摘要：A dual-sided multiple fans system with a piezoelectric actuator （＂D-MFPA＂）, which is able to drive eight passive vibrating fans and provide two-directional air flows by using only one piezoelectric actuator, has been investigated in this study. Moreover, two types of the fan designs, viz. magnetic fan （MF） and composite magnetic fan （CMF） were also explored. In the investigation of the MF, the results indicated that the resonance frequency of the D-MFPA increased from 27.6 Hz to 66 Hz as the length of the carbon fiber plate （L） decreased from 55 mm to 35 mm. It also decreased the amplitude of the D-MFPA from 12.4mm to 4.8 mm. For CMF, the results showed that the resonance frequency decreased when the length of the Mylar plate （Et） increased, and the maximum decrease was from 66 Hz to 45 Hz when L= 35 mm and Er= 30 mm. Dimensionless heat convection number （MD_MFPA） was defined to describe and quantify the improvement in the thermal performance. The results showed that the optimal MO-MFPA of the single piezoelectric fan was 1,58 for cooling one heat source. By contrast, under the same power consumption, the D-MFPA not only cooled two heat sources but also displayed better thermal performance.

摘要：This article presents a methodology for the integration of building performance simulation （BPS） into the writing of architectural history. While BPS tools have been developed mainly for design purposes, their current maturity enables to reliably apply them in simulating the performance of past buildings, even when these buildings have been significantly modified or demolished. The possibility to virtually reconstruct the performance of past buildings can help us to overcome the existing knowledge gap in the understanding of the role played by building performance and building performance research through the history of architecture and can therefore promote the intelligent and successful application of environmental features in contemporary architecture. The potential of the proposed methodology is presented here using a historical case study from 1960s Israel （a university building in Tel Aviv）, in which climatic considerations were an explicit part of the entire design process. The original thermal performance of the building was analysed by employing the EnergyPlus simulation engine, and the simulation results were used for evaluating the climatic impact of certain design decisions, comparing them with the proclaimed design goals and the original intentions of the architects.

摘要：To evaluate the thermal performance of a low-temperature electrical radiant floor heating system,an experimental facility equipped with a constant temperature chamber and different specimen floors is designed and *** heating cable is installed in the floor slab with a unit-rated power of 30 W/***-four different schemes are worked out and tested,which include three kinds of composite floor structures and eight kinds of cable *** cable distances are 30,40,50,60,80,100,130,150 *** main affective factors of the thermal performance and their influencing regularity are *** experimental results show that the system has good stability and reliability,and the ratio of the radiation heat-transfer rate to the gross heat-transfer rate is greater than 50%.When the floor structure and the cable distance are fixed,the gross heat-transfer rate of the upper floor surface has a maximum value at an optimal cable *** the experimental conditions in this paper,the optimal cable distance is 50 mm.