摘要：In order to reduce the cogging torque, this paper investigates the influence of some parameters on the cogging torque developed by directly driven permanent magnet synchronous wind generators. Based on the remanent magnetic flux densities, the cogging torque is computed by using finite element method. It is shown that many parameters have influence on cogging torque and the slot and pole number combination has a significant effect on cogging torque. A simple factor has been introduced to indicate the effect of the slot and pole number combination. Some practical experience to reduce the cogging torque was applied to 2 MW three phase permanent magnet synchronous generator at rated speed of 37.5 rpm for wind energy conversion. The simulation and experiment results verify the effect of the proposed method.

摘要：A parallel dynamic passive valveless micropump was designed, which consists of three layers-valve, diaphragm and electromagnetic coil. The valve was wetly etched in a silicon wafer, the diaphragm was a PDMS （polydimethyl siloxane） film spun on a silicon wafer with embedded permanent magnet posts, and the coil was electroplated on a silicon substrate. Under the actuation of the magnetic field generated by coils, the flexible diaphragm could be displaced upwards and downwards. After analyzing magnetic and mechanical characteristic of the flexible membrane and direction-dependence of the nozzle, a micropump was designed. And the relative length （L/d） of the micropump nozzle was taken 4. A 7 × 7 array of permanent magnetic posts was embedded in the PDMS film. Two diaphragms worked in an anti-step mode, which could relieve the liquid shock and increase the discharge of the micropump. The ANSYS and Matlab were adopted to analyze the actuation effect of the coil and the flow characteristic of the micropump. Results show that when actuated under a 0.3 A, 100 Hz current, the displacement of the diaphragm is more than 30 μm, and the discharge of the micropump is about 6 μL/s.

摘要：The main design factors which effect on operating speed of solenoid actuator for valve operation are mass of plunger, electromagnetic motive force, inductance and return spring, and these factors are not independent but related with each other in view point of design and electromagnetic theory. It is impossible to increase the operating speed by only change the value of any one design factor. The change of any one value results in change of any value related it in various design factors. permanent magnets are as assistant materials which make higher flux density in air gap. Electromagnetic motive force in controlled only by current. This paper presents a speed increasing design method of solenoid actuator using a solenoid, by some governing equations which are composed of electromagnetic theory and empirical knowledge, and proved the propriety by experiments.

摘要：This paper presents the structural design and dynamic analysis of the magnetic field of the collector of machining wastes. From the viewpoint of energy the magnetic coupled force exerted on machining wastes by the nonuniform magnetic field of a permanent magnet has been discussed. The difficult problem that machining wastes attracted by a permanent magnet above the iron base platform has been solved.