摘要：The double loop network G(N; r, s) has N vertices and 2N directed edges. A natural question is how to choose r and s such that G(N; r, s) has diameter as short as possible for a given N. In 1993, Li, Xu and Zhang proposed a method of constructing double loop networks with the minimum diameter for the case of r=*** method is developed to construct such networks that none of their minimum diameters can be reached at r=*** a by-product, a flaw in an assertation by Esqu et al. is pointed out.

摘要：THE loop旨在通过步行和骑行连接超过300万居民,使他们能够在几分钟内前往各个服务网点。THE loop的目标是到2040年,使步行和骑行成为迪拜80%以上居民日常通勤的主要交通方式。THE loop项目旨在使迪拜成为全球具有连接性的步行和骑行城市。在欧洲,大多数人骑自行车或步行上班。在迪拜,设计师的目标是让超过80%的人每天骑自行车。因此,需要重新连接这些社区,同时使骑行或步行成为全年主要的交通方式,覆盖城市的各个部分。

摘要：This paper presents four different hybrid genetic algorithms for network design problem in closed loop supply chain. They are compared using a complete factorial experiment with two factors, viz. problem size and algorithm. Based on the significance of the factor “algorithm”, the best algorithm is identified using Duncan’s multiple range test. Then it is compared with a mathematical model in terms of total cost. It is found that the best hybrid genetic algorithm identified gives results on par with the mathematical model in statistical terms. So, the best algorithm out of four algorithm proposed in this paper is proved to be superior to all other algorithms for all sizes of problems and its performance is equal to that of the mathematical model for small size and medium size problems.

摘要：This paper presents and describes the test campaign of a low-cost loop Heat Pipes (LHP) design. LHP have been around for many decades now. Their potential as passive heat transfer devices has been widely demonstrated in numerous both ground- and space-based applications. One of the major disadvantages of LHP is their inherent high manufacturing cost;this is the main factor why LHP are still confined to niche/high end applications such as thermal management of spacecrafts. This paper proposes to use an alternative manufacturing design for the LHP evaporator, which is the main contributor to the overall LHP cost. Preliminary thermal results are also reported and briefly explained. Future work is needed to confirm the promising results discussed in this paper and address fully other issues such as tolerance of this LHP design to vibrations and accelerations typical of space missions.

摘要：为准确快速检测出电网电压的幅值、相位和频率,在分析对称分量法及单同步坐标系锁相环基本原理的基础上,提出了广义积分器锁相环的设计方法。这种方法在αβ坐标系下对电网电压进行正、负分序,进而锁定正序电压的相位和频率。并且使用Matlab/Simulink环境分别对单同步坐标系锁相环和基于广义积分器锁相环进行仿真研究,仿真结果表明广义积分器锁相环在电网不平衡时能够准确提取电网信号的幅值、相位和频率,频率自适应性良好且对低次谐波有一定的抑制作用。

摘要：We propose a novel resonator that can reduce magnetic field leakage using a ferrite plate. The proposed resonator consists of a rectangular loop, a ferrite plate, and an L-matching network. The ferrite plate is used as an H-field reflector to direct more H-field to each resonator, and the L-matching network is employed to match the 50 Ω of the feed cable at 13.56 MHz. Two identical resonators with dimensions of 30 cm × 15 cm are separated by 50 cm, and the resulting transmission efficiency is about ?12.3 dB at 13.56 MHz. This is about 4.2 dB higher than the resonators without the ferrite plate.

摘要：loop(即循环)素材是一定循环单位的动机素材,常在动机的音乐性、节奏的时尚性、空间安排等方面都有着精心安排和设计。loop的运用是Midi编曲常用制作手段之一,一定程度上简化了编曲的步骤和难度,允许我们直接调用,也可再编辑、甚至再创作,带来事半功倍的效果。当然,恰当、变通地使用是loop运用的不变法则。

摘要：A new class of compact and lightweight S-band 1 kW traveling-wave tube (TWT) is being developed for a microwave power module (MPM) that will be used for phased antenna array radar applications. The proposed S-band MPM provides a tenfold peak power increase compared to state-of-the-art S-band MPMs. In this paper, the design of the vacuum power booster TWT part of the MPM is presented. The compact and lightweight S-band TWT is driven by a 6 kV, 0.9 A electron beam. The amplifier is predicted by large-signal simulations to generate over 1 kW at S-band with 25 dB saturated gain and over 40% efficiency. The stability from unwanted oscillations has been investigated. To suppress the oscillations, the helix circuit has been coated with carbon composite material. The coaxial input and output antennas have been fabricated. For efficiency enhancement, a multi-stage depressed collector (MDC) has been designed using a 3D particle-in-cell (PIC) simulator, VORPAL. The collector design makes use of a current loop based on a feedback mechanism for effective design process. The integrated designs of a helix circuit, an electron gun, a periodic permanent magnet (PPM), antennas, and a collector are presented.

摘要：为了提高自适应巡航控制(ACC)系统的仿真精度,利用实车ACC系统的执行机构建立了硬件在环仿真(HILS)平台。HILS平台由仿真模型和硬件部分组成。仿真模型将运行在d SPACE仿真系统中,包括为了产生雷达模拟信号、ACC控制指令及计算车辆运行状态的雷达模拟器、ACC控制器和车辆模型。硬件部分主要包括电子节气门系统、主动制动系统及其附属的传感器及控制器等。通过串口通信接收来自ACC控制器的指令,HILS平台的硬件可以完成节气门开度和制动压力跟随控制。利用HILS平台进行了不同工况下的ACC仿真试验,仿真结果表明:HILS平台工作状况良好,并可以用于ACC控制器的开发。

摘要：《for…next循环》选自高中信息技术选修教材《算法与程序设计》（教科社版）中的《循环结构》。教材中《循环结构》主要包含《for…next循环》和《do while…loop循环》两部分内容，各用一课时，共计两课时。本教学设计为第1课时。