摘要：turbine cascade optimum design, the typical non-convex optimal problem, has long been a design challenge in the engineering fields. The new type hybrid Genetic Algorithms-whole annealing GeneticAlgorithms have been developed in this paper. Simulated annealing selection and non-uniform mutation are adopted in the whole annealing Genetic Algorithms. Whole annealing Genetic Algorithmsoptimal performance have been tested through mathematical test functions. On this basis, turbinecascade inverse design using whole annealing Genetic Algorithms have been presented. The B-Splinefunction is applied to represent the cascade shape. C-type grid and Godunov scheme are adopted toanalysis the cascade aerodynamic performance. The optimal problem aims to obtain an cascade shapefrom different initial cascade through the given target pressure distribution. The optimum cascadeshape is in well agreement with the target cascade shape. The numerical results show that the wholeannealing Genetic Algorithms are the powerful optimum tools for turbine optimum design or othercomplex engineering design problems.

摘要：In order to reduce product development cycle time, aerospace companies tend to develop various correlations integrating geometric and performance parameters. This paper covers the development of a parameterization modeling, to be used in the preliminary design phase, for the turbine cover plate of an aero-engine. The parameterization modeling of the turbine cover plate is achieved by using commercial CAD （computer aided design） software processing in batch mode. Two main approaches are presented the outer face and the skeleton models. These models can then be integrated into an iterative process for designing optimal shapes. Both models are capable of reproducing existing cover plate with reasonable accuracy in relatively shorter time periods. However, the skeleton approach provides probably the best results in terms of flexibility and accuracy, but increases programming complexity and requires greater run times.

摘要：Small-scale vertical axis wind turbine (VAWT) rotor is developed for use in areas lacking adequate energy infrastructure. The materials and methods of construction are selected to minimize cost as much as possible. The paper describes the design of different kinds of vertical axis wind turbine rotors having different number of blades and twist angle. The aim of the work is to study the influence of the different designs on rotational speed and power of rotor in different wind speed.

摘要：In the context of industrial competitiveness, taking into account the process design throughout the product life cycle is inevitable, from the expression of the need to recycle, the capitalization and knowledge management increasingly a target much sought after companies because of increased knowledge. Indeed, during the approval phase and use studies and scientific researches make have generated knowledge especially that concerning the reliability of system components. In this context, the capitalization and reuse of knowledge are necessary and have a particular interest in design and particularly in the preliminary design phase. Studies are already completed suggest a design process ranging from the need to solve the problem. At each phase of the process, structural characteristics are defined by the designer through the available knowledge already capitalized to make choice of component and their arrangement. This article proposes integrating the analysis of system reliability in this process. The objective is the use of knowledge in the vision safety and hazards of operating through the study of reliability and decision making for the selection of solution.

摘要：In this work was carried out the aerodynamics design of a 1 MW horizontal axis wind turbine by using blade element momentum theory (BEM). The generated design was scaled and built for testing purposes in the discharge of an axial flow fan of 80 cm in diameter. Strip theory was used for the aerodynamic performance evaluation. In the numerical calculations was conducted a comparative analysis of the performance curves adding increasingly correction factors to the original equation of ideal flow to reduce the error regarding real operating values got by the experimental tests. Correction factors introduced in the ideal flow equation were the tip loss factor and drag coefficient. BEM results showed good approximation using experimental data for the tip speed ratio less than design. The best approximation of the power coefficient calculation was for tip speed ratio less than 6. BEM method is a tool for practical calculation and can be used for the design and evaluation of wind turbines when the flow rate is not too turbulent and radial velocity components are negligible.

摘要：Over the course of the past decade, power generation based on wind energy has become a significant component in modern power systems, which has caused substantial increase in the wind power based research. As it is complicated to use a real wind turbine for laboratory purposes, development of a replica of a real wind turbine that can be connected and used indoors is imperative. This paper presents the design and development of a wind turbine simulator that operates on the typical power-speed characteristics of a wind turbine. First, the mathematical model of the wind turbine simulator is developed and the corresponding CAD simulations are carried out. Proposed hardware implementations involve a DC motor-DC generator set, a variable load and a control system based on PI controllers. It is a simple, low power and low cost design that can be easily connected to an AC system through an inverter.

摘要：The design of a stall-regulated wind turbine to achieve a maximum annual energy output is still a formidable task for engineers. The design could be carried out using an average wind speed together with a standard statistical distribution such as a Weibull with k = 2.0. In this study a more elaborated design will be attempted by also considering the statistical bias as a design criterion. The wind data used in this study were collected from three areas of the Lamtakong weather station in Nakhonratchasima Provice, the Khaokoh weather station in Phetchaboon and the Sirindhorn dam weather station in Ubonratchathani, Thailand. The objective is to design a best aerodynamic configurations for the blade (chord, twist and pitch) using the same airfoil as that of NREL Phase VI wind turbine. Such design is carried out at a design wind speed point. Wind turbine blades were optimized for both maximum annual energy production and minimum cost of energy using a method that take into account aerodynamic and structural considerations. The work will be carried out by the program “SuWiTStat” which was developed by the authors and based on BEM Theory (Blade Element Momentum). Another side issue is the credibility of the Weibull statistic in representing the real wind measurement. This study uses a regression analysis to determine this issue.

摘要：This paper presents the improved design of a 25 MW gas turbine power plant at Omoku in the Niger Delta area of Nigeria, using combined cycle application. It entails retrofitting a steam bottoming plant to the existing 25 MW gas turbine plant by incorporating a heat recovery steam generator. The focus is to improve performance as well as reduction in total emission to the environment. Direct data collection was performed from the HMI monitoring screen, log books and manufacturer’s manual. Employing the application of MATLAB, the thermodynamics equations were modeled and appropriate parameters of the various components of the steam turbine power plant were determined. The results show that the combined cycle system had a total power output of 37.9 MW, made up of 25.0 MW from the gas turbine power plant and 12.9 MW (an increase of about 51%) from the steam turbine plant, having an HRSG, condenser and feed pump capacities of 42.46 MW, 29.61 MW and 1.76 MW respectively. The condenser cooling water parameters include a mass flow of 1180.42 kg/s, inlet and outlet temperatures of 29.8°C and 35.8°C respectively. The cycle efficiency of the dry mode gas turbine was 26.6% whereas, after modification, the combined cycle power plant overall efficiency is 48.8% (about 84% increases). Hence, SIEMENS steam turbine product of MODEL: SST-150 was recommended as the steam bottoming plant. Also the work reveals that a heat flow of about 42.46 MW which was otherwise being wasted in the exhaust gas of the 25 MW gas turbine power plant could be converted to 12.9 MW of electric power, thus reducing the total emission to the environment.

摘要：turbine是一种基于Servlet的网络应用开发框架,它为特定类型的软件构筑了一个可重用的设计,使得Web开发人员可以快速、安全地构建自己的网络应用。文章首先给出了turbine作为开发框架的定义;然后介绍了turbine的构成,探讨turbine工作的原理;最后简单介绍了如何使用turbine构建自己的Web应用。

摘要：turbine是一个基于Java小服务程序(Servlet)的Web应用程序框架，它使得Java开发者可以快速、安全的构建自己的Web应用程序。与Struts不同的是turbine的设计思路决定了它是一个Web应用的完整的解决方案，它是一个完整的实现了MVC模式的应用框架。但是对众多Web开发者来讲turbine框架过于烦杂难懂。