摘要：In order to make a 10 Gbit/s 2：1 half-rate multiplexer operate without external clocks, a 5 Gbit/s clock recovery （CR） circuit is needed to extract the desired clock from one input data. For the CR circuit, a 3-stage ring voltage-controlled oscillator （VCO） is employed to avoid an unreliable startup of a 2-stage VCO and a low oscillation frequency of a 4-stage VCO. A phase frequency detector （PFD） is used to expand the pull-in range to meet the wide tuning range of a VCO required by process-voltage-temperature （PVT） variation. SMIC 0. 18-μm CMOS technology is adopted and the core area is 170 μm ×270 μm. Measurements show that, under a 1.8 V supply voltage, it consumes only about 90 mW, and has an input sensitivity of less than 25 mV, an output single-ended swing of above 300 mV, a phase noise of - 114 dBc/Hz at 1 MHz offset and a pull-in range of 1 GHz.

摘要：A 2 5Gb/s depletion mode GaAs MESFET clock recovery and decision circuit is described,which applies to the optical fiber *** circuit consists of a clock recovery circuit,including a preprocessor,phase detector(PD),low pass filter(LPF) and voltage controlled oscillator(VCO) and a decision circuit,including a comparator and a *** SPICE simulation result confirms the high frequency 2 5GHz of the clock recovery and the high speed 2 5Gb/s of the decision *** 2 5Gb/s decision circuit has proved to be able to deal with the input signal and produce a digital output signal after it being sampled by a clock signal.

摘要：A 2.5Gb/s clock and data recovery （CDR） circuit is designed and realized in TSMC＇s standard 0.18/μm CMOS process. The clock recovery is based on a PLL. For phase noise optimization,a dynamic phase and frequency detector （PFD） is used in the PLL. The rms jitter of the recovered 2.5GHz clock is 2.4ps and the SSB phase noise is - 111dBc/Hz at 10kHz offset. The rms jitter of the recovered 2.5Gb/s data is 3.3ps. The power consumption is 120mW.