摘要：The manual design of addendum surfaces on common CAD platforms is very tedious which requires many trialscorrections,which will certainly a ect the construction e ciency and quality of addendum surfaces,and then a ect the formability and quality of the workpiece in the process of sheet *** this paper,an automatic procedure based on parametric design method is proposed for the rapid construction of the addendum *** kernel of the parametric method is constructing boundary curves based on the shape of surfaces of workpiece and designing guide curves based on Hermite curve *** some simple parameters,the shape of the addendum surfaces could be controlled and adjusted *** addition,a minimum energy optimization method is employed to further optimize the constructed addendum surface.A finite element analysis for the sheet forming process is performed to evaluate the forming quality of constructed addendum *** instance illustrates that the addendum surface constructed by the proposed method could ensure both the overall smoothing of surfaces and the final forming quality,and it has a good e ect on springback after *** research proposes a smoothing parametric design method for addendum surfaces construction which could construct and optimize addendum surfaces rapidly.

摘要：Utility of microwave bootlace lens is well established. For broadband and wide scanning network, it is required to op-timize and use features of this lens for better communication and scanning device. This report presents the design of a compact 2D bootlace lens with five focal feed for multiple beam forming. This design will help in reducing phase error and will provide power efficiency and better resolution during target tracking. This design will provide better aperture efficiency and scanning angle.

摘要：以1.5 mm+1.5 mm A6062铝合金为研究对象,结合单一变量设计法进行参数组合,使用Simufact forming有限元软件对铆接过程进行模拟仿真,主要研究了凹模深度、凹模凸台高度、冲头速度3个工艺参数对半空心铆钉自冲铆接成形的影响,及参数对几何特征量的影响趋势,为半空心铆钉自冲铆接工艺参数进一步优化提供有益的借鉴。

摘要：From the point of translation from liquid to amorphous phase, a new approach for composition design of bulk metallic glasses (BMGs) was suggested based on the stability estimations of liquid and amorphous phases. Gibbs free energy (△G) of liquid phase, which can be calculated approximately using mixing enthalpy (△Hmix) and configuration entropy (Sconfig), was taken as a stability criterion of liquid phase. On the other hand, vacancy formation energy (△Hh) was used to evaluate the stability of amorphous phase due to the linear relationship between △Hh and crystallization temperature (Tx). Based on these two sides, new Cu-Zr-Nd bulk metallic glasses were designed and synthesized successfully by suction-casting into copper mold. Experimental results about glass-forming ability are consistent with the computational values, which not only proves the validity of the new approach for composition design but also shows the new BMG of Cu60.5Zr34Nd5.5 can be cast into amorphous alloys with 2 mm in diameter.

摘要：Aimed at the optimal analysis and processing technology of die cavity of special-shaped products extrusion, by numerical analysis of trigonometric interpolation and Conformal Mapping theory, on the non-circle cross-section of special-shaped products, the conformal mapping function can be set up to translate the cross-section region into unit dish region, over numerical finite interpolation points between even and odd. Products extrusion forming can be turned into two-dimension problem, and plastic stream function can be deduced, as well as the mathematical model of the die cavity surface is established based on deferent kinds of vertical curve. By applying Upper-bound Principle, the vertical curves and related parameters of die cavity are optimized. Combining with electrical discharge machining (EDM) process and numerical control (NC) milling machine technology, the optimal processing of die cavity can be realized. Taking ellipse-shaped products as an instance, the optimal analysis and processing of die cavity including extruding experiment are carried out.

摘要：采用电子束熔化(EBM)成形工艺,制造具有可控多孔结构的Ti6Al4V植入体,分析测试其微观孔隙结构特征、孔隙率以及力学性能。扫描电镜观测结果表明,所制备的钛合金植入体孔隙结构特征与设计结构相符合,证明EBM技术能够实现钛合金植入体孔隙结构的控制;测得多孔植入体的孔隙率为60.1%,相应的抗压强度为163MPa,弹性模量为14GPa,与人体骨组织弹性模量相近。利用改进的碱热处理方法进行表面改性,并浸泡在模拟体液中以诱导磷灰石的形成。体外细胞培养试验结果表明,培养7d后成骨细胞在改性的试件表面大量粘附、生长、增殖。

摘要：This article analyses key technology used by network layer based on ZigBee technology. Then a reconfigure network as well as its strategy of forming network and distributing node is given. The simulation proved that the stability of reconfigure network and the ability of transmitting pass through obstacle are better than tradi-tional network;it has an active significance for shorter delay because of the flexible of the improved forming network strategy.

摘要：Worldwide, ESSILOR International provides customers with Progressive Addition Lenses (PAL), which replace bifocal lenses. Thermal replication is one process to produce glass moulds for PAL, using sagged glass on a ceramic slumping block. In this paper, thermal replication for producing PAL glass moulds is developed through 3D modelling and experimentation. Our numerical approach is validated by comparing it with experimentation on the global 3D topology of the sagged glass. It is also validated by using more severe optical comparison criteria, developed by ESSILOR International to analyze the conformity of their products. Through modelling, the thermal replication is analyzed by studying the evolving contact between the sagged glass and the ceramic slumping block during the thermal cycle and the glass flow on the upper side of the sagged glass.