摘要：The coupling effect among the flow of fluid film, the frictional heat of fluid film and the thermal deformation of sealing rings is inherent in mechanical seals. The frictional heat transfer analysis was carded out to optimize the geometrical parameters of the sealing rings, such as the length, the inner radius and the outer radius. The geometrical parameters of spiral grooves, such as the spiral angle, the end radius, the groove depth, the ratio of the groove width to the weir width and the number of the grooves, were optimized by regarding the maximum bearing force of fluid film as the optimization objective with the coupling effect considered. The depth of spiral groove was designed to gradually increase from the end radius of spiral groove to the outer radius of end face in order to decrease the weakening effect of thermal deformation on the hydrodynamic effect of spiral grooves. The end faces of sealing rings were machined to form a divergent gap at inner radius, and a parallel gap will form to reduce the leakage rate when the thermal deformation takes place. The improved spiral groove mechanical seal possesses good heat transfer performance and sealing ability.

摘要：The studies on the mechanisms and performances of the mechanical seals in reactor coolant pumps are very important for the safe operations of the pressurized water reactor power plants. Based on the hydrostatic mechanical seal in reactor coolant pumps, an analytical fluid-solid strong-interaction model is proposed in this paper. According to the design features and operafional principles of the seal, an analytical method to calculate the mechanical deformation of the seal assembly is developed based on the ring deformation theory. A strong-interaction algorithm combining the analysis of the mechanical deformation of the seal assembly and flow field between the seal faceplates is utilized, in which the three kinds of equations including the fluid domain, solid domain and coupling action are constituted in the same equations set and all the variables are solved simul- taneously. So the analytical fluid-solid strong-interaction model used for the seal is built. Moreover, the model is verified by the experimental results. Based on the model, the design parameters of the seal are studied. Two different conditions of the general case and fixed seal leakage rate are discussed respectively, and the regularities that the seal behaviors are affected by the parameters of the holding screws on the clamp rings and seal faceplates are obtained. The research results can provide a theoretical basis for performance analysis, design and assemblage of the seal. Compared to the numerical methods, the proposed model has the unique advantages of high efficiency, convenience and easy application of constraints.