摘要：The waveguide design is one of the most important parts in a terahertz quantum cascade laser（QCL）. Si/SiGe QCL waveguides, based on the Drude model and finite-difference time-domain （FDTD） method, are designed by the traditional refractive index waveguide structure, the single-sided metal structure, the double-metal clad structure, and a novel metal/metal silicide structure. The metal/metal silicide structure, showing high modal confinement,is convenient in process engineering and is expected to be a viable waveguide solution for Si/SiGe QCLs in the THz range.

摘要：The slow light propagation in a line waveguide in the two-dimensional triangular photonic crystal has been numerically studied, based on which a wideband photonic crystal waveguide with low group-velocity and low dispersion is proposed. The numerical simulation analysis shows that it is possible to maximize the group index and minimize the group-velocity dispersion in wide bandwidth by increasing the radius of the basic air hole and changing the position of the first two rows of air holes in photonic crystal waveguides. Such a photonic crystal waveguide exhibits low group velocity and low group-velocity dispersion over a broad wavelength range. A larger group index-bandwidth product is achieved in this type of waveguide structure. The numerically computed results present the normalized bandwidth as 0.32%, 0.48% and 0.642% corresponding to the group index of 85, 58 and 45, respectively.

摘要：The 808nm laser diodes with a broad waveguide are designed and *** thickness of the Al_ 0.35 - Ga_ 0.65 As waveguide is increased to 0.9μ*** order to suppress the super modes,the thickness of the Al_ 0.55 Ga_ 0.45 As cladding layers is reduced to only 0.7μm while keeping the transverse radiation losses of the fundamental mode below 0.2cm -1 .The structures are grown by metal organic chemical vapour *** devices show excellent *** maximum output power of 10.2W in the 100μm broad-area laser diodes is obtained.

摘要：Three dual-mode band-pass filters are presented in the present paper. The first filter is realized by dual-mode substrate integrated waveguide (SIW) cavity;the second is based on the integration of SIW cavity with electromagnetic band gap (EBG);and the third is based on the integration of SIW cavity with complementary split ring resonator (CSRR). The dual-mode SIW cavity is designed to have a fractional bandwidth of 4.95% at the midband frequency of 9.08 GHz;the proposed EBG-SIW resonator operates at 9.12 GHz with a bandwidth of 4.38% and the CSRR-SIW resonator operates at 8.66 GHz with a bandwidth of 2.54%. The proposed filters have the high Q-factors and generate a transmission zero in upper stopband, and these by the use of Rogers RT/duriod 5880 (tm).

摘要：In this paper, an optical waveguide junction is introduced to reduce crosstalk based on a hexagonal structure of photonic crystals for TE modes. The wavelength is 1330 nm which is an important wavelength for optical fiber data transmission. Simulation results show that the proposed design exhibits a reduction of -50 dB in crosstalk. It translates to a considerable isolation improvement between two crossover waveguides. FDTD method is used to obtain the transmission coefficient.

摘要：We propose and analyze a submicron stub-assisted ultrafast all-optical plasmonic switch based on nonlinear MIM waveguide. It is constructed by two silicon stub filters sandwiched by silver cladding. The signal wavelength is assumed to be 1550 nm. The simulation results show a ?14.66 dB extinction ratio. Downscaling the silicon waveguide in MIM structure leads to enhancement of the effective Kerr nonlinearity due to tight mode confinement. Also, using O+ ions implanted into silicon, the switching time less than 10 ps and a delay time less than 8 fs are achieved. The overall length of the switch is 550 nm.

摘要：In this paper, we design and characterize a novel small size four-channel biosensor based on the two-dimensional photonic crystal with introducing waveguides and nano-cavities in the hexagonal lattice of air pores in the silicon slab. By removing a group of air pores, waveguides are achieved, and nano-cavities are shaped by modifying the radius of air pores. Highly parallel operation of this biosensor due to the special architecture is the capability of the designed structure. The biomaterials which are suspended in a liquid medium inside nano-cavities cause effective refractive index changes which lead to the resonant wavelength shift in the output terminal. According to results, with increasing the refractive index of nano-cavities, resonant wavelengths shifts to longer values. For biochemical sensing like DNA molecule and protein and for the refractive index detection, this novel designed biosensor can be utilized.

摘要：In this paper we propose an analyzing of the response of a stress optical fiber sensor of which we proposed several design. We show that an optical fiber sensor with these designs can covenanting allow the measuring the force/stress applied to a mechanical structure or which it is linked, by optimizing the uses of appropriate materials for constituting the sensor support. The experiment that we introduce to validate our approach based in principles includes design with a support bearing a multimode optical fiber organized in such a way that the transmitted light is attenuated when the fiber-bending angle coming from stitching in holes of the support is modified by the effects of the force/stress applied to the optical fiber sensor realized in this way. The tests realized concern the most relevant parameters that define the performances of the stress sensor that we propose. We present the problems that we to solved for the optimization of the sensor for selecting the more efficient material for the optical fiber sensor support related to a relevant choice of optical fibers.

摘要：We study the coupling problem of two waveguide antennas using the design of a two-dimensional inhomogeneous impedance structure with a fixed reflected field. Since this structure enables electromagnetic compatibility between antennas located on a plane, the behaviors of the electromagnetic field along the impedance structure are investigated. The method of moments is used to solve the integral equations and the numerical results are presented and analyzed. To reduce coupling between antennas, we need to take into account both the amplitude distribution of the field along the structure and in the openings of the antennas. In addition, while designing the structure, it is necessary to control the coefficient of decoupling.

摘要：This paper presents the design and performance of a 94 GHz crossbar mixer using chip diodes in crossbar configuration. The mixer has been designed in suspended stripline configuration on 2 mil fused quartz substrate. Co-simulation between Agilent Advance Design System (ADS) and CST Microwave studio is used to simulate and optimize the mixer circuit. The conversion loss of this crossbar mixer with ~10 dBm of LO power over RF bandwidth (89 to 93.8 GHz) with LO frequency at 94 GHz has been measured. Measurement results show minimum conversion loss of the order of 8 dB and achieved LO to RF isolation was greater than 26 dB.