摘要：Attaining a decarbonized and sustainable energy system,which is the core solution to global energy issues,is accessible through the development of hydrogen ***-exchange membrane water electrolyzers(PEMWEs)are promising devices for hydrogen production,given their high efficiency,rapid responsiveness,and *** plates account for a relatively high percentage of the total cost and weight compared with other components of ***,optimization of their design may accelerate the promotion of *** paper reviews the advances in materials and flow-field design for bipolar ***,the working conditions of proton-exchange membrane fuel cells(PEMFCs)and PEMWEs are compared,including reaction direction,operating temperature,pressure,input/output,and ***,the current research status of bipolar-plate substrates and surface coatings is summarized,and some typical channel-rib flow fields and porous flow fields are ***,the effects of materials on mass and heat transfer and the possibility of reducing corrosion by improving the flow field structure are ***,this review discusses the potential directions of the development of bipolar-plate design,including material fabrication,flow-field geometry optimization using threedimensional printing,and surface-coating composition optimization based on computational materials science.

摘要：Understanding the influence of purities on the electrochemical performance of pure aluminum(Al)in alkaline media for Al–air batteries is ***,we comprehensively investigate secondary phase precipitate(SPP)-induced localized corrosion of pure Al in NaOH solution mainly based on quasi-in-situ and cross-section observations under scanning electron microscopy coupled with finite element *** experimental results indicate that Al–Fe SPPs appear as clusters and are coherent with the Al *** alkaline media,Al–Fe SPPs exhibit more positive potentials than the substrate,thus aggravating localized galvanic corrosion as cathodic ***,finite element simulation indicates that the irregular geometry coupled with potential difference produces the non-uniform current density distribution inside the SPP cluster,and the current density on the Al substrate gradually decreases with distance.

摘要：A brand new design of integrated corrosion information system is introduced to meet the constantly increasing demands of material corrosion information. Two concepts, "general-purpose corrosion data model" and "public corrosion data ex-changing interface", are suggested to integrate a wide variety of corrosion data sources based on detailed analysis on characteristics of each source in order to promote the information sharing and data mining. The architecture of integrated corrosion information environment is blueprinted. The insight analysis is focused on 1) architecture of the system; 2) data flow and information sharing; 3) roles of system players and their interactions; 4) approaches to data integration. Several key issues are addressed in detail including coverage of data model, data source integration and mitigation, and data granularity from system performance and model acceptance points of view. At the end, the design and implementation ap-proach of general corrosion data model is presented based on cutting edge IT techniques.

摘要：使用低成本、高安全性的水系电解液使二次锌金属电池(AZMBs)成为大规模储能系统是最有前途的选择.然而,锌金属负极在水系电解液中热力学稳定性较差,严重阻碍了AZMBs的实际应用.在此,我们通过在锌表面涂覆氟化石墨并利用氟化石墨和锌之间原位的界面反应开发了一种富氟的杂化人工固体电解质界面来解决上述问题.疏水的氟化石墨可以有效地限制电解液和电极之间的接触,从而显著提高锌负极的抗腐蚀能力.同时,由氟化石墨和锌原位反应生成的ZnF_(2)共同组成的富氟杂化界面可以促进Zn2+的脱溶剂化作用,并均匀化锌离子通量,从而有效地抑制了副反应发生和枝晶生长.因此,在苛刻的测试条件下(10 mA cm^(−2),1 mA h cm^(−2)和30 mA cm^(−2),10 mA h cm^(−2)),对称电池可以分别稳定地循环1400和200小时以上,远远超过了裸锌的性能.此外,使用载量为6 mg cm^(−2)的MnO_(2)正极组装的Zn/MnO_(2)全电池在1 A g^(−1)的条件下经过2000次循环,仍能保持80%以上的容量.本文提出的这种构建富氟杂化ASEI的方法可以为设计高性能AZMBs提供一种有效的潜在策略.

摘要：我们与武汉市材料保护研究所合作,针对湿热环境下机电产品的主要防护层之一——电镀层的选择和指导问题,设计了腐蚀专家系统的一个子系统——电镀咨询系统***采用我们研制成功的新型函数/逻辑程序设计语言LISP-ELP编制.目前,该系统运行顺利,基本上达到了预期的效果.本文阐述该系统的结构、功能、实现策略和应用情况.1 设计目标产品表面防护涂层的选择,是产品设计和生产制造部门普遍关心和重视的问题.ECES的研制目的是把电镀方面的专家知识融合到计算机技术中,为用户提供专家级的辅助决策意见和指导.作为腐蚀专家系统的一个部分——ECES的设计目标是: