摘要：The Q-band （33-50 GHz） fast sweep frequency modulated continuous wave （FMCW） reflectometry has been recently developed for electron density profile measurement on the Joint TEXT tokamak. It operates in ordinary mode （O-mode） with a 20 μs sweeping period, covering the density range from 1 × 10^19m 3 to 3 × 10^19m-3. On the bench test, a Yttrium Iron Garnet （YIG） filter is used for the dynamic calibration of the voltage controlled oscillator （VCO） to obtain a linear frequency sweep. Besides, the use of a power combiner helps to improve the sideband suppression level of the single side-band modulator （SSBM）. The reconstructed density profiles are presented, which demonstrate the capability of the reflectometry.

摘要：We investigate the growth of strain-engineered low-density 1hAs bilayer quantum dots （BQDs） on GaAs by molecular beam epitaxy. Owing to increasing dot size and In composition of the upper QDs, low-density BQDs in a GaAs matrix with an emission wavelength up to 1.4 μm at room temperature are achieved. Such a wavelength is larger than that of conventional QDs in a GaAs matrix （generally of about 1.3μm）. The optical properties of the BQDs are sensitive to annealing temperature used after spacer layer growth. Significant decrease of integrated PL intensity is observed as the annealing temperature increases. At 10 K, single photon emission from the BQDs with wavelength around 1.3μm is observed.

摘要：A new apparatus was designed with a thick-walled glass capillary, electric heater tube with red copper and heat preservation. The thick-walled glass capillary was used for its advantages of resistance to acid corrosion and pressure, and ease of observation. The experimental densities over the entire range of mole fraction for the binary mixture of p-xylene＋acetic acid and o-xylene＋acetic acid were measured using the new apparatus at temperatures ranging from 313.15K to 473.15K and pressure ranging from 0.20 to 2,0 MPa. The density values were used in the determination of excess molar volumes, W. The Redlich-Kister equation was used to fit the excess molar volume values, and the coefficients and estimate ot the standard error values were presented. The experimental resuits prove that the density measurement apparatus is successful.

摘要：Splitting water under large current density is essential for efficient large-scale production and commercial utilization of ***,the performance of the available electrocatalysts for hydrogen evolution reaction(HER)is far from satisfactory under large current density in alkaline *** we report a remarkably active and durable electrocatalyst,long and dense MoS2/Ni3S2 co-axial heterostructure nanowires on nickel foam(NF).Notably,it requires only 182 and 200 mV overpotential to achieve large current density of 500 and 1000 mA cm^-2,respectively,in alkaline solution,which are far superior to those of Pt/C-NF(281 and 444 mV)and the reported best non-noble metal catalysts(191 and 220 mV).The physical origin for this extraordinary HER performance is analyzed,which provides a useful guide for structure design of electrocatalysts to further improve their performance.

摘要：Chickpea is a major food crop and the world＇s third most widely-grown legume after bean （phaseolus vulgaris L.） and pea （pisum sativam L.）. The yield of chickpea can be improved by planting of optimum density of chickpea cultivars. The purpose of this research was to investigate the effect of plant density on yield and some characteristics of chickpea （Cicer arietinum L. var. Philips）. A field experiment was conducted on research farm of, Gonbad High Education Center, Iran. The study was laid out factorial in randomized block design with four replications. The treatments were factorial row spacing （A1=35 cm, A2=45 cm and A3=55 cm） and plant spacing in the row （Plant-within-spacing row） （B1=5 cm, B2=7.5 cm and B3=10 cm）. AIBI=（35×5）=57.14, AIB2= （35×7.5）=38.09, A1B3=（35×10）=28.57, A2B1=（45×7）=44.44, A2B2=（45×7.5）=29.26, A2B3=（45× 10）=22.23, A3B1=（55×5）=36.36, A3B2=（55 ×.5）=24.24, A3B3=（55 × 10）=18.18 plant.m^-2. At the harvest time, 5 plants of each plot were selected randomly and used for determination of pods per plant, unfilled pod per plant, height and number of branches. Result showed the yield was not affected by density. The maximum yield obtained in row spacing 55 cm and plant spacing in the row 7.5 cm which was equal 1802.87 kg·ha^-1. Row spacing had statistically significant effect on the pod number per plant, branches number per plant and plant height.

摘要：In order to investigate the most suitable sowing period and the optimum planting density of new com variety ‘Yudan 30＇ In Chongqing region, using split plot experiment design, the effect of sowing date and planting density on main a- gronomic characters and yield of maize in the field was studied. The results showed that in Chongqing, the delay of sowing date could shorten the fertility peri- od, and reduce 100-grain Weight and yield, but could increase plant height and ear height, panicle traits did not change significantly. With the density increasing, plant height and ear height also increased, while ear length, ear diameter, stem diameter, row number and kernel number also decreased. 100-grain weight and yield also in- creased with the increase of density, but to a certain threshold, yield and 100-grain weight decreased with the increase of density. The yield of 3 sowing periods pre- sented as AI〉A2〉A3, the yield of 4 kinds of density presented as B3〉EH〉B2〉B1, and the yield under sowing time and density interaction presented as AIB3〉A1B4〉 A2.B3〉A2.B4〉A3B3〉 A3B4〉A2.B2〉A1BI〉A2BI〉A3BI. So proper eady sowing and increase of planting density could raise the yield of maize per unit area, and AIB3 was the optimum planting configuration in Chongqing area.

摘要：Computational strategies have been employed to investigate the influence of the nature of monomers and cross-linker in order to design three dimensional imprinted polymers with selective recognition sites for L-phenylalanine benzyl ester(L-PABE)***,computational chemistry methods were applied to screen the molar quantity of functional monomers that interact with one mole of the template *** of the nature of functional monomer,cross-linker,and molar ratio were determined computationally using density functional calculations with B3LYP functional and generic 6-31G basis *** acid(MAA)and ethylene glycol dimethacrylate(EGDMA)were used as the functional monomer and crosslinking agent,respectively.L-PABE imprinted polymer layered on multiwalled carbon nanotube(MWCNT)and conventional bulk MIP were synthesised and characterized as *** investigate the influence of pre-organization of binding sites on the selectivity of L-PABE,respective non-imprinted polymers were also ***-MIPs and MIPs exhibited the highest adsorption capacity towards *** synthesized polymers revealed characteristic adsorption features and selectivity towards L-PABE in comparison with those of its enantiomer analogues.

摘要：Clearly understanding the structure-function relationship and rational design of efficient CO2 electrocatalysts are still the *** article describes the molecular origin of high selectivity of formic acid on N-doped SnO2 nanoparticles,which obtained via thermal treatment of g-C3N4 and SnCl2·2H2O *** with density functional theory(DFT)calculations,we discover that N-doping effectively introduces oxygen vacancies and increases the charge density of Sn sites,which plays a positive role in CO2 *** addition,N-doping further regulates the adsorption energy of^*OCHO,^*COOH,^*H and promotes HCOOH *** from above modulation,the obtained N-doped SnO2 catalysts with oxygen vacancies(Ov-N-SnO2)exhibit faradaic efficiency of 93% for C1 formation,88% for HCOOH production and well-suppression of H2 evolution over a wide range of potentials.

摘要：Novel technologies in consideration of industrial sustainability(IS)are in urgent need to satisfy the increasing demands from the *** realizes the production of materials while maintaining environmental and resource *** chemical materials used in CO2 capture and storage(CCS)technologies play a significant role in the disposal of greenhouse gas emissions coming from large stationary fossil-fired power plants,which breaks the principle of IS and brings severe environmental *** study aims at providing a detailed review of first-principles modeling(density functional theory,DFT)of materials in CO2 capture *** analysis provides insight into the atomic properties of the studied systems and builds an efficient guidance of the future design of the materials used in CO2 capture *** materials including oxygen carriers,metal organic frameworks,membranes,zeolites,ionic liquids and some other promising candidates are *** computational studies bring the outcomes of the adsorption behaviors,structural characteristics and accurate force fields of the studied materials in short turn-around times at low *** review can stimulate the design of novel materials with specific target of CO2 capture and promote the industrial sustainability of fossil fuel combustion technologies.

摘要：Adequate information is sparse for many tropical timbers on their engineering applications, which make their international promotion difficult. The physical and mechanical properties of Klainedoxa gabonensis Pierre ex Engl. （a lesserutilized species） and Entandrophragma cylindricum were compared. K. gabonensis contained more moisture with greater density at 12 % moisture content than E. cylindricum and had a tangential-radial ratio for swelling and shrinkage of 1.31-1.38 and 1.58-1.63, respectively, within acceptable thresholds for engineering/structural timbers. For K. gabonensis, shear parallel to grain was 32.2 ± 0.4-33.5 ±1 N mm^-2; compressive parallel to grain, 80.7 ± 1.4-90.6± 1 N mm^-2; modulus of rupture, 204± 4.0-214 ± 4.0 N mm^-2 and modulus of elasticity, 28,932 ± 664-29,493 ±822 N mm^-2. These properties were superior to those of E. cylindricum [（15.5 ± 0.9）- （15.6 ± 0.6）, （56.4 ± 4.5）-（63.6 ± 1.2）, （99.4 ± 4.7）- （121.3 ± 10.6）, and （9987.4 ± 207）-（10,051 ± 258） N mm^-2, respectively] and compared well with those of several traditional timbers for conslruction and furniture production. Its use would contribute to minimize pressure on the primary timbers in the forests and widen the raw material base for wooden products.