraction)and PEO(1.6%,mass fraction)hydrogel with 3:1 volume ratio offered distinct pore-forming characteristics,satisfactorymechanical properties,and biocompatibility for the creation of the 3DP-7721 *** analysis and quantitative real-time fluorescence polymerase chain reaction(PCR)were used to evaluate the biological properties of the *** with the two-dimensional culture cell model(2D-7721)and the 3D mixed culture cell model(3DM-7721),3DP-7721 significantly improved the proliferation of cells and expression of tumor-related proteins and ***,we evaluated the differences between the three culture models and the effectiveness of antitumor drugs in the three models and discovered that the efficacy of antitumor drugs varied because of significant differences in resistance proteins and genes between the three *** addition,the comparison of tumor formation in the three models found that the cells cultured by the 3DP-7721 model had strong tumorigenicity in nude *** evaluation of the levels of biochemical indicators related to the formation of solid tumors showed that the 3DP-7721 model group exhibited pathological characteristics of malignant tumors,the generated solid tumors were similar to actual tumors,and the deterioration was *** research therefore acts as a foundation for the application of 3DP-7721 models in drug devel

摘要：高效光电探测器在监控、热成像、光通信和环境监测等领域具有广泛、迫切的应用需求.优化光电探测器参数如微型化、高量子效率、超快响应速度等,仍然是一项艰巨的任务.我们提出了一种由顶部/底部MoTe_(2)和中间Ta_(2)NiSe_(5)层组成的双范德华异质结.利用双异质结界面增强光收集效率和产生两个对立的内置电场,使得器件具有400到1550 nm的宽光谱响应,并表现出优异的性能,包括82.9%的外量子效率和3.5/4.2μs的快速响应速度.此外,利用二维Ta_(2)NiSe_(5)纳米片的面内各向异性,我们实现了在635和1550 nm波长下的极化灵敏度,分别为16.3和8.1.这项研究为开发高性能和多功能光电探测器提供了平台,为先进光电器件的设计和应用提供了新的方向.

摘要：Exclusive responsiveness to ultraviolet light (~3.2 eV) and high photogenerated charge recombination rate are the two primary drawbacks of pure TiO_(2). We combined N-doped graphene quantum dots (N-GQDs), morphology regulation, and heterojunction construction strategies to synthesize N-GQD/N-doped TiO_(2)/P-doped porous hollow g-C_(3)N_(4) nanotube (PCN) composite photocatalysts (denoted as G-TPCN). The optimal sample (G-TPCN doped with 0.1wt% N-GQD, denoted as 0.1% G-TPCN) exhibits significantly enhanced photoabsorption, which is attributed to the change in bandgap caused by elemental doping (P and N), the improved light-harvesting resulting from the tube structure, and the upconversion effect of N-GQDs. In addition, the internal charge separation and transfer capability of0.1% G-TPCN are dramatically boosted, and its carrier concentration is 3.7, 2.3, and 1.9 times that of N-TiO_(2), PCN, and N-TiO_(2)/PCN(TPCN-1), respectively. This phenomenon is attributed to the formation of Z-scheme heterojunction between N-TiO_(2) and PCNs, the excellent electron conduction ability of N-GQDs, and the short transfer distance caused by the porous nanotube structure. Compared with those of N-TiO_(2), PCNs, and TPCN-1, the H2 production activity of 0.1%G-TPCN under visible light is enhanced by 12.4, 2.3, and 1.4times, respectively, and its ciprofloxacin (CIP) degradation rate is increased by 7.9, 5.7, and 2.9 times, respectively. The optimized performance benefits from excellent photoresponsiveness and improved carrier separation and migration efficiencies. Finally, the photocatalytic mechanism of 0.1% G-TPCN and five possible degradation pathways of CIP are proposed. This study clarifies the mechanism of multiple modification strategies to synergistically improve the photocatalytic performance of 0.1% G-TPCN and provides a potential strategy for rationally designing novel photocatalysts for environmental remediation and solar energy conversion.

摘要：通过将采热管群与充填采矿技术相结合可提取矿井中的地热能,有效缓解高地热带来的热害问题。本文以采热管群为研究对象,分析了充填体放热过程中传热流体的温度、速度和压力分布,讨论了雷诺数、管径、管间距和管排方式对采热管群性能的影响。结果表明:当雷诺数从100增加到5000时,换热量从2.24×10^(3)kJ增加到16.78×10^(3)kJ,综合评价因子从0.087增加到1.31。当管径从4 mm增加到6 mm时,换热量从15.07×10^(3)kJ增加到17.11×10^(3)kJ,综合评价因子从1.157增加到1.388。当管间距从130 mm增加到170 mm时,换热量从14.24×10^(3)kJ增加到16.25×10^(3)kJ,综合评价因子从1.013增加到1.263。此外,四路并联布置可以保证较高的换热量和较低的压降,从而获得较高的综合评价因子。该研究为充填体中采热管群的设计和优化提供了理论参考。