摘要：3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent *** the computational accuracy and efficiency,the optimal choices of numerical parameters and algorithms in FE modelling were *** formation mechanisms of cross-section distortion and springback were *** effects of pre-stretching,post-stretching,friction,and the addition of internal fillers on forming quality were *** results show that the stress state of profile in stretch-bending is uniaxial with only a circumferential *** stress distribution along the length direction of profile is non-uniform and the maximum tensile stress is located at a certain distance away from the center of *** aluminum profile is gradually attached to bending die,the distribution characteristic of cross-section distortion along the length direction of profile changes from V-shape to *** unloading the forming tools,cross-section distortion decreases obviously due to the stress relaxation,with a maximum distortion difference of 13%before and after *** pre-stretching and post-stretching forces increase,cross-section distortion increases gradually,while springback first decreases and then remains *** increasing friction between bending die and profile,cross-section distortion slightly decreases,while springback ***-section distortion decreases by 83%with adding PVC fillers into the cavities of profile,while springback increases by 192.2%.