摘要：This paper describes an analysis of the match between the module learning outcomes and the programme learning outcomes of the MSc in Assistive Technology offered by the School of Computing. The contribution of each MSc module to the overall programme learning outcomes was assessed using a Module Matrix. An overall Master Matrix was used to assess the overall contribution of all 16 modules to the programme learning outcomes of the MSc programme. The analysis of the MSc programme design was taken a stage further by graphing the learning outcomes of the overall programme against the individual module learning outcomes. This provided a useful tool for analysis of the MSc programme. The approach outlined in this paper provides a visualisation tool that allows the programme designer to quickly identify the deficiencies and excesses in the relationships between programme learning outcomes and module learning outcomes.

摘要：针对大中型水电站地面厂房振动特性分析复核和抗震设计,以地处高地震区的某水电站地面厂房为例,利用有限单元法建立数值模型,分析了厂房结构的整体动力特性。因厂房上部为单层框架结构,刚度相对较低,本文重点分析了其自振特性和与机组振源的共振复核,对以动态优化设计为目标的结构修改进行了探讨,并就机墩结构的刚度和强度进行了计算分析和振幅复核。最后对厂房结构的抗震问题进行了研究,所得结论可为大中型水电站地面厂房结构的抗振设计提供有益参考。

摘要：利用集团分离分析法(Bulked segregant analysis BSA),以辣椒细胞质雄性不育系BU-12、恢复系RF-12为材料共筛选了336条RAPD引物,其中引物S418在恢复系中呈现特异性扩增,得到一条约3000bp的特异片段。回扩得到两条片段,测序表明大小为1515bp,1162bp。荧光原位杂交证实1515bp片段为恢复系特有,命名为S418_(1515)。序列分析表明S418_(1515)为一新发现的序列,Blastn序列比对同源性小于40%,tBlastx比对发现该序列与水稻2、4、7、10号染色体的几个BAC克隆上的序列高度同源。推测可能与其具有相似的编码功能,为进一步从分子水平研究辣椒育性恢复打下了坚实的基础。根据测序结果设计特异引物,将S418_(1515)转化成特异PCR标记,证明能用于候选材料的初筛。

摘要：首先介绍了雷达电子机箱的两种设计方案。针对外肋片冷却型机箱,进行了其冷板肋片的换热计算,并对机箱和通过传导换热的印制板插件进行了热仿真分析,讨论了锁紧条、导电衬垫以及功率芯片的布局对散热的影响;同时对内肋片冷却型机箱和通过对流换热的电源模块进行了换热计算和热仿真分析。

摘要：针对睢宁二站分离式泵站特点,采用非线性有限元ADINA软件,建立了睢宁泵站的结构地基水体三维有限元动力分析模型,分析比较了正常抽水状态下两个设计方案泵房结构的动力特性,运用流固耦合及时程分析方法分析了泵房结构在8度(0.3g)地震时的动力响应,给出了推荐方案。研究结果可为工程设计施工提供参考依据。

摘要：In the present study, we aimed to investigate the effects of key extraction parameters including extraction time（10–20 min）, extraction temperature（30–60 °C）, ultrasonic power（60–90 W） and solvent-to-solid（S/S） ratio（10–30 m L/g） on yield of celastrol from Celastrus monospermus Roxb. To optimize the conditions, we investigated the effects of parameters on the ultrasound assisted extraction（UAE） with the Box-Behnken Design（BBD）, one widely used form of Response Surface Methodology（RSM）. In all tested solvents, ethanol was the most effective for celastrol extraction, followed by methanol, ethanol, ethyl acetate, n-butanol and water. A second order polynomial model was fitted well to the extraction experimental data with R2 of 0.9928. Extraction yield of 3.116 mg/g was obtained for celastrol under the optimized extraction conditions of extraction time（20 min）, extraction temperature（46 °C）, ultrasonic power（60 W） and S/S ratio（30 m L/g）. Experimental validation was performed, and the experimental values agreed well with the predicted values. The results indicated that the UAE was good extraction material for celastrol from C. monospermus Roxb.

摘要：The physics design of a 3 MeV, 30 mA, 352.2 MHz Radio Frequency Quadrupole (RFQ) is done for the future Indian Spallation Neutron Source (ISNS) project at RRCAT, India. The beam dynamics design of RFQ and the error analysis of the input beam parameters are done by using standard beam dynamics code PARMTEQM. The electromagnetic stu-dies for the two-dimensional and three-dimensional cavity design are performed using computer codes SUPERFISH and CST Microwave Studio. The physics design of RFQ consisting of the beam dynamics design near the beam axis and the electromagnetic design for the RFQ resonator is described here.

摘要：Integrated computational materials engineering (ICME) is an emerging discipline that can speed up product development by unifying material, design, fabrication, and computational power in a virtual environment. Developing and adapting ICME in industries is a grand challenge technically and culturally. To help develop a strategy for development of this new technology area, an ICME approach was proposed and implemented in optimizing thin welded structure design. The key component in this approach is a database which includes material properties, static strength, impact strength, and failure parameters for a weld. The heat source models, microstructure model, and thermo-mechanical model involved in ICME for welding simulation were discussed. The shell elements representing method for a fusion weld were introduced in details for a butt joint, lap joint, and a Tee joint. Using one or multiple solid elements representing a spot weld in a shell model was also discussed. Database building methods for resistance spot welding and fusion welding have been developed.

摘要：自2000年起,笔者开始关注流行于甘肃省会宁县丁沟乡南门村的眉户戏演出,并以南门村徐川社的"演出团体"为主要研究对象。通过自己的观察、参与,可以看出它发挥的功能在日渐减小,和我国其他民间文化一样,存在着走向衰亡的危机。

摘要：根据功率超声振动车削的加工特点,在原有设备的基础上,改进并设计了适于镁铝合金加工的纵向超声振动车削装置,该装置由压电换能器、复合变幅杆、换能器外壳、刀具、刀具安装部分和装置安装部分组成,并对变幅杆和整个装置系统进行模态分析,得到变幅杆和整个装置系统的共振频率分别为21.611KHz和18.236KHz,分析结果符合设计要求,为进一步实验打下了基础。