摘要：Using total suspended solid （TSS） removal efficiency and hydraulic retention time （HRT） as design parameters a design guideline of a settling basin in a constructed wetland （CW） was suggested; as well as management of sediment and particle in the settling basin. The CW was desiEned to treat the piggery wastewater effluent from a wastewater treatment plant during dry days and stonnwater runoff from the surrounding paved area during wet days. The first settling basin （FSB） in the CVV was theoretically designed with a total storage volume （TSV） of 453 ms and HRT of 5.5 hr. The amount of sediment and particles settled at the FSB was high due to the sedimentation and interception of plants in the CVV. Dredging of sediments was performed when the retention rate at the FSB decreased to approximately 80%. Findings showed that the mean flow rate was 21.8 m3/hr less than the designed flow rate of 82.8 m3/hr indicating that the FSB was oversize and operated with longer HRT （20.7 hr） compared to the design HRT. An empirical model to estimate the length of the settling basin in the CW was developed as a function of HRT and desired TSS removal efficiency. Using the minimum tolerable TSS removal efficiency of 30%, the length of the FSB was estimated to be 31.2 m with 11.8 hr HRT.

摘要：In order to monitor deformation of high temperature components for a long time,a sensing device integrating a bridge-shaped mechanical displacement amplifier has been *** sensing device has higher resolution and accuracy than conventional ***,the relation between the magnification ratio and the structure size of the displacement amplifier is a bottleneck of sensing device *** this,the magnification ratio of a mechanical displacement amplifier is analytically derived based on its geometry *** prototypes of the displacement amplifier made in propathene are manufactured,and an experimental system is set up to validate the accuracy of the established magnification ratio *** magnification ratios and experimental magnification ratios are compared and agree well,which verifies that the proposed equation is *** analytical equation provides an effective design method for bridge-shaped mechanical displacement amplifiers with an expected magnification ratio.

摘要：Atmospheric oxygen (O_2 ) is the most crucial element on earth for the aerobic organisms that depend on it to release energy from carbon-based macromolecules. This is the first study to systematically analyze the global O_2 budget and its changes over the past 100 years. It is found that anthropogenic fossil fuel combustion is the largest contributor to the current O_2 deficit, which consumed 2.0 Gt/a in 1900 and has increased to 38.2 Gt/a by 2015. Under the Representative Concentration Pathways (RCPs) RCP8.5 scenario, approximately 100Gt (gigatonnes) of O_2 would be removed from the atmosphere per year until 2100,and the O_2 concentration will decrease from its current level of 20.946%to 20.825%. Human activities have caused irreversible decline of atmospheric O_2 . It is time to take actions to promote O_2 production and reduce O_2 consumption.

摘要：为探究小跨度隧洞围岩在不同应力路径下的破坏机制,依据现场工况设计相似模型试验可以直观了解围岩的破坏过程,同时数值模拟技术为洞悉岩体内部的破坏机理提供了可视化手段。本文依托某隧洞工程设计了相似模型的加、卸荷破坏试验,并利用颗粒流分析软件PFC进行数值仿真。对比宏、细观两种尺度下的试验发现,隧洞两侧直墙中部岩体的切向应力峰值最低,该处易受拉破坏。拱肩和拱脚处的围岩因应力集中而松动,该处产生的裂隙与直墙处裂隙贯通后将岩体切割成块是隧洞破坏的主要形式。开挖卸荷的应力路径下,隧洞整体的承载能力更强,但破坏时剥落的岩体更加破碎,围岩的损伤深度更大且内部剪切裂纹占比更多,最终形成的破坏面接近“V”型,同时开挖卸荷还会形成开挖扰动区,使拱顶和拱底处岩体的切向应力峰值降低,部分岩体的承载能力下降。

摘要：Hyperthermia has been considered as a promising healing treatment in bone regeneration. We designed a tissue engineering hydrogel based on magnetic nanoparticles to explore the characteristics of hyperthermia for osteogenic regeneration. This nanocomposite hydrogel was successfully fabricated by incorporating magnetic Fe_3O_4 nanoparticles into chitosan/polyethylene glycol(PEG) hydrogel, which showed excellent biocompatibility and were able to easily achieve increasing temperatures under an alternative magnetic field(AMF). With uniformly dispersed nanoparticles, the composite hydrogel resulted in high viability of mesenchymal stem cells(MSCs), and the elevated temperature contributed to the highest osteogenic differentiation ability compared with direct heat treatment applied under equal temperatures. Therefore, the nanoheat stimulation method using the magnetic nanocomposite hydrogel under an AMF may be considered as an alternative candidate in bone tissue engineering regenerative applications.

摘要：Orthogonal Frequency Division Multiplexing(OFDM) is an effective technique to deal with a frequency selective channel since it can convert the channel into some flat fading ***,very different output SNR values of the subchannels will lead to poor bit error performance when a linear equalizer and Equal Bit Allocation(EBA) are adopted in OFDM ***,we proposed three novel nonlinear Joint Transceiver(JT) schemes based on Zero-Forcing(ZF) criterion and Minimum Mean Square Error(MMSE) criterion respectively,which can transform all subchannels of an OFDM system into subchannels with identical channel ***,EBA is equivalent to the Optimum Bit Allocation(OBA) for these *** analysis helps us to obtain the theoretical approximate BER values of the JT *** results verify the numerical analysis and confirm that the performance of our proposed JT scheme greatly outperforms the traditional linear equalizer with EBA at moderate and high SNR values.

摘要：开发钙钛矿叠层太阳电池是一种可以突破单结太阳电池Shockley-Queisser极限的光伏技术.令人鼓舞的是,所有钙钛矿叠层器件,包括钙钛矿/硅、钙钛矿/钙钛矿、钙钛矿/铜铟镓硒和钙钛矿/有机叠层电池,都表现出比相应单结太阳电池更高的效率,显示出巨大的进一步突破的潜力.在叠层器件中,电荷传输材料是钙钛矿子电池的重要组成部分,它直接决定了器件的电荷传输和能量损失.一般来说,高导电性和透光性、良好的能级和化学稳定性是电荷传输材料叠层应用的关键.迄今为止,导电金属氧化物、有机分子、聚合物、富勒烯、自组装材料等各种电荷传输材料已被广泛应用于高效叠层电池.在本文中,我们首先总结了不同类型钙钛矿叠层电池的电荷传输材料的最新进展,详细讨论了材料的电学和光学性质及其对器件性能的影响.在此基础上,我们提出了叠层电池中电荷传输材料进一步发展所面临的挑战和展望.本综述将为不同钙钛矿叠层太阳电池的器件设计提供有效指导.

摘要：过滤有限的词长度(FWL ) 为线性分离时间的系统影响的问题的 nonfragile H 在这份报纸被调查。要设计的过滤器被假定与添加剂获得变化，它在过滤器实现上反映 FWL 效果。结构化的顶点隔板的一个观点被建议处理这个问题并且利用了以一套线性矩阵不平等(LMI ) 为 nonfragile H 过滤器设计开发足够的条件。设计使扩充系统变为 asymptotically 稳定并且保证 H 变细水平不到规定水平。一个数字例子被给说明建议方法的效果。

摘要：未来活动通讯系统瞄准提供很高的数据传播率，甚至在象高速度的车轮轨道火车，磁悬浮火车火车，高速公路车辆，飞机，指导导弹或太空船那样的高活动性的情形。一个特别地重要的商业应用程序是对高速度的宽带的强壮、增加的世界范围的要求无线通讯(多达 574.8 ? km/h 测试速度或 380 ? km/h 广告速度)为象为旅客的机载的娱乐服务那样的应用程序在铁路，提供的数据，声音和录像满足，火车控制，训练派遣，火车传感器地位处理和监视。在如此的高活动性的情形，有很多通讯挑战，包括快移交，更新的地点，当模特儿的高速度的隧道，评价和均等， anti-Doppler 传播技术，快力量控制，和奉献网络建筑学。因为在很高速度的情形的信号传播将不可避免地经历 s ……

摘要：过渡金属磷化物是电催化设计中的新兴材料,而多元金属磷化物因其能显著提高电催化活性而备受关注.然而,由于不同种类金属前驱物之间水解和缩合速率的差异,当前有关超过两种金属元素和化学计量比精确控制的多元金属磷化物的报道非常少.因此,合理设计多元金属磷化物的组成对提高其催化性能具有重要意义.本工作通过直接磷化二价过渡金属离子氢氧化物的合成策略,制备了能够精确控制化学计量比(x:y:z=(1–10):(1–10):1)的分级结构Co_(x)Ni_(y)Fe_(z)P,其中具有最优组分的Co_(1.3)Ni_(0.5)Fe_(0.2)P在析氧反应(OER)中展示了优异的催化活性和高稳定性.密度泛函理论计算表明,相对于其他组分的过渡金属磷化物,Co_(1.3)Ni_(0.5)Fe_(0.2)P在费米能级附近的态密度明显增加,这可以增强催化剂对OH−的吸附,从而提升OER性能.