摘要：The bias drift of a micro-electro-mechanical systems （MEMS） accelerometer suffers from the l/f noise and the tem- perature effect. For massive applications, the bias drift urgently needs to be improved. Conventional methods often cannot ad- dress the l/f noise and temperature effect in one architecture. In this paper, a combined approach on closed-loop architecture modification is proposed to minimize the bias drift. The modulated feedback approach is used to isolate the l/f noise that exists in the conventional direct feedback approach. Then a common mode signal is created and added into the closed loop on the basis of modulated feedback architecture, to compensate for the temperature drift. With the combined approach, the bias instability is improved to less than 13 μg, and the drift of the Allan variance result is reduced to 17 μg at 100 s of the integration time. The temperature coefficient is reduced from 4.68 to 0.1 mg/℃. The combined approach could be useful for many other closed-loop accelerometers.

摘要：A novel wide-range CMOS variable gain amplifier （VGA） topology is presented. The proposed VGA is composed of a variable transconductor and a novel variable output resistor and can offer a high gain variation range of 80dB while using a single variable-gain stage. temperature-compensation and decibel-linear gain characteristic are achieved by using a control circuit that provides a gain error lower than ±1.5dB over the full temperature and gain ranges. Realized in 0.25μm CMOS technology, a prototype of the proposed VGA provides a total gain range of 64.5dB with 55.6dB-linear range,a P-1dB varying from - 17.5 to 11.5dBm,and a 3dB-bandwith varying from 65 to 860MHz while dissipating 16.5mW from a 2.5V supply voltage.

摘要：A DC-10Mb/s laser diode driver,compatible with TTL and CMOS levels,is presented. The optical power corresponding to‘1＇ and ‘0＇ can be set independently with resistors off-chip and stabilized with a closed loop. A novel peak-to- peak optical power monitor and stabilization mechanism is introduced. The circuit, fabricated in a CSMC 0. 5μm mixed signal CMOS process, can provide 120mA maximum drive current and 0. 6dB extinction ration fluctuation over - 20 ＋ 80℃ ,which is independent of input pattern.

摘要：This paper presents a low voltage, low power RF/analog front-end circuit for passive ultra high frequency （UHF） radio frequency identification （RFID） tags. temperature compensation is achieved by a reference generator using sub-threshold techniques. The chip maintains a steady system clock in a temperature range from - 40 to 100℃. Some novel building blocks are developed to save system power consumption,including a zero static current power-on reset circuit and a voltage regulator. The RF/analog front-end circuit is implemented with digital base-band and EEPROM to construct a whole tag chip in 0. 18μm CMOS EEPROM technology without Schottcky diodes. Measured results show that the chip has a minimum supply voltage requirement of 0.75V. At this voltage, the total current consumption of the RF/analog frontend circuit is 4.6μA.