摘要：high-speed high-resolution analog-to-digital （A/D） conversion demanded by ultra wideband （UWB） signal processing is a very challenging problem. This paper proposes a parallel random projection method for UWB signal acquisition. The proposed method can achieve high sampling rate, high resolution and technical feasibility of hardware implementation. In the proposed method, an analog UWB signal is projected over a set of random sign functions. Then the low-rate high-resolution analog-to-digital convertors （ADCs） are used to sample the projection coefficients. The signal can be reconstructed by simple linear calculation with the sampling matrix, without complying with optimization algorithm and prior knowledge. In other aspects, unlike other approaches that need to utilize an accurate time-shift at extremely high frequency, or design a hybrid filter bank, or generate specific basis functions or work for signals with prior knowledge, the proposed method is a universal sampling approach and easy to apply. The simulation results of signal to noise ratio （SNR） and spurious-free dynamic range （SFDR） validate the efficiency of the proposed method for UWB signal acquisition.

摘要：This paper presents a new stabilizing control law for a planar vertical take-off and landing *** model is first transformed into an equivalent form,and then a control law consisting of a linear term and a saturated term is given for a related subsystem,with the saturation levels being assigned as large as *** to the existing saturation scheme in which all states are restricted by saturations,the design brings about a relatively fast *** effectiveness and advantage of the design are validated by numerical simulations.

摘要：The problem of fault detection for linear discrete timevarying systems with multiplicative noise is dealt *** using an observer-based robust fault detection filter（FDF） as a residual generator,the design of the FDF is formulated in the framework of H ∞ filtering for a class of stochastic time-varying systems.A sufficient condition for the existence of the FDF is derived in terms of a Riccati *** determination of the parameter matrices of the filter is converted into a quadratic optimization problem,and an analytical solution of the parameter matrices is obtained by solving the Riccati *** examples are given to illustrate the effectiveness of the proposed method.

摘要：A series of novel 5-sulfoxide-substituted pyrazolo[5,1-d] [1,2,3,5]tetrazin-4（3H）ones 4a-j were designed and efficiently synthesized via a diazotization of 5-amine-3-methylsulfinyl- 1H-pyrazole, followed by cycloaddition with aryl isocyanate. A possible reaction mechanism is outlined and discussed. These new compounds exhibit some biological activity as preliminary bioassay indicated. Their structures were confirmed with ^1H NMR, IR and elemental analysis.

摘要：A new circuit model for designing and manufacturing an S-band low noise amplifier(LNA) with the software,Advanced Design System(ADS),is introduced in this *** proposed model involves shunted impedance at the grid to achieve a stable LNA without measuring the S-parameters of transistors at low *** LNA was measured over the operation band of 2.2-2.3 GHz,which has input and output standing wave ratios below *** noise figure of the manufactured LNA was about 0.2 dB and the gain was above 22 dB,which indicated that our LNA worked well at 77 K.

摘要：In order to find out the optimal press bend forming path in fabricating aircraft integral panels, this article proposes a new method on the basis of the authors＇ previous work. It is composed of the finite element method （FEM） equivalent model, the surface curvature analysis, the artificial neural network response surface and the genetic algorithm. The method begins with analyzing the objective＇s shape curvature to determine the bending position. Then it optimizes the punch travel at each bending position by the following steps： （1） Establish a multi-step press bend forming FEM equivalent model, with which the FEM ex- periments designed with the Taguchi method are performed. （2） Construct a back-propagation （BP） neural network response surface with the data from the FEM experiments. （3） Use the genetic algorithm to optimize the neural network response surface as the objective function. Finally, this method is verified by press bending a complicated double-curvature grid-type stiffened panel and bears out its effectiveness and intrinsic worth in designing the press bend forming path.

摘要：To gain a deep insight into the hot drawing process of aluminum alloy sheet, simulations of cylindrical cup drawing at elevated temperatures were carried out with experimental validation. The influence of four important process parameters, namely,punch velocity, blank holder force(BHF), friction coefficient and initial forming temperature of blank on drawing characteristics(*** thickness and thickness deviation) was investigated with the help of design of experiments(DOE), analysis of variance(ANOVA) and analysis of mean(ANOM). Based on the results of ANOVA, it is shown that the blank holder force has the greatest influence on minimum thickness. The importance of punch velocity for thickness deviation is 44.35% followed by BHF of 24.88%,friction coefficient of 15.77% and initial forming temperature of blank of 14.995%. After determining the significance of each factor on forming characteristics, how the individual parameter affects characteristics was further analyzed by ANOM.

摘要：Proxy signature is an active cryptographic research area, and a wide range of literatures can be found nowadays suggesting improvement and generalization of existing protocols in various directions. However, from the efficiency view, many proposed proxy signature schemes in these literatures are not satisfying and cannot fit to the mobile communication. Therefore, there is a desire to design efficient proxy signature schemes. Based on Boneh et al＇s pairing-based short signature, this paper presents two proxy signature schemes. One is proxy-protected signature scheme, and the other is proxy aggregate signature scheme. Since both of them can achieve high efficiency, it is believed that they are specially suitable for mobile communication environment.

摘要：The position decoding accuracy and the spatial resolution of positron emission tomography detectors are greatly influenced by the performance of the two-dimensional position map,including the gain uniformity of photomultiplier tube (PMT),the baseline offset of the PMT signals and the accuracy of analogue to digital converter (ADC).In this work,a PMT-quadrant sharing detector was *** data acquisition platforms are employed to conduct the influence factors on the two-dimensional position map performances,one was that the waveforms of the PMT signals were scanned by the sequence acquisition mode based on the oscilloscope of LeCroy waveRunner 204MXi-A,and another was a self-developed high speed ADC data acquisition *** show that the event decoding positions were concentrated on the PMT with higher gain,the position map was distorted at the baseline offset of signal,and the cross-line artifacts were caused by the insufficient ADC sampling bit for a larger size position *** the parameters need be adjusted properly to stabilize a real system,and the flexible oscilloscope platform can be used to design the detector block and the other platform with high ADC ***,the electrical circuit with a proper ADC accuracy adjusts the PMT gains and baseline offsets.

摘要：We deal with the state consensus problem of a general Linear Interconnected Multi-Agent System （LIMAS） under a time-invariant and directed communication topology. Firstly, we propose a linear consensus protocol in a general form, which consists of state feedback of the agent itself and feedback form of the relative states between the agent and its neighbors. Secondly, a state-linear-transformation is applied to equivalently transform the state consensus problem into a partial stability problem. Based on the partial stability theory, we derive a sufficient and necessary criterion of consensus convergence, which is expressed via the Hurwitz stability of a real matrix constructed from the parameters of the agent models and the protocols, and present an analytical formula of the consensus function. Lastly, we propose a design procedure of the gain matrices in the protocol by solving a bilinear matrix inequality.