摘要：The intermediate heat exchanger for enhancement heat transfer is the important equipment in the usage of nuclear energy. In the present work, heat transfer and entropy generation of an intermediate heat exchanger(IHX) in the accelerator driven subcritical system(ADS) are investigated experimentally. The variation of entropy generation number with performance parameters of the IHX is analyzed, and effects of inlet conditions of the IHX on entropy generation number and heat transfer are discussed. Compared with the results at two working conditions of the constant mass flow rates of liquid lead-bismuth eutectic(LBE) and helium gas, the total pumping power all tends to reduce with the decreasing entropy generation number, but the variations of the effectiveness, number of transfer units and thermal capacity rate ratio are inconsistent, and need to analyze respectively. With the increasing inlet mass flow rate or LBE inlet temperature, the entropy generation number increases and the heat transfer is enhanced, while the opposite trend occurs with the increasing helium gas inlet temperature. The further study is necessary for obtaining the optimized operation parameters of the IHX to minimize entropy generation and enhance heat transfer.

摘要：Oscillating heat pipes (OHPs) are very promising cooling devices. Their heat transfer performance is af- fected by many factors, and the form of the relationship between the performance and the factors is complex and non-linear. In this paper, the effects of charging ratio, inclination angle, and heat input and their interaction effects on heat transfer performance of a looped copper-water OHP are analyzed. First, suppose that the relationship between the response and the variables approximates a second-order model. And use the central composite design to arrange the ex- periment. Then, the method of least squares is used to estimate the parameters in the second-order model. Finally, multi- variate variance analysis is used to analyze the model. The results show that the assumption is right, that is to say, the re- lationship is well modeled by a second-order function. Among the three main effect variables, the effect of inclination angle is the most significant, but their interaction effects are not significant. In the range of the considered factors, both the optimum charging ratio and the optimum inclination angle increase as the heating water flow rate increases.

摘要：Thermal protection systems are very essential for high temperature thermal conductivity measurement system to reduce the heat loss to environment at the range of 600-1800 K. A compound multi-layer insulations structure which composed of inner carbon fibrous materials and outer alternately arranged alumina fibrous materials and high reflectivity foils is proposed for use in high temperature cylinder thermal protection systems. A coupled conductive and radiation governing equations is presented for heat transfer analysis of the structure. The finite volume method and the discrete ordinate method are used to solve the goveming equations. The optimization structure of the compound multi-layer insulations is investigated by considering the pressure of the gas, the density of the carbon fibrous materials, the density of the alumina fibrous materials, the number of reflective foil layers and the emissivity of reflective foils. The results show that the compound structure has the best thermal insulation performance when the pressure of the gas is below 0.01 kPa, the density of carbon fibrous materials is 180 kg m^-3, the density of alumina fibrous materials is 256 kg m^-3 and the number of reflective foil layers is 39. In addition, the thermal insulation performance is much better when the emissivity of reflective foils is lower.

摘要：The evolution of temperature field of the continual motion induction cladding and the depth of heat affected zone are studied in this study.A three-dimensional finite element model for the point type continual induction cladding is established to investigate temperature distributions of fixed and motion induction cladding *** novel inductor is designed for cladding of curved *** modeling reliability is verified by the temperature *** influence of process parameters on the maximum temperature and the generation and transfer of heat are *** calculation is performed to its melting rate to verify the temperature distribution and *** results show that a good metallurgical bond can be formed between the cladding layer and *** melting rate gradually falls from the top of the cladding layer to the substrate,and the grain size in the substrate gradually *** heat affected zone is relatively small compared to integral heating.

摘要：The heat transfer mathematic models are widely used in iron and steel industry area. Many computational models that represent this physical process is based on finite difference methods. The simulation of these phenomena demands a high computa- tional cost. In this paper we employ GPU for the development of algorithm for a two-dimensional heat transfer problem with f＇mite difference methods. The performance evaluation has been made and the comparison between CPU and GPU were discussed. The experimental result shows that GPU can solve this problem more efficiently when we need to divide calculation material into a large number of meshes.

摘要：Recent and constant demands for greater power densities and smaller sizes of electronic systems have stimulated the growth of new designs of different passive heat transfer methods such as heat pipes. Particularly, OHPs （Oscillating heat Pipes） are relatively novel devices, capable of removing high heat rates over long and short distances with not much temperature drop. This study concentrates on the design, building and assembling a test rig in order to analyse the flow pattern ofdeionised water through a 5 turns flat plate oscillating heat pipe under different heat inputs, which was made in the school of engineering and materials science of the Queen Mary University of London by two energy ***. students. The filling ratio of the water is 40%. Furthermore an experimental study on the OHP thermal performance is carried out in order to examine the effects of different surface wet conditions： super hydrophilic, hydrophilic and cleaned brass. It is demonstrated the formation of liquid slugs and vapour plugs of the water along the channels. The experimental results showed that the hydrophilic surface tends to be more energy efficient. The heat transfer performance of the super-hydrophilic and hydrophilic is higher than brass by 5-12% and 15-20% respectively.

摘要：Influence of strip self-rotating plastic spiral elements inserted in a tube on heat transfer enhancement is studied experimentally. The strip consists of 100 self-rotating spiral elements made of plastic polycarbonate inserted in the inner tube of a concentric tube heat exchanger with a view to generating swirl flow that helps to increase the heat transfer rate of the tube. Cold water flows in the annulus whereas the hot water flows in the inner tube. The obtained experimental data are compared with the data obtained from plain tube .Experimental results confirmed that the use of self-rotating plastic spiral elements leads to higher overall heat transfer coefficient than the plain tube. This technology is not only useful for heat transfer enhancement but also can be used for self cleaning deposition fouling in heat exchanger when the flow velocity is higher than 0.2 m/sec.

摘要：The coupling effect among the flow of fluid film, the frictional heat of fluid film and the thermal deformation of sealing rings is inherent in mechanical seals. The frictional heat transfer analysis was carded out to optimize the geometrical parameters of the sealing rings, such as the length, the inner radius and the outer radius. The geometrical parameters of spiral grooves, such as the spiral angle, the end radius, the groove depth, the ratio of the groove width to the weir width and the number of the grooves, were optimized by regarding the maximum bearing force of fluid film as the optimization objective with the coupling effect considered. The depth of spiral groove was designed to gradually increase from the end radius of spiral groove to the outer radius of end face in order to decrease the weakening effect of thermal deformation on the hydrodynamic effect of spiral grooves. The end faces of sealing rings were machined to form a divergent gap at inner radius, and a parallel gap will form to reduce the leakage rate when the thermal deformation takes place. The improved spiral groove mechanical seal possesses good heat transfer performance and sealing ability.

摘要：The heat exchanger network(HEN) synthesis problem based on entransy theory is analyzed. According to the characteristics of entransy representation of thermal potential energy, the entransy dissipation represents the irreversibility of the heat transfer process, the temperature difference determines the entransy dissipation, and four HEN design steps based on entransy theory are put forward. The present study shows how it is possible to set energy targets based on entransy and achieve them with a network of heat exchangers by an example of heat exchanger network design for four streams. In order to verify the correctness of the heat exchanger networks design method based on entransy theory, the synthesis of the HEN for the diesel hydrogenation unit is studied. Using the heat exchange networks design method based on entransy theory, the HEN obtained is consistent with energy targets. The entransy transfer efficiency of HEN based on entransy theory is 92.29%, higher than the entransy transfer efficiency of the maximum heat recovery network based on pinch technology.

摘要：The use of design method considering a coil temperature to maximize the thrust density of a double side coreless permanent magnet linear synchronous motor(PMLSM) was *** optimal current density where the coil temperature reaches an allowable temperature with heat analysis was applied to a magnetic circuit *** optimal current density is verified whenever the design parameters of the motor are *** design parameters of the motor were applied to thrust *** this way,the optimal model,which is a reversal of the existing design method,is *** results were compared with the experimental data to verify their *** the convection heat transfer coefficient is applied to other models,the results of the analysis and test values show good *** method proposed has some limitations.