摘要：Smart multi-stimuli responsive organic materials have become increasingly favored due to their advantages of high stability and easy *** this study,a cyanostilbene derivative((αZ)-2-chloro-α-[(4-methoxyphenyl)methylene]-5-pyridinehyde,TAR)was successfully synthesized,and its polymorphs(TAR-1 and TAR-2)exhibited multiple responsive behaviors under different stimulus ***-1 is supposed to have excellent mechanical properties,while TAR-2 shows fascinating heterotropic photochromism(green-cyan-yellow)under different intensities of ultraviolet(UV)irradiation,which has never been reported in previous *** investigation revealed that this was attributed to different degrees of[2+2]cycloaddition induced by UV *** addition,both polymorphs could be protonated during Trifluoroacetic acid fuming and deprotonate automatically after fuming,accompanied by the significant variation in ***,two scenarios were designed based on their unique stimuli-responsive properties,which proved their promising potential in fields of information security and anti-counterfeiting encryption.

摘要：The effect of W element on the microstructure evolution and mechanical properties of Al_(1.25)CoCrFeNi3 eutectic high-entropy alloy and Al_(1.25)CoCrFeNi_(3-x)W_(x)(x=0,0.05,0.1,0.3,and 0.5;atomic ratio)high-entropy alloys(HEAs)were *** show that the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs are composed of face-centered cubic and body-centered cubic(BCC)*** W content increases,the microstructure changes from eutectic to *** addition of W lowers the nucleation barrier of the BCC phase,decreases the valence electron concentration of the HEAs,and replaces Al in the BCC phase,thus facilitating the nucleation of the BCC *** results show that the addition of W greatly improves the mechanical properties,and solid-solution,heterogeneous-interface,and second-phase strengthening are the main strengthening *** yield strength,tensile strength,and elongation of the Al_(1.25)CoCrFeNi2.95W0.05 HEA are 601.44 MPa,1132.26 MPa,and 15.94%,respectively,realizing a balance between strength and *** fracture mode of the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs is ductile–brittle mixed fracture,and the crack propagates and initiates in the BCC *** eutectic lamellar structure impedes crack propagation and maintains plasticity.

摘要：As the main component of wearable electronic equipment,flexible pressure sensors have attracted wide attention due to their excellent sensitivity and their promise with respect to applications in health monitoring,electronic skin,and human-computer ***,it remains a significant challenge to achieve epidermal sensing over a wide sensing range,with short response/recovery time and featuring seamless conformability to the skin *** is critical since the capture of minute electrophysiological signals is important for health care *** this paper,we report the preparation of a nacre-like MXene/sodium carboxymethyl cellulose(CMC)nanocomposite film with a“brick-and-mortar”interior structure using a vacuum-induced self-assembly *** synergistic behavior of the MXene“brick”and flexible CMC“mortar”contributes to attenuating interlamellar self-stacking and creates numerous variable conductive pathways on the sensing *** resulted in a high sensitivity over a broad pressure range(i.e.,0.03-22.37 kPa:162.13 kPa^(-1);22.37-135.71 kPa:127.88 kPa^(-1);135.71-286.49 kPa:100.58 kPa^(-1)).This sensor also has a low detection limit(0.85 Pa),short response/recovery time(8.58 ms/34.34 ms),and good stability(2000 cycles).Furthermore,we deployed pressure sensors to distinguish among tiny particles,various physiological signals of the human body,space arrays,robot motion monitoring,and other related applications to demonstrate their feasibility for a variety of health and motion monitoring use cases.

摘要：Inspired by nature,various biomimetic materials have been synthesized for enhanced mechanical properties,among which composites with brick-and-mortar structures attract the most *** such bio-inspired composites,the matrix layer mainly functions to transfer load between bricks through shearing,while the shear stress in the matrix is not uniform but highly concentrated on the interface ends,which tends to initiate cracks and evoke interface delamination in *** enhance the composites’resistance to interface delamination,we propose to homogenize the shear stress by adopting a matrix with a gradient modulus.A theoretical solution to the optimal gradient modulus of the matrix layer is obtained,followed by computational ***,composites with such functionally graded matrices are further demonstrated to possess higher elastic limits,higher resilience,and flaw tolerance than the uniform *** results of this paper should be of great value to the design and synthesis of advanced structural materials for superior mechanical performance.

摘要：Solid solution-strengthened copper alloys have the advantages of a simple composition and manufacturing process,high mechanical and electrical comprehensive performances,and low cost;thus,they are widely used in high-speed rail contact wires,electronic component connectors,and other *** the contradiction between low alloying and high performance is an important challenge in the development of solid solution-strengthened copper *** the typical solid solution-strengthened alloy Cu-4Zn-1Sn as the research object,we proposed using the element In to replace Zn and Sn to achieve low alloying in this *** new alloys,Cu-1.5Zn-1Sn-0.4In and Cu-1.5Zn-0.9Sn-0.6In,were designed and *** total weight percentage content of alloying elements decreased by 43%and 41%,respectively,while the product of ultimate tensile strength(UTS)and electrical conductivity(EC)of the annealed state increased by 14%and 15%.After cold rolling with a 90%reduction,the UTS of the two new alloys reached 576 and 627MPa,respectively,the EC was 44.9%IACS and 42.0%IACS,and the product of UTS and EC(UTS×EC)was 97%and 99%higher than that of the annealed state *** dislocations proliferated greatly in cold-rolled alloys,and the strengthening effects of dislocations reached 332 and 356 MPa,respectively,which is the main reason for the considerable improvement in mechanical properties.

摘要：Wearable bioelectronic devices have the capacity for real-time human health monitoring,the provision of tailored services,and natural interaction with smart ***,these wearable bioelectronic devices rely on conventional rigid batteries that are frequently charged or replaced and are incompatible with the skin,leading to a discontinuity in complex therapeutic tasks related to human health monitoring and human-machine *** triboelectric nanogenerator(TENG)is a high-efficiency energy harvesting technology that converts mechanical into electrical energy,effectively powering wearable bioelectronic *** study comprehensively overviews recent advances in stretchable TENG for use in wearable bioelectronic *** working mechanism of stretchable TENG is initially explained.A comprehensive discussion presents the approaches for fabricating stretchable TENG,including the design of stretchable structures and the selection of stretchable ***,applications of wearable bioelectronic devices based on stretchable TENG in human health monitoring(body movements,pulse,and respiration)and human-machine interaction(touch panels,machine control,and virtual reality)are ***,the challenges and developmental trends regarding wearable bioelectronic devices based on stretchable TENG are elaborated.

摘要：The infamous type Ⅳ failure within the fine-grained heat-affected zone (FGHAZ) in G115 steel weldments seriously threatens the safe operation of ultra-supercritical (USC) power *** this work,the traditional thermo-mechanical treatment was modified via the replacement of hot-rolling with cold rolling,i.e.,normalizing,cold rolling,and tempering (NCT),which was developed to improve the creep strength of the FGHAZ in G115 steel *** NCT treatment effectively promoted the dissolution of preformed M_(23)C_(6)particles and relieved the boundary segregation of C and Cr during welding thermal cycling,which accelerated the dispersed reprecipitation of M_(23)C_(6) particles within the fresh reaustenitized grains during post-weld heat *** addition,the precipitation of Cu-rich phases and MX particles was promoted evidently due to the deformation-induced *** a result,the interacting actions between precipitates,dislocations,and boundaries during creep were reinforced *** this strategy,the creep rupture life of the FGHAZ in G115 steel weldments can be prolonged by 18.6%,which can further push the application of G115 steel in USC power plants.

摘要：A novel multicomponent high-Cr CoNi-based superalloy with superior comprehensive performance was prepared,and the evaluation of its high-temperature microstructural stability,oxidation resistance,and mechanical properties was conducted mainly using its cast polycrystalline *** results disclosed that the morphology of theγ′phase remained stable,and the coarsening rate was slow during the long-term aging at 900–1000℃.The activation energy forγ′precipitate coarsening of alloy 9CoNi-Cr was(402±51)kJ/mol,which is higher compared with those of CMSX-4 and some other Ni-based and Co-based ***,there was no indica-tion of the formation of topologically close-packed phases during this *** these factors demonstrated the superior microstructural stability of the *** mass gain of alloy 9CoNi-Cr was 0.6 mg/cm^(2) after oxidation at 1000℃ for 100 h,and the oxidation resistance was comparable to advanced Ni-based superalloys CMSX-4,which can be attributed to the formation of a continuous Al_(2)O_(3) protective ***,the compressive yield strength of this cast polycrystalline alloy at high temperatures is clearly higher than that of the conventional Ni-based cast superalloy and the compressive minimum creep rate at 950℃ is comparable to that of the conventional Ni-based cast superalloy,demonstrating the alloy’s good mechanical properties at high *** is partially because high Cr is bene-ficial in improving theγandγ′phase strengths of alloy 9CoNi-Cr.

摘要：Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in *** glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose *** technology is less invasive,yet microneedle adhesion with skin tissue is *** this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in *** microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle *** to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into *** MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation ***,the MASA was integrated into a monitoring system using custom *** work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

摘要：Flexible light-emitting fibers and fabrics serve to bridge human–machine interactions. The desire for practical applications and the commercialization of flexible light-emitting fibers has accelerated structural progress and improvements. This review focuses on the structural design of light-emitting fibers and fabrics, starting with a summary of design principles, emission mechanisms, and structural evolution of coaxial structured light-emitting fibers. Subsequently, we explore recent advances in the helical structure design strategies that boost the mechanical sensitivity of light-emitting fibers. Following that, we analyze continuous preparation processes and the development of large-area intelligent light-emitting fabrics based on interwoven structures. Examples based on stiff and rigid inorganic-based lightemitting diodes integrated into flexible systems are also presented. Finally, we discuss the current challenges and future opportunities for light-emitting applications in the field of wearable and smart devices.