摘要：The combined use of guided tissue/bone regeneration(GTR/GBR)membranes and bone filling grafts represents a classical therapy for guiding the regeneration and functional reconstruction of oral soft and hard ***,due to its displacement and poor mechanical support,bone meal is not suitable for implantation in the case of insufficient cortical bone support and large dimensional *** combination of GTR/GBR membrane with a three-dimensional(3D)porous scaffold may offer a resolution for the repair and functional reconstruction of large soft and hard tissue *** this study,a novel integrated gradient biodegradable porous scaffold was prepared by bonding a poly(lactic-co-glycolic acid)(PLGA)/fish collagen(FC)electrospun membrane(PFC)to a 3D-printed PLGA/nano-hydroxyapatite(HA)(PHA)*** consistency of the composition(PLGA)ensured strong interfacial bonding between the upper fibrous membrane and the lower 3D *** vitro cell experiments showed that the PFC membrane(upper layer)effectively prevented the unwanted migration of L929 *** in vivo investigations with an oral soft and hard tissue defect model in beagles revealed that the integrated scaffold effectively guided the regeneration of defective oral *** results suggest that the designed integrated scaffold has great potential for guiding the regeneration and reconstruction of large oral soft and hard tissues.

摘要：Current electro spun membranes used for pulp capping still lack the sustained-release capability and long-term anti-inflammatory effects that are favorable for dental pulp *** this work,a single-layered poly(lac tic acid)(PLA)electro spun membrane loaded with amorphous calcium phosphate(ACP)and aspirin(PLA/ACP/Aspirin membrane,i.e.,PA A membrane)is sandwiched between two poly(lactic-co-glycolic acid)(PLGA)electro spun membranes as a novel sandwich-structured PLGA and PA A composite electro spun membrane(PLGA-PAA membrane)to resolve the need for sustained-release design and anti-inflammatory *** angle measurements indicate that the PLGA-PAA membrane is more hydrophilic than the PAA *** in vitro release study reveals that PLGA membranes coated on PAA membrane could slightly slow down ion release,while signiificantly prolonging aspirin *** also co-cultured membranes with dental pulp stem cells(DPSCs)and human monocytic THP-1 cells to evaluate their osteogenic ability and anti-inflammatory effects,*** with the PAA membrane,the PLGA-PAA membrane promotes cell adhesion,proliferation,and osteogenic differentiation.A prolonged anti-inflammatory effect of up to 18 days is also observed in the PLGA-PAA *** results suggest a promising strategy for fabricating an electro spun membrane system with controlled release capabilities and long-term anti-inflammatory effects for use as pulp-capping material for regeneration of the dentin-pulp complex.

摘要：Long-term air contamination and pollution challenges in particulate matter(PM) have raised fervent concerns for public health, e.g., the PM physical damage or the bacteria and virus carried by the PM. The desired air filter, seeking both high filtration efficiency and low pressure drop remains challenging. Here, we report a bio-inspired spindle-knot halloysite nanotube microsphere-incorporated nanofiber(HNM-NF) filter with the assembly and shape structures of the spider silk. The resulting HNM-NFs exhibit integrated properties of high surface energy, hydrophilicity and strong PM capture. The spindle-knot structures could shrink the outer pore size on two-dimensional(2 D) surface and construct the fluffy 3 D reticular architecture, facilitating high-efficiency air pollutant capture(>85.0%) while maintaining low resistance to airflow(~39 Pa). The spindle-knot construction method was applicable to various materials(i.e.,Al_(2)O_(3), ZnO and TiO_(2)) and volume production of the microsphere-incorporated NF cartridge. The diversified spindleknot construction will be valuable for adapting to meet different filtration requirements.

摘要：Inspired by the constitution of things in the natural world,three-dimensional (3D)nanofiber scaffold/cells complex was constructed via the combination of electrospinning technology and origami *** nanofiber boxes prepared by origami provided a limited space for the layer-by-layer nanofiber films,and the human fetal osteoblasts (hFOBs)seeded on the both sides of the nanofiber films were expected to facilitate the bonding,of the adjacent nanofiber films through the secretion of extracellular ***,the hFOBs presented 3D distribution in the nanofiber scaffold,and they can stretch across the gaps between the adjacent nanofiber films,forming the cell layers and filling the whole 3D nanofiber ***,a 3D block composed of electrospun nanofiber scaffold and cells was obtained',which possesses potential applications in bone tissue ***,we also created 3D nanofiber structures that range from simple forms to intricate architectures via origami,indicating that the combination of electrospinning technology and origami techniques is a feasible method for the 3D construction of tissue engineering scaffolds.

摘要：Hierarchically structured nanomaterials have attracted much attention owing to their unique *** this study,TiO2 nanofibers assembled from nanosheets(TiO2-NFs-NSs)were fabricated through electrospinning technique,which was followed by hydrothermal treatment in NaOH *** effect of hydrothermal reaction time(0-3 h)on the structure and properties of TiO2 nanofibers(TiO2-NFs)was systematically studied,and TiO2-NFs was evaluated in terms of the photocatalytic activity toward photocatalytic oxidation of acetone and the photoelectric conversion efficiency of dye-sensitized solar *** was found that(1)hydrothermal treatment of TiO2-NFs in NaOH solution followed by acid washing and calcination results in the formation of TiO2-NFs-NSs;(2)upon extending the hydrothermal reaction time from 0 h to 3 h,the BET surface area of TiO2-NFs-NSs(T3.0 sample)increases 3.8 times(from 28 to 106 m2 g^-1),while the pore volume increases 6.0 times(from 0.09 to 0.54 cm3 g^-1);(3)when compared with those of pristine TiO2-NFs(T0 sample),the photoreactivity of the optimized TiO2-NFs-NSs toward acetone oxidation increases 3.1 times and the photoelectric conversion efficiency increases 2.3 *** enhanced photoreactivity of TiO2-NFs-NSs is attributed to the enlarged BET surface area and increased pore volume,which facilitate the adsorption of substrate and penetration of gas,and the unique hollow structure of TiO2-NFs-NSs,which facilitates light harvesting through multiple optical reflections between the TiO2 nanosheets.

摘要：electrospinning has attracted tremendous attention in the design and preparation of 1D nanostructured electrode materials for lithium-ion batteries(LIBs)and sodium-ion batteries(NIBs), due to the versatility and facility. In this review, we present a comprehensive summary of the development of electrospun electrode nanomaterials for LIBs and NIBs, and a brief introduction about electrode materials beyond LIBs and NIBs. By summarizing various electrochemical active materials, this review focuses on the evolution in structures and the constitution of electrospun electrode materials. In detail, a variety of electrospun anode and cathode materials of LIBs and NIBs have been properly discussed, respectively. Finally, the current progress in the electrospun electrode materials is well reviewed and the development direction is also pointed out. We believe that in the nearly future, electrospun electrode materials would be applied in commercial LIBs and promote the advance in NIBs. And we hope that this review could be helpful in the design and fabrication of electrospun hierarchical materials for other advanced energy-storage devices.

摘要：A new type of vascular stent is designed for treating stenotic vessels. Aiming at overcoming the shortcomings of existing equipment and technology for preparing a bioabsorbable vascular stent （BVS）, a new method which combines 3D bio-printing and electrospinning to prepare the composite bioabsorbable vascular stent （CBVS） is proposed. The inner layer of the CBVS can be obtained through 3D bio- printing using poly-p-dioxanone （PPDO）. The thin nanofiber film that serves as the outer layer can be built through electrospinning using mixtures of chitosan-PVA （poly （vinyl alcohol））. Tests of mechanical properties show that the stent prepared through 3D bio-printing combined with electrospinning is better than that prepared through 3D bio- printing alone. Cells cultivated on the CBVS adhere and proliferate better due to the natural, biological chitosan in the outer layer. The proposed complex process and method can provide a good basis for preparing a controllable drug-carrying vascular stent. Overall, the CBVS can be a good candidate for treating stenotic vessels.

摘要：It has been hypothesized that leaflet substrates with a trilayer structure and anisotropicmechanical properties could be useful for the production of functional and long-lasting tissue-engineered *** investigate the influence of the anisotropic structural and mechanical characteristics of a substrate on cells,in this study,we electrospun trilayer anisotropic fibrous substrates and randomly oriented isotropic fibrous substrates(used as controls)from polycaprolactone ***,the random substrates had higher radial and lower circumferential tensile properties than the trilayer substrates;however,they had similar flexural *** valvular interstitial cells cultured on both substrates produced random and trilayer cell-cultured constructs,*** trilayer cell-cultured constructs had more anisotropic mechanical properties,17%higher cellular proliferation,14%more extracellular matrix(i.e.,collagen and glycosaminoglycan)production,and superior gene and protein expression,suggesting that more cells were in a growth state in the trilayer constructs than in the random ***,the random and radial layers of the trilayer constructs had more vimentin,collagen,transforming growth factor-beta 1(TGF-ß1),transforming growth factor-beta 3(TGF-ß3)gene expression than in the circumferential layer of the *** study verifies that the differences in structural,tensile,and anisotropic properties of the trilayer and random substrates influence the characteristics of the cells and ECM in the constructs.

摘要：A native organ has heterogeneous structures, sirength, and cell components. It is a big challenge to fabricate organ prototypes with controllable shapes, strength, and cells. Herein, a hybrid method is developed to fabricate organ prototypes with controlled cell deposition by integrating extrusion-based 3D printing, electrospinning, and 3D bioprinting. Multi-scale sheets were first fabricated by 3D printing and electrospinning;then, all the sheets were assembled into organ prototypes by sol-gel react io n duri ng bioprinting. With this method, macroscale structures fabricated by 3D printing ensure the customized structures and provide mechanical support, nanoscale structures fabricated by electrospinning offer a favorable environment for cell growth, and different types of cells with controllable densities are deposited in accurate locations by bioprinting. The results show that L929 mouse fibroblasts encapsulated in the structures exhibited over 90% survival within 10 days and maintai ned a high proliferation rate. Furthermore, the cells grew in spherical shapes first and then migrated to the nano scale fibers showing stretched morphology. Additionally, a branched vascular structure was successfully fabricated using the presented method. Compared with other methods, this strategy offers an easy way to simultancously realize the shape control, nanolibrous structures, and cell accurate deposition, which will have potemidi applications in tissue cngineering.

摘要：The electrospinning process was applied to fabricate the nanofibers of biodegradable poly(ε-caprolactone)(PCL) in which different contents of multiwalled carbon nanotubes(MWCNTs) were embedded. Afterward,the electrospun nanofibers were successfully decorated with shish-kebab structure via a self-induced crystallization technique. The topographical features and the mechanical properties of the composite scaffolds were characterized,and the biocompatibility of the material was assessed by using human osteogenic sarcoma osteoblasts(MG-63 cells). The carbon nanotube(CNT) concentration is found to affect the fiber diameter and mechanical properties of electrospun nanofibers and the periodic distance of the shish-kebab architecture. Cellular attachment and proliferation assays reveal that 0.5 wt% CNT-embedded PCL scaffold shows enhanced biocompatibility with MG-63 cells than their counterparts made of neat PCL, and the collagen-like nanotopology provided by the shish-kebab structure further facilitates the cell adhesion and proliferation. The superior interactions between cells and scaffolds demonstrate that the shish-kebab-structured CNTs/PCL nanofibers may be promising candidate for tissue engineering scaffold application.