摘要：Methods for computer aided design and analysis on color-woven fabrics are presented. The relation of color pattern, colored warp, colored weft and the model for regular weave texture are given based on their formative principle. Some efficient algorithms are developed to determine the color order of warp and weft threads which yields a given color pattern and regular weave texture. Finally, the design system structure and data process flowing are introduced.

摘要：Poly Laevo Lactic Acid (PLLA), in spite of being an excellent bioplastic, has exorbitantly high market price due to the high cost of raw material (lactose, glucose, sucrose). Hence, its manufacture is being attempted starting from waste effluents such as cheese whey and molasses. Earlier studies on the same in fluidized bed and semifluidized bed biofilm reactors yielded encouraging results. The present study therefore involves design and analysis of inverse fluidized bed biofilm reactors for lactic acid synthesis. The performance features of the bioreactor have been studied both mathematically as well as experimentally. The inverse fluidized bed biofilm reactor has been found to provide more than 75% conversion of sucrose/lactose even at high capacities (high feed flow rates) exceeding 56,000 L/hr, within a reasonably low reactor volume. The fractional substrate conversion increases, though sluggishly, with increase in feed flow rate due to bed expansion and also with increase in cell mass concentration in biofilm due to enhancement in intrinsic rate of bioconversion. The inverse fluidized bed biofilm reactor of proposed design could be safely recommended for the commercial synthesis of polymer grade lactic acid from waste effluents such as cheese whey and molasses. The low operating cost of the bioreactor (due to downflow mode of operation) enhances the economy of the process. This would also help in significantly lowering the market price of the green plastic (PLLA) and shall promote its large scale manufacture and utilisation.

摘要：To supply a convenient and expandable tool to organize the designrequirements of a new aircraft and estimate its basic design parameters during conceptual design,the Environment of design Requirements Input and Preliminary Sizing (EDRIPS) was developed. In thisenvironment, the performance requirements, mission profile and payloads could be inputted orselected respectively through user-friendly interfaces in a highly interactive way. Based on theserequirements, it enables the designer to pick up a design point in the solution space throughconstraint analysis, and then conduct mission analysis either step by step or via auto iteration byusing an improved method for estimating the takeoff weight. The implementation of each module andthe methods utilized are described. A design example is finally presented and analyzed to validatethe efficiency and reliability of applying EDRIPS to aircraft conceptual design.

摘要：Based on the case-based designing (CBD), it is presented that the similarity of the fixtures is described by the fixture information of workpiece and the structure information of feature. Then, the computer-aided fixture design system is created on case-based reasoning (CBR), in which the attributes information of the main features of workpiece and structure of fixture as case index code are designed for the retrieve of the similar cases, and the structure and hierarchical relation of case library are set up for store. Meanwhile, the algorithm based on the knowledge-guided in the retrieve of the similar cases, the strategy of case adaptation and case storage in which the case identification number is used to distinguish from similar cases are presented. The application of the system in some projects improves the design efficiency and gets a good result.

摘要：In the context of applying computer aided design tools to aircraft conceptualdesign, a sketch based approach is proposed to help designers turn their original concepts intocomplex numerical models that are usable for further analysis and optimization. This approachemphasizes the integration of general configuration and the layout of such components as engines,payloads, fuel tanks and landing gears, and the representation of a design scheme as uniform planesketches and three dimensional models. This paper presents the measures adopted to implement theapproach in a prototype system, including the object-oriented data structure, friendly graphicaluser interfaces and basic features of relevant modules. Several examples generated in the prototypeand applications of the results are finally outlined to illustrate the effectiveness of theapproach.

摘要：To improve the transmission accuracy and stiffness of the ball cycloid reducer, the authors developed a novel cycloid ball reducer, which uses a full complement ball as its gear teeth. Ceramic balls are used to get better performance in severe working conditions. A simple synthesis method was also found to determine the raceway forms and compute the contact forces among the balls and raceways. The Contact Stress Analysis (CSA) computer program was used to optimize the design of the reducer. In this paper, the following topics are covered: (1) Study of the geometry of the raceways. (2) Analyses of the principal curvature of the raceways are also accomplished. In addition, the modification of the raceway is put forward. (3) The contact forces and the reducer efficiency are evaluated. (4) Study of the performance of ceramic balls used in the CBR. A reducer using the above design technique was tested and the performances show that the reducer has high precision and rigidity. An increase of more than 50 percent transmission power was realized in the new gearing.

摘要：To get an optimal product of orthopaedic implant or regenerative medicine needs to follow trialand-error analyses to investigate suitable product’s material,structure,mechanical properites *** whole process from in vivo tests to clinical trials is expensive and *** model is seen as a useful analysis tool to make the product development.A series of models for simulating tissue engineering process from cell attachment to tissue regeneration are *** challenging is that models for simulating tissue engineering processes are developed *** cell to tissue regeneration,it would go through blood injection after moving out the defect;to cell disperse and attach on the scaffold;to proliferation,migration and differentiation;and to the final part-becoming mature *** paper reviewed models that related to tissue engineering process,aiming to provide an opportunity for researchers to develop a mature model for whole tissue engineering *** article focuses on the model analysis methods of cell adhesion,nutrient transport and cell proliferation,differentiation and migration in tissue *** cell adhesion model,one of the most accurate method is to use discrete phase model to govern cell movement and use Stanton-Rutland model for simulating cell *** for nutrient transport model,numerical model coupling with volume of fluid model and species transport model together is suitable for predicting nutrient transport *** cell proliferation,differentiation and migration,finite element method with random-walk algorithm is one the most advanced way to simulate these *** of the model analysis methods require further experiments to verify the accuracy and *** to the lack of technology to detect the rate of nutrient diffusion,there are especially few researches on model analysis methods in the area of blood ***,there is still a lot of work to be done in the resea

摘要：In the conceptual stage the function design process is realized by the computer aided application. After surveying on the function specification methods and the function modeling, a computer aided function design environment is analyzed. Subsequently based on a module library and principle catalogue, a solution finding process as a part of conceptual design is proposed for a creative design. In addition, a search algorithm to find the solution of adaptable function structure is also discussed. The concepts proposed in this paper can support the subsequent design stages, especially simulation for checking the function structure defects.

摘要：An approach to feature-based parametric design for die and mould is proposed in this *** assembly relationship and parts of the die and mould are described by *** dependent relationship of features is described by parent-child operator *** feature shape and location can be modified by design *** expert system is used for deriving a geometry of the features which satisfies the given *** approach provides a more natural and convenient method of representing a parametric model of the die and mould.

摘要：A hidden line removal algorithm for bi parametric surfaces is presented and illustrated by some experimental results. The enclosure test is done using area coordinates. A technique of moving box of encirclement is presented. It is found that the algorithm is of general purpose, requires minimal computer storage, has high accuracy and simplicity, and is very easy to be implemented on a computer.