摘要：Homogeneous redox mediation is efficient in alleviating the shuttling effect and slow redox kinetics of lithium polysulfides in lithium-sulfur ***,their perfect performance is not fulfilled owning to the fact that the multi-step transformation of lithium polysulfides requests the multifunctional active positions for the tandem *** on the redox comediation principles,a promoter of mixing organodiselenide and organoditelluride(mixed-Se/Te)was raised to induce tandem catalysis and boost the effective electrochemical conversion of lithium *** specifically,diphenyl diselenide facilitated the liquid-liquid and solid-liquid transformation between lithium polysulfides and sulfur,while diphenyl ditelluride improved the solid-liquid transformation concerning lithium sulfide ***,even under high sulfur loading of 6.5 mg cm^(−2) and low electrolyte/sulfur ratio of 5.88μL mg^(−1),the 10 mM low concentration mixed-Se/Te promoter offered a high discharge capacity of 6.6 mAh cm^(−2) and high rate performance of 4.1 mAh cm^(−2) at 0.5 ***,the assembled 1.5 Ah-level lithium-sulfur pouch cells provide an energy density of 332 Wh kg^(−1) at 0.05 C and good cycling *** research demonstrates the applicability of propelling continuous sulfur conversion reactions with detached active positions and is anticipated to stimulate deep molecular design of kinetic promoter to targeted energy-associated redox reactions.

摘要：Coal gasification fine slag(FS)is a typical solid waste generated in coal *** current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological *** recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental *** structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of *** this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle *** reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is *** methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the *** design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the *** high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization *** review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the e

摘要：This paper focuses on synthesizing a mixed robust H_2/H_∞ linear parameter varying（LPV） controller for the longitudinal motion of an air-breathing hypersonic vehicle via a high order singular value decomposition（HOSVD） *** design of hypersonic flight control systems is highly challenging due to the enormous complexity of the vehicle dynamics and the presence of significant *** by recent results on both LPV control and tensor-product（TP） model transformation approach,the velocity and altitude tracking control problems for the air-breathing hypersonic vehicle is reduced to that of a state feedback stabilizing controller design for a polytopic LPV system with guaranteed *** controller implementation is converted into a convex optimization problem with parameterdependent linear matrix inequalities（LMIs） constraints,which is intuitively tractable using LMI control ***,numerical simulation results demonstrate the effectiveness of the proposed approach.

摘要：Warp is a nonlinear viscoelastic material. The loom efficiency was reduced considerably by the increase of the frequency of weak places in the warp. Warp should vibrate with low-frequency to reduce the friction times. The objective of this research was to establish the transverse/longitudinal vibration differential equations of warp and analyze the fluctuation process of warp movement by nonlinear method. Based on variable separation method, the time variable was separated from space variable, and the numerical solutions of vibration equations were obtained by the fourth-order Runge-Kutta method. Finally, the influencing factors and variable trends on warp vibration were discussed. The methods on control warp vibration were introduced, which could guide the engineering practice. The most important way to reduce warp vibration is quick adjustment of warp tension.

摘要：To achieve sufficient air conditioning of large buildings,reasonable air distribution in indoor spaces is an effective method for creating stratified air ***,optimizing the air distribution in large buildings is extremely *** this paper,we expound on a new method for air distribution design and optimization based on target value evaluation and summarize the relevant design processes based on an orthogonal test and by decoupling the effects of the size of the tuyere,airflow temperature,air-supply angle and velocity on air ***,we present a design *** optimize the distribution of a lateral air supply in winter,the deflection angle,velocity and temperature of the air supply can be determined in *** the large and tall building types addressed in this paper,the optimal air-supply angle is 2°,the optimal air-supply velocity is 8 m/s,and the optimal air-supply temperature is 19℃.

摘要：Under Type-Ⅱ progressively hybrid censoring, this paper discusses statistical inference and optimal design on stepstress partially accelerated life test for hybrid system in presence of masked data. It is assumed that the lifetime of the component in hybrid systems follows independent and identical modified Weibull distributions. The maximum likelihood estimations(MLEs)of the unknown parameters, acceleration factor and reliability indexes are derived by using the Newton-Raphson algorithm. The asymptotic variance-covariance matrix and the approximate confidence intervals are obtained based on normal approximation to the asymptotic distribution of MLEs of model parameters. Moreover,two bootstrap confidence intervals are constructed by using the parametric bootstrap method. The optimal time of changing stress levels is determined under D-optimality and A-optimality ***, the Monte Carlo simulation study is carried out to illustrate the proposed procedures.

摘要：In order to take into account the computing efficiency and flexibility of calculating transcendental functions, this paper proposes one kind of reconfigurable transcendental function generator. The generator is of a reconfigurable array structure composed of 30 processing elements （PEs）. The coordinate rotational digital computer （CORDIC） algorithm is implemented on this structure. Different functions, such as sine, cosine, inverse tangent, logarithmic, etc., can be calculated based on the structure by reconfiguring the functions of PEs. The functional simulation and field programmable gate array （FPGA） verification show that the proposed method obtains great flexibility with acceptable performance.

摘要：Based on the building principle of additive manufacturing,printing orientation mainly determines the tribological properties of joint *** this study,we created a polyether-ether-ketone(PEEK)joint prosthesis using fused filament fabrication and investigated the effects of printing orientation on its tribological properties using a pin-on-plate tribometer in 25% newborn calf *** ultrahigh molecular weight polyethylene transfer film is formed on the surface of PEEK due to the mechanical capture of wear debris by the 3D-printed groove morphology,which is significantly impacted by the printing orientation of *** the printing orientation was parallel to the sliding direction of friction,the number and size of the transfer film increased due to higher steady *** transfer film protected the matrix and reduced the friction coefficient and wear rate of friction pairs by 39.13%and 74.33%,***,our findings provide a novel perspective regarding the role of printing orientation in designing knee prostheses,facilitating its practical applications.

摘要：Dipoles with Lorentz-type resonant electromagnetic responses can realise negative effective parameters in their negative resonant region. The electric dipole and magnetic dipole can realise, respectively, negative permittivity and negative permeability, so both the field distribution forms of electric and magnetic dipoles are fundamentals in designing left-handed metamaterial. Based on this principle, this paper studies the field distribution in high-permittivity dielectric materials. The field distributions at different resonant modes are analysed based on the dielectric resonator theory. The origination and influence factors of the electric and magnetic dipoles are confirmed. Numerical simulations indicate that by combining dielectric cubes with different sizes, the electric resonance frequency and magnetic resonance frequency can be superposed. Finally, experiments are carried out to verify the feasibility of all-dielectric left-handed metamaterial composed by this means.

摘要：The morphing trailing edge based compliant mechanism is a developing technology which can increase lift-drag ratio for variable flight modes by bending down the trailing *** material design is integrated into topology optimization for the morphing trailing edge based compliant mechanism in the paper.A two-step optimization strategy is established to solve the integrated design ***,lamination parameters are introduced and viewed as a bridge between structure stiffness and fiber angles for composite *** variables include the lamination parameters and element *** least-squares between actual and desired displacements at output points along trailing edge is adopted to evaluate the deformed capability of the trailing *** integrated optimization model for the composite morphing trailing edge is established with the volume *** optimal topologic shape and lamination parameters are initially ***,a least-squares optimization between fiber angles and the optimal lamination parameters is implemented to obtain optimal fiber ***,morphing capability of composites trailing edge based compliant mechanism is investigated by simulation and *** results indicate the composites trailing edge based compliant mechanism can approximately bend down 8 degrees and satisfies the design requirement.