摘要：A novel assembly control algorithm named burst-size feedback adaptive assembly period （BFAAP） is proposed. The major difference between BFAAP and other similar adaptive assembly algorithms is that the control curve of BFAAP is dynamically adjusted according to the feedback of outgoing burst size. BFAAP is compared with two typical algorithms fixed assembly period （FAP） and min-burst length max- assembly period （MBMAP） in simulation in terms of burst size distribution and assembly period. Moreover, the transmission control protocol （TCP） performance over BFAAP is also considered and simulated.

摘要：In genetic regulatory networks,a stable configuration can represent the evolutionary behavior of cell death or unregulated growth in *** present analytical investigations on output feedback stabilizer design of Boolean networks(BNs)to achieve global stabilization via the semi-tensor product *** on network structure information describing coupling connections among nodes,an output feedback stabilizer is designed to achieve global *** with the traditional pinning control design,the output feedback stabilizer design is not based on the state transition matrix of BNs,which can efficiently determine pinning control nodes and reduce computational *** proposed method is efficient in that the calculation of the state transition matrix with dimension 2^n×2^n is avoided;here n is the number of nodes in a ***,a signal transduction network and a *** segmentation polarity gene network are presented to show the efficiency of the proposed *** are shown to be simple and concise,compared with traditional pinning control for BNs.

摘要：Stabilization of the constrained switched nonlinear systems is an attractive research subject. Predictive control can handle variable constraints well and make the system stable. Its stability is typically based on an assumption of initial feasibility of the optimization problem; however the set of initial conditions, starting from where a given predictive formulation is guaranteed to be feasible, is not explicitly characterized. In this paper, a hybrid predictive control method is proposed for a class of switched nonlinear systems with input constraints and un-measurable states. The main idea is to design a mixed controller using Lyapunov functions and a state observer, which switches appropriately between a bounded feedback controller and a predictive controller, and to give an explicitly characterized set of initial conditions to stabilize each closed-loop subsystem. For the whole switched nonlinear system, a suitable switched law based on the state estimation is designed to orchestrate the transitions between the consistituent modes and their respective controllers, and to ensure the whole closed-loop system's stability. The simulation results for a chemical process show the validity of the controller proposed in this paper.

摘要：This paper proposes an efficient, high-tech method of construction of pseudorandom binary sequences generators with a repetition period 2n?for n-bit shift register with a nonlinear feedback function. The developed method is illustrated by constructing a nonlinear function feedback shift register. It is proved that the offered method requires the realization of a memory size proportional to n2?that allows making successful use of suitable generators for practical use on the shift register of the longer word.

摘要：A difficult but important problem in optimal control theory is the design of an optimal feedback control, i.e., the design of an optimal control as function of the phase (state) coordinates [1,2]. This problem can be solved not often. We study here the autonomous nonlinear system of second order in general form. The constraints imposed on the control input can depend on the phase (state) coordinates of the system. The goal of the control is to maximize or minimize one phase coordinate of the considered system while other takes a prescribed in advance value. In the literature, optimal control problems for the systems of second order are most frequently associated with driving both phase coordinates to a prescribed in advance state. In this statement of the problem, the optimal control feedback can be designed only for special kind of systems. In our statement of the problem, an optimal control can be designed as function of the state coordinates for more general kind of the systems. The problem of maximization or minimization of the swing amplitude is considered explicitly as an example. Simulation results are presented.

摘要：This paper demonstrates wide-band CMOS VCO based on the transformer feedback from traditional circuit to our proposed work. The start up condition of the traditional cross-coupled pair is expressed by the high frequency model. The wide band technique of this structure is derived with the help of the high frequency model of the transistor. Therefore, the wide band CMOS VCO based on the common source transformer feedback topology can achieves the high performance in the low voltage and low phase noise. The measurement result of the VCO exhibits the figure of merit, core power consumption and output power at supply voltage 0.8 V are –193.1 dBc/Hz, 4.4 mW and –2.3 dBm, respectively. The phase noise is –124.3 dBc/Hz at 1 MHz offset under the operation frequency 5.8 GHz. And the tuning range of the circuit can obtain 28%, this VCO is fabricated in TSMC 0.18 μm 1P6MCMOS process.

摘要：Based on the feedback linearization technique, we present a systematic design method for the General Integral Control and a new integral control strategy along with a class of fire-new integrator. By using the linear system theory and Lyapunov method along with LaSalle’s invariance principle, the conditions on the control gains to ensure regionally as well as semi-globally asymptotic stability are provided. Theoretical analysis and simulation results demonstrated that: by using this design method, General Integral Control can deal with nonlinearity and uncertainties of dynamics more effectively;the optimum response can be achieved in the whole control domain, even under uncertain payload and varying-time disturbances. This means that General Integral Control has strong robustness, fast convergence, good flexibility, and then makes the engineers design a high performance controller more easily.

摘要：In this paper, we examine the problem of designing power system stabilizer (PSS). A new technique is developed using particle swarm optimization (PSO) combined with linear matrix inequality (LMI). The main feature of PSO, not sticking into a local minimum, is used to eliminate the conservativeness of designing a static output feedback (SOF) stabilizer within an iterative solution of LMIs. The technique is further extended to guarantee robustness against uncertainties wherein power systems operation is changing continuously due to load changes. Numerical simulation ahs illustrated the utility of the developed technique.

摘要：A description of the Systems Dynamics paradigm is given and the reduced Qualitative System Dynamics (QSD) form explained. A simple example is given to illustrate the diagram construction. The principles of states (levels), rates and feedback loops are outlined. The QSD method is used to address the problem of accessibility by using human control of automation as an example, and applying the QSD method to evaluate the effects of the researcher and user in the de- sign of an accessible artefact. This simple automation model illustrates what can be found out from such a picture, in this indicating how the feedback from users has an influence on the time to deliver such designs.

摘要：A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacitor voltage and maintained by a feedback. The circuit has been fabricated in a standard 0.35 μm AMS CMOS process. Measurement results demonstrated a power-conversion efficiency over 90% with a line regulation of 8%/V for input voltage of 3.3 V and current output between 200 mA and 350 mA.