摘要：The problems associated with vibrations of viaducts and low-frequency structural noise radiation caused by train excitation continue to increase in importance.A new floating-slab track vibration isolator-non-obstructive particle damping-phononic crystal vibration isolator is proposed herein,which uses the particle damping vibration absorption technology and bandgap vibration control *** vibration reduction performance of the NOPD-PCVI was analyzed from the perspective of vibration *** paper explores the structure-borne noise reduction performance of the NOPD-PCVIs installed on different bridge structures under varying service conditions encountered in practical engineering *** load transferred to the bridge is obtained from a coupled train-FST-bridge analytical model considering the different structural parameters of *** vibration responses are obtained using the finite element method,while the structural noise radiation is simulated using the frequency-domain boundary element *** the particle swarm optimization algorithm,the parameters of the NOPD-PCVI are optimized so that its frequency bandgap matches the dominant bridge structural noise frequency *** noise reduction performance of the NOPD-PCVIs is compared to the steel-spring isolation under different service conditions.

摘要：Touch-sensitive screens are crucial components of wearable *** such as reduced graphene oxide(rGO),carbon nanotubes(CNTs),and graphene offer promising solutions for flexible touch-sensitive ***,when stacked with flexible substrates to form multilayered capacitive touching sensors,these materials often suffer from substrate delamination in response to deformation;this is due to the materials having different Young’s modulus *** results in failure to offer accurate touch screen *** this work,we demonstrate an induced charge-based mutual capacitive touching sensor capable of high-precision touch *** is enabled by electron trapping and polarization effects related to mixed-coordinated bonding between copper nanoparticles and vertically grown graphene ***,we used an electron cyclotron resonance system to directly fabricate graphene-metal nanofilms(GMNFs)using carbon and copper,which are firmly adhered to flexible *** being subjected to 3000 bending actions,we observed almost no change in touch *** screen interaction system,which has a signal-to-noise ratio of 41.16 dB and resolution of 650 dpi,was tested using a handwritten Chinese character recognition trial and achieved an accuracy of 94.82%.Taken together,these results show the promise of touch-sensitive screens that use directly fabricated GMNFs for wearable devices.

摘要：The practical engineering applications of powder metallurgy (PM) Ti alloys produced through cold compaction and pressure-less sintering are impeded by poor sintering densification, embrittlement caused by excessive O impurities, and severe sintering deforma-tion resulting from the use of heterogeneous powder mixtures. This review presents a summary of our previous work on addressing the above challenges. Initially, we proposed a novel strategy using reaction-induced liquid phases to enhance sintering densification. Near- complete density (relative density exceeding 99%) was achieved by applying the above strategy and newly developed sintering aids. By focusing on the O-induced embrittlement issue, we determined the onset dissolution temperature of oxide films in the Ti matrix. On the basis of this finding, we established a design criterion for effective O scavengers that require reaction with oxide films before their dissol-ution. Consequently, a ductile PM Ti alloy was successfully obtained by introducing 0.3wt% NdB6 as the O scavenger. Lastly, a powder- coating strategy was adopted to address the sintering deformation issue. The ultrafine size and shell-like distribution characteristics of coating particles ensured rapid dissolution and homogeneity in the Ti matrix, thereby facilitating linear shrinkage during sintering. As a result, geometrically complex Ti alloy parts with high dimensional accuracy were fabricated by using the coated powder. Our fundament-al findings and related technical achievements enabled the development of an integrated production technology for the high-performance and accurate shaping of low-cost PM Ti alloys. Additionally, the primary engineering applications and progress in the industrialization practice of our developed technology are introduced in this review.

摘要：Traditional tumor models do not tend to accurately simulate tumor growth in vitro or enable personalized treatment and are particularly unable to discover more beneficial targeted *** address this,this study describes the use of threedimensional(3D)bioprinting technology to construct a 3D model with human hepatocarcinoma SMMC-7721 cells(3DP-7721)by combining gelatin methacrylate(GelMA)and poly(ethylene oxide)(PEO)as two immiscible aqueous phases to form a bioink and innovatively applying fluorescent carbon quantum dots for long-term tracking of *** GelMA(10%,mass fraction)and PEO(1.6%,mass fraction)hydrogel with 3:1 volume ratio offered distinct pore-forming characteristics,satisfactorymechanical properties,and biocompatibility for the creation of the 3DP-7721 *** analysis and quantitative real-time fluorescence polymerase chain reaction(PCR)were used to evaluate the biological properties of the *** with the two-dimensional culture cell model(2D-7721)and the 3D mixed culture cell model(3DM-7721),3DP-7721 significantly improved the proliferation of cells and expression of tumor-related proteins and ***,we evaluated the differences between the three culture models and the effectiveness of antitumor drugs in the three models and discovered that the efficacy of antitumor drugs varied because of significant differences in resistance proteins and genes between the three *** addition,the comparison of tumor formation in the three models found that the cells cultured by the 3DP-7721 model had strong tumorigenicity in nude *** evaluation of the levels of biochemical indicators related to the formation of solid tumors showed that the 3DP-7721 model group exhibited pathological characteristics of malignant tumors,the generated solid tumors were similar to actual tumors,and the deterioration was *** research therefore acts as a foundation for the application of 3DP-7721 models in drug devel

摘要：四环素是一种广泛使用的抗生素,但它在环境中难以降解,而且会促使耐药细菌的出现.因此,迫切需要采取有效的措施对其进行检测和分解.在此背景下,我们设计了一种多肉状的ZnO/MOF/Fe_(3)O_(4)混合微型马达,用于动态检测和光催化降解四环素.我们使用微纳米加工和种子生长方法成功制备了具有多肉植物状结构的ZnO微型马达.在氧化锌马达阵列上,通过表面修饰,比如改变其表面电位、负载响应性检测功能MOF、磁性纳米颗粒和催化剂,最终得到了可用于动态荧光检测和高效降解的自驱动可控微马达.这种功能性微马达在环境检测和治理等方面具有很好发展前景.

摘要：通过将采热管群与充填采矿技术相结合可提取矿井中的地热能,有效缓解高地热带来的热害问题。本文以采热管群为研究对象,分析了充填体放热过程中传热流体的温度、速度和压力分布,讨论了雷诺数、管径、管间距和管排方式对采热管群性能的影响。结果表明:当雷诺数从100增加到5000时,换热量从2.24×10^(3)kJ增加到16.78×10^(3)kJ,综合评价因子从0.087增加到1.31。当管径从4 mm增加到6 mm时,换热量从15.07×10^(3)kJ增加到17.11×10^(3)kJ,综合评价因子从1.157增加到1.388。当管间距从130 mm增加到170 mm时,换热量从14.24×10^(3)kJ增加到16.25×10^(3)kJ,综合评价因子从1.013增加到1.263。此外,四路并联布置可以保证较高的换热量和较低的压降,从而获得较高的综合评价因子。该研究为充填体中采热管群的设计和优化提供了理论参考。

摘要：采用同心圆式反应器制备β-四钼酸铵,研究制备过程中Mo离子聚合形态和微观结构受溶液酸度影响的变化规律。结果表明,将溶液的pH值控制在2.5以下可以得到四钼酸铵晶体;采用NH_(3)·H_(2)O将溶液pH值调回至3.0有利于细粒钼酸铵结晶的溶解,并促进七钼酸铵向四钼酸铵结晶的转变;降低(NH_(4))_(4)Mo_(4)O_(12)(O_(2))2·2H_(2)O晶体与结晶母液的接触时间有利于获得β-(NH_(4))_(2)Mo_(4)O_(13)结晶。基于钼的聚合机理,设计多个格区的同心圆反应器,实现钼酸铵结晶的分区域调控。通过调控硝酸、氨水和含晶种的母液在各格区中加入的位置和时机,可制备出优质的β-(NH_(4))_(2)Mo_(4)O_(13)结晶。

摘要：本工作利用基于密度泛函理论的高通量计算方法,研究了由金属团簇和四羟基苯(THB)分子形成的232个具有Kagome晶格的有机金属网格.在由THB分子和过渡金属原子三聚体(称为Y_(3)-THB)组成的有机金属网格中,有7种网格结构是本征有机拓扑绝缘体.进一步引入过渡金属原子(Tl,Pb,Bi)后得到的X_(3)Y_(4)-THB结构中,发现了9个具有较大自旋轨道耦合能隙的本征有机拓扑绝缘体.在这些本征拓扑绝缘体中,α相Pb_(3)Zn_(4)-THB结构是具有拓扑平带的拓扑绝缘体,其非平庸自旋轨道耦合能隙(97.5 meV)几乎是其平带带宽(22.5 meV)的4倍,是实现分数量子霍尔效应的理想平台.该工作为设计具有大能隙的二维有机拓扑绝缘体提供了新的途径.

摘要：氮掺杂γ-石墨二炔(N-GDY)因其在能源、电子元器件和催化领域具有重要应用前景而备受关注.研究表明,N-GDY在不同的氮掺杂情况下会表现出迥异的物理化学性质.由于氮掺杂的多样性,N-GDY的理论及应用研究受到了极大的限制.鉴于此,本文采用鄂维南等人提出的DeepMD方法训练得到了具有第一性原理精度、适用于N-GDY的机器学习势.利用该机器学习势,系统研究了氮掺杂模式对N-GDY力学性能的影响.研究发现,氮原子掺杂会导致N-GDY的抗拉强度降低.在单个碳链上掺杂氮原子时,N-GDY的抗拉强度随着氮原子掺杂位点到苯环的距离变小而减弱.相邻碳链氮原子共掺杂能够使N-GDY表现出更强的各向异性力学特征.本文研究结果对N-GDY在能源存储和柔性设备等领域的潜在应用提供了理论支持,同时也表明了机器学习势在从大规模数据集中学习并预测碳纳米材料复杂力学性质方面的潜力,为纳米材料设计及工程应用具有重要指导作用.

摘要：磁场触发的催化剂轨道电子自旋排列已成为促进析氧反应的一种有趣而可行的策略.然而,具有强d-d库仑相互作用的高熵合金(HEAs)催化剂中的磁场增强机制尚未得到充分挖掘.在此,我们设计了具有优异软磁性的高熵合金金属片,在微小磁场下表现出显著的磁场增强催化作用,其磁导率可作为评估磁场增强的描述因子.具体地,仅施加50 mT的磁场,(FeCoNi)_(82.5)Cr_(17.5)HEAs的过电位下降就超过了36mV@10 mA cm^(-2).此外,过电位的降低与HEA的磁导率呈线性关系.原位拉曼光谱与理论计算结果表明,施加磁场可显著提高自旋密度,改善催化剂的3d电子与*O自由基的2p轨道之间的自旋相互作用,从而有效降低速率决定步骤(*O→*OOH)的能量障碍,进而促进O-O的形成.